My Front Blinkers Anger Me

The more I see my directionals in reflections it angers me. They're weak as shit, Toyota definitely dropped the ball on them. What is the easiest fix? New LED bulbs? The flashback setup or whatever it's called? Help me out, this is going to be my next mod.

 

I've been thinking the same thing. To the point I worry oncoming cars can't see me signaling. LEDs with resistor is the fix. I wish I did it when I installed my new headlights. I didn't wanna spend the extra cash but I know I will be soon. @BlueBottle I think is the man to talk to

 

The whole resistor thing is German to me. Where does it go?

 

I think it goes inline with the power wire to prevent hyperflash. Someone will know better than I.

 

I was thinking the same thing. Someone on here replaced them with these, plug and play but pretty expensive.



https://www.vleds.com/shop-application/turn-signals-front/7440/amber/v6-triton-kit-a-7443.html

 

What Jim linked is what I have. You can get them w plug and play resistors and not worry about anything. No splicing. Get 3ohm resistors per side if your doing led to both front and rear. 6 ohm is your only doing the front in led.

 

Thanks for the info. You have a video of the fronts in action?

 

Thanks for sharing, I'd pay for ease!

 

I do somewhere but Have no idea where it is lol. It’s somewhere in this site.

I have 2 sets of these resistors brand new. Each resistor will only take care of 1 led bulb. $12 shipped each or $20 shipped for both sets.
https://www.vleds.com/vlr-6-duotap.html

 

VLEDs are solid.

 

Found my video. Post #494

https://www.tundras.com/threads/bluebottles-16-plat-cm-build.7379/page-17#post-470602

 

For what its worth, I had a guy come up to me at the grocery store and tell me he can't see the turn signals of mine and other Tundra's. This after almost turning in front of me into the lot. I've had a couple other times where people at 4-way stop didn't realize I was turning. Once the guy told me, I knew I had to switch.

After searching quite a bit on here and learning a heck of a lot about LEDs and our trucks, I bought multiple LED bulb types including $60 LASFIT bulbs with canbus built in and a $40 LASFIT switchback w/o canbus. I returned both of these. I ended up with the $20/pair LASFIT 7443 bulbs on Amazon and they are brighter than bright. No canbus or resistors needed. No hyperflash and people definitely see me turning now. I have stock 2018 DC SR5 with LED headlights. Here's the one I bought on AMZ...hope it helps.

LASFIT 7443 LED Amber Bulb 7440 Turn Signal 992 T20 Super Bright High Power Blinker Light, Side Marker Light, Polarity Free Amber Yellow (Pack of 2),Need Resistor

https://www.amazon.com/gp/product/B077PXPR23/ref=ppx_od_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

 

Thanks for sharing man. I will try them. Can you post a video so we can see the brightness?

 

The OEM blinkers are dim. This is what I purchased. 4 min swap and done!!

$23 JDM ASTAR Extremely Bright PX Chips 7440 7441 7443 7444 Amber Yellow Turn Signal LED Bulbs

https://www.amazon.com/gp/product/B00PHVUWR8/ref=ppx_yo_dt_b_asin_title_o05__o00_s00?ie=UTF8&psc=1

 

They are UBER Bright!!! No video needed. Take my word for it.

 

No hyperflash with either Amazon buys?

 

I was wondering the same thing

 

What year is your truck? It says it will not fit a 2018.

 

As far as I know the JDM ASTAR's have a resistor built in

 

I just dropped $$$ on their site in a multi-bulb purchasing extravaganza as a result of this thread.

Once installed, expect a roller coaster of a thread replete with up to the minute feline/Great Dane poo updates

 

Here’s what I bought from VLEDS, and it didn’t require resistors. Plus it has LEDs on the front face of the “bulb”. Only $25 each. VLEDS is AWESOME to buy from / work with. Game changer in brightness, even during the day. I’ll post a video when I get home from work later tonight.

https://www.vleds.com/shop-application/turn-signals-front/7440/7443-50-hv-amber.html

 

I used the same bulb for the front indicators in my 18 SR5 with the OEM LED headlights and works without hyperflashing.

 

here's a link to my vid of LASFIT turn bulbs with headlights on...hopefully this works.

https://drive.google.com/open?id=1hmEKjCWli7aur8r6b8o-7abi3A79_E3D

 

Let me start by saying that I LOVE all my VLEDS bulbs and their customer service is the best in the biz but at $20 shipped to me I am getting these ^^^^.

 

Do the LASTFIT, JDM Astar or VLED bulbs for the front blinker still work as DRL?

 

The LASFIT does NOT work as DRL on the 2018 OEM headlights. I tried the $40/pair switchback model hoping it would. Only the amber illuminated during signaling only. The white stayed off.

 

I grabbed the lasfits for my 2019 thanks for posting up that info and video!

 

I just ordered these. For $20 we will see how long they last. 1 year warranty kinda worries me. I should see them Thursday. Will let you guys know.

 

Thanks! I just took a look at these, and my Amazon app says this product will NOT fit my 2018 Tundra. Is Amazon mistaken? Thanks again!

 

Dude Amazon, really cmon you dudes rock love em. And they gave my jackwagon nephew a job wooooooo hooooo rock on bro.