1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

If you've done the fog light mod for a 2016

Discussion in '2.5 Gen Tundras (2014-2021)' started by Bear, Nov 4, 2016.

  1. Nov 4, 2016 at 7:26 AM
    #1
    Bear

    Bear [OP] Fargin' Iceholes

    Joined:
    Aug 24, 2016
    Member:
    #4301
    Messages:
    640
    Gender:
    Male
    First Name:
    Bear
    Custer, SD
    Vehicle:
    2022 GMC Sierra 3500 Dually
    Pulsar Edge V3; MBRP side dump exhaust
    Could someone PLEASE post a picture of their ECU harness of the wire they spliced into?? 2014-2016 models only please. The 2012 guys have been "helpful", but our set ups are not the same

    On the second connector down, the one described in the DIY thread, there are 2 pink wires.

    Those that have done this successfully, could you take a few moments and snap a photo of the actual wire tapped into?

    I have the right grey wire for the connector under the kick panel. Of that I am sure...

    Many thanks in advance!!
     
    GoHuskers likes this.
  2. Nov 4, 2016 at 7:32 AM
    #2
    GoHuskers

    GoHuskers New Member

    Joined:
    Sep 1, 2016
    Member:
    #4402
    Messages:
    407
    Gender:
    Male
    Nebraska
    Vehicle:
    '24 iForceMax, '17 RX350, '15 GX460
    I'm interested in this as well. Thanks in advance.
     
  3. Nov 4, 2016 at 7:37 AM
    #3
    ToyotaTundraMike

    ToyotaTundraMike Not A New Member

    Joined:
    Dec 14, 2015
    Member:
    #2256
    Messages:
    2,156
    Gender:
    Male
    First Name:
    Mike
    Vehicle:
    2015 Tundra
    Sounds like you should just try the other pink wire and see what happens.
     
  4. Nov 6, 2016 at 3:01 PM
    #4
    Bear

    Bear [OP] Fargin' Iceholes

    Joined:
    Aug 24, 2016
    Member:
    #4301
    Messages:
    640
    Gender:
    Male
    First Name:
    Bear
    Custer, SD
    Vehicle:
    2022 GMC Sierra 3500 Dually
    Pulsar Edge V3; MBRP side dump exhaust
    Yeah. Thanks but no. Not into just randomly cutting wires. Someone here...several of you 16 guys have done this successfully...be it by luck or other means...lol.

    A quick photo of the upper connector containing the pink wire would be amazing.

    hELP?!?!?
     

Products Discussed in

To Top