Stock Height Measurement

Does anyone know the stock height measurement on a double cab. Looking for middle of center cap to middle bottom edge of the fender flare. I installed some coilovers and forgot to measure my lift with the spacer the PO installed. Figured comparing my measurements to stock is the best bet.

Like this photo, but from center cap to fender (ground to fender is inaccurate as tire size changes truck to truck).

 

I believe it’s 22” center of hub to fender.

 

Wait, you realize his is a first GEN?

 

I retract that last statement, I have no clue then

 

Haha should have specified.

 

Does anybody have the measurements?

 

Someone will be along shortly to help ya.

Or you could go to the gas station and measure someones

 

I think all my measurements were ground to fender but I’ll check when I get home.

 

I have measurements for my Access Cab but I think the DC's are different.

 

Dc is very different than AC in gen 1

 

If anyone has a 2.5-3" lift on theirs I could go off that as well. Told myself for weeks to measure before I started my lift, but of course I didn't. Time to go creep on my business park for a Tundra.

 

I ain't that kinda guy

Besides I'm asking for someone else

 

do you have the measurements still?

 

I did measure my 06 before lift and the front was right around 20 inches from center of hub to bottom of fender flare.

 

Looking at my notes, I'm seeing about the same for my access cab.

 

weird if its around 20” then Im up like an 1.2” probably. I really regret not measuring before I put my struts in.

I think I measured along time ago and I was at 19-20” in the front but this confirms that thats what is was.

 

Mine was about 19.5” pre-lift