2018 Sequoia LED Headlight Harness For 2nd Gen Tundras

Looks good man! Thank you!

 

Total is about $1700, these are completely LED, so there are no bulbs that can be “changed”. Yes I also include installation instructions.

 

Finally had time for a few photos. I got the headlamps for the Limited/Platinum with the chrome at the very outside back edge (above orange side marker) to go with the rest of the chrome. The harness from @xrunnerdude67 was built as Option 1 which I believe is stock functionality with DRL.

Off, while the vehicle is not running or started with the key and the Park Brake set:



Dim, as they are after a remote start and/or running with the Parking Lights on and the Parking Brake not set. (They flash on/off at a frequency that is too quickly for us to see, but slow enough for the camera to catch so only some sections are illuminated in the photo:



Running with the Parking Brake released and DRL at full brightness as seen during normal driving:



Low Beams (taken with camera above beam cutoff so as not to "blind it"):



Brights: (taken with camera above beam cutoff so as not to "blind it")



...and signals (boomerangs/hockey sticks):





And an ENORMOUS thank you to @xrunnerdude67 for the harness build (Option 1). These aren't simply a bundle of wires held together with tape, they're all the correct connectors that make this Plug and Play, correct wire lengths that were figured out, a relay is necessary, the correct factory-type harness pin, fuse, and wire-tap connector (optional) was included and everything was encased in loom and fully taped up and/or heat-shrinked.

Addendum:
Oh, the filler panels look like they're Toyota's "Cement" color. They're currently unpainted actually. They blend in enough that I'm just going to wait until motorbike riding weather when the truck sits for weeks at a time to take them off to be painted.

 

Looks good man! Crazy how the DRL’s act, especially when taking a video. Haha thanks you!

 

@xrunnerdude67 think I want option 3 which would be nice to only have them on when parking/headlights on. You said that's completely plug and play right ?
Thinking of buying the lights from retrofit source.... Anyone Else buy from them ?
I have a 08 crewmax with no DRL

If I order soon what's lead time ?

 

My headlight will be delivered tom and filler just got painted
.allstoked

 

Was told when you get the trim filler pieces that you need the clips for it too. Is that true or have you guys been reusing the clips from the OE ones? My stock fillers broke off on the tabs that connect on the fender side a while ago so looking forward to new ones.

 

Mine same..id to remove the broken tab..to re use extension panel guard

 

One thing that kind of surprised me, was that these headlights seem to have a slightly different fitment than the stock ones. The gap between the grill and the headlight kind of opens up at the top near the hood. Not a huge deal, but did anyone else notice this? Or was it this way all along with the stock lights and i never noticed?

 

Ive noticed this right away..and ive been thinking of re cutting sides grill to contour with headlights and re paint grill???hmm

 

You can re-use them if they don't get buggered up during removal. Mine have been out several times and I used them again, although they're getting a little loose now. I'll probably gather another set the next time I'm near a dealer.

 

Got a couple here..ill replace mine when installing sequioa headlights

 

It’s defintely the Grill but, it doesn’t bother me at all

 

Did anybody tried a sequioa 2018 grill yet

 

Dont even know how you remove the trims without breaking these. I remember when i first removed my 08 headlights and they wouldnt pop loose. had to break them then put a screw through it to hold it in place lol.... real professional looking huh lol

 

Just pulled the trigger on Sequoia leds.... time to get a harness and the panels. and to sell my black led projectors if anyone wants them $150 shipped come with led bulbs.

 

I find they pop out pretty easily if you first remove the clips, rotate out and away from the truck, then rotate slightly downward toward the ground while applying a pulling force

 

I usually use a flat head screwdriver or trim removal tool. Take the clips out and then pull slightly outward away from the grille while putting a microfiber towel around the edge of my screwdriver/removal tool inserting it between the fender and the panel, twist it slowly until I hear a pop lol. I have removed mine at least 4-5 times, but now they’re out for good. Got a fresh pair for a 2018 Sequoia!

 

Payment sent Thanks @xrunnerdude67 looking forward to getting the harness

 

Oh snap

 

2nd shot

 

Ok quick question to you all. So all of us that are getting these leds I know there are 2 different ones one with chrome one without. And of course some of us have been looking on eBay, did anyone see the assweed that has the used one with busted tabs for $830 plus shipping
I sent him offer of course he rejected it I sent him a message and told him he was on crack he said he’s charging that much because it is the AFS version not the non AFS. Didn’t know of such a thing. Anyone know what AFS is ???

 

I believe the AFS is the adjuster but if I’m correct they don’t make the leds w the AFS ?? Thought I read that somewhere

 

AFS is Adaptive Frontal Lighting System, this moves the beams when you turn your steering wheel when turning. The Sequoia lights do NOT have AFS.

 

I can only find references to the AFS system in combination with projectors. I can't imagine that aspect of them working on the Tundras anyway, there'd almost unquestionably have to be an ECU and associated wiring and possibly sensors that'd be required. I don't recall seeing any reference to them on the various dealership sites I've been on while looking for mine, but I wasn't looking either.

 

Well, there you go then!

 

That was my thought I own an auto body shop and everything I could find mentioned nothing about AFS in those lights. Another ass on eBay not knowing what he’s selling !!!!

 

So i got this for 350 shipped the side tab is broken.i think an L shape bracket with couple rivets should fix it?
Is it worth it?
https://www.ebay.com/ulk/itm/153358122707

 

What is the difference between limited/platinum and other variants of sequoia led headlights.??

 

Platinums have chrome by the side markers.

Limited, SR5, & Sports have dark gray/black by the side markers.