1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

110v outlets in bed and console (write-up)

Discussion in '2.5 Gen Tundras (2014-2021)' started by AlmightyCrash, Jan 7, 2019.

  1. Jan 7, 2019 at 3:00 PM
    #1
    AlmightyCrash

    AlmightyCrash [OP] Tundra Rookie, Jeep Veteran

    Joined:
    Nov 25, 2018
    Member:
    #22206
    Messages:
    762
    Gender:
    Male
    First Name:
    Crash
    San Leon, TX
    Vehicle:
    2015 Tundra MGM SR5 TSS CrewMax
    Hi everyone. I had a few people ask for a write up on this, so I’m happy to help....although there’s really not much to write up.
    The inverter I used was around $30 and claims to have a 500w-550w output from each of the two built in outlets. It also has two 2.1 usb outlets, but I didn’t utilize them for this project. I may extend them to flush mount ports at a later date.
    (Stock photo because I forgot to take photo before mounting it)

    7EDF386D-03C2-471E-9075-3664014114E3.jpg

    I mounted it under the drivers seat with the outlets facing the center console. I ran a 8g ground through the floorboard and grounded it to the frame, then an 8g wire to the positive side of the battery.

    I chose this outlet for the back of the console mainly due to aesthetics and the fact that it adds USB ports. It also comes pre-wired with an extension cord to plug into the inverter.

    83E807E6-9EDC-49F1-B5C9-7103B8B646DF.jpg

    I went with a different shape for the one in the bed, but it comes prewired also...though I did need a single 6ft extension cord to reach the inverter.
    I taped off the outlets and bedlined it so it would blend in more.
    Even though my bedcover doesn’t leak, I am still designing a cover for the unit.

    004FBDA6-6DDB-4A6F-A2A1-BFD84AF0EBEB.jpg

    I suggest removing the light and tailgate shock when cutting, just in case...so you don’t damage them.

    That’s really all there is to it, but I’m always happy to answer any questions.
     
  2. Jan 7, 2019 at 3:22 PM
    #2
    timsp8

    timsp8 Former Tundra owner for 13 years

    Joined:
    May 11, 2018
    Member:
    #15231
    Messages:
    3,524
    Gender:
    Male
    First Name:
    Tim
    NY
    Vehicle:
    2018 Tundra Limited Crewmax - Traded In
    What brand are the outlets? Are they prewired to any inverter?
     
  3. Jan 7, 2019 at 3:39 PM
    #3
    AlmightyCrash

    AlmightyCrash [OP] Tundra Rookie, Jeep Veteran

    Joined:
    Nov 25, 2018
    Member:
    #22206
    Messages:
    762
    Gender:
    Male
    First Name:
    Crash
    San Leon, TX
    Vehicle:
    2015 Tundra MGM SR5 TSS CrewMax
    I’ll find links for you, but they are both wired with standard three prong plugs. Round one has a 6ft cord. Rectangular one has a 9ft cord.
     
    OR18TRD and Jim LE 1301 like this.
  4. Jan 7, 2019 at 3:43 PM
    #4
    AlmightyCrash

    AlmightyCrash [OP] Tundra Rookie, Jeep Veteran

    Joined:
    Nov 25, 2018
    Member:
    #22206
    Messages:
    762
    Gender:
    Male
    First Name:
    Crash
    San Leon, TX
    Vehicle:
    2015 Tundra MGM SR5 TSS CrewMax
  5. Jan 7, 2019 at 3:57 PM
    #5
    Hondoman

    Hondoman New Member

    Joined:
    Mar 12, 2018
    Member:
    #13519
    Messages:
    1,460
    Gender:
    Male
    First Name:
    Jeff
    Dfw Texas
    Vehicle:
    2015 SR5 CM 4x4
  6. Jan 7, 2019 at 4:01 PM
    #6
    Berdine

    Berdine Voodoo Sport

    Joined:
    Aug 2, 2017
    Member:
    #8877
    Messages:
    1,901
    Gender:
    Male
    First Name:
    Frank
    Binghamton, NY
    Vehicle:
    2020 VooDoo Blue Trd Sport
    That's awesome! Great job!
     
  7. Jan 7, 2019 at 4:09 PM
    #7
    timsp8

    timsp8 Former Tundra owner for 13 years

    Joined:
    May 11, 2018
    Member:
    #15231
    Messages:
    3,524
    Gender:
    Male
    First Name:
    Tim
    NY
    Vehicle:
    2018 Tundra Limited Crewmax - Traded In
    Thanks. Nice job. Looks like it came there from Toyota. I’ve been meaning to do this for years. I think some tundras and sequoias came with an inverter and power outlet, but it’s overpriced. I was looking at a cobra professional 1500w or 2000w.
     
  8. Jan 7, 2019 at 4:12 PM
    #8
    AlmightyCrash

    AlmightyCrash [OP] Tundra Rookie, Jeep Veteran

    Joined:
    Nov 25, 2018
    Member:
    #22206
    Messages:
    762
    Gender:
    Male
    First Name:
    Crash
    San Leon, TX
    Vehicle:
    2015 Tundra MGM SR5 TSS CrewMax
    No. It isn’t. Thats why I’m designing a cover for it, as stated...even though it’s out of the elements when my bedcover is closed.

    I searched for days to find an outdoor one that would fit in the bed that was more than a single outlet. I couldn’t find anything.

    Also, all outdoor units are open on the backside, which would leave everything exposed. This is a sealed unit.
     
    Last edited: Jan 7, 2019
  9. Jan 8, 2019 at 8:44 AM
    #9
    hpeeler

    hpeeler New Member

    Joined:
    Feb 16, 2016
    Member:
    #2706
    Messages:
    13
    Gender:
    Male
    Does the inverter have a switch on it?
     
  10. Jan 8, 2019 at 8:46 AM
    #10
    PinoyRN

    PinoyRN Manila Gorilla

    Joined:
    Sep 12, 2016
    Member:
    #4516
    Messages:
    87
    Gender:
    Male
    First Name:
    Sammy
    Phoenix, AZ
    Vehicle:
    ‘06 Tundra
    Will this work with the truck off? Also, at what point do I need to think about a secondary battery...I already have AMP research steps and a rough country light bar hooked up to my battery.
     
  11. Jan 8, 2019 at 9:34 AM
    #11
    AlmightyCrash

    AlmightyCrash [OP] Tundra Rookie, Jeep Veteran

    Joined:
    Nov 25, 2018
    Member:
    #22206
    Messages:
    762
    Gender:
    Male
    First Name:
    Crash
    San Leon, TX
    Vehicle:
    2015 Tundra MGM SR5 TSS CrewMax
    This one doesn’t, but there are those that do.
     
  12. Jan 8, 2019 at 9:38 AM
    #12
    AlmightyCrash

    AlmightyCrash [OP] Tundra Rookie, Jeep Veteran

    Joined:
    Nov 25, 2018
    Member:
    #22206
    Messages:
    762
    Gender:
    Male
    First Name:
    Crash
    San Leon, TX
    Vehicle:
    2015 Tundra MGM SR5 TSS CrewMax
    Yes, this is hooked to constant power.
    Your steps only use power when extended, and light bar only when it’s on, so you should still be fine with one battery.
    I chose to install an in-dash voltmeter so I can see if the battery starts to drain and start the truck to charge it back up.

    Another option is to get a battery that is both a deep cycle and a starting battery. That type will help with running many accessories at once with the engine off.
     
    twistedcricket and TundraMash like this.
  13. Jan 8, 2019 at 9:54 AM
    #13
    PinoyRN

    PinoyRN Manila Gorilla

    Joined:
    Sep 12, 2016
    Member:
    #4516
    Messages:
    87
    Gender:
    Male
    First Name:
    Sammy
    Phoenix, AZ
    Vehicle:
    ‘06 Tundra
    Awesome, thanks for the info. I’m a newb when it comes to this stuff :boom:
     
  14. Jan 10, 2019 at 12:23 PM
    #14
    lamikela1

    lamikela1 New Member

    Joined:
    Oct 9, 2018
    Member:
    #20345
    Messages:
    162
    Gender:
    Male
    First Name:
    Michael
    Vehicle:
    2019 Silver Sky Platinum Tundra 4X4
    Revolver X4 cover, Bedrug, Pocket Flares. Previously owned... '86 Hilux, '94 4-Runner '95 Taco, '05 Taco
    Just keep in mind that for a 12V 2000W inverter at full load you will be drawing over 160 Amps. Better get the correct wire size or your truck will go up in flames. Also long runs may require even larger wire. Also this should be switched, key or panel switch, to protect the battery. Best case is that the inverter has a control lead that allows you to turn it on/off. Otherwise the switch would need to be rated the same as the wire.
     
  15. Jan 10, 2019 at 2:13 PM
    #15
    timsp8

    timsp8 Former Tundra owner for 13 years

    Joined:
    May 11, 2018
    Member:
    #15231
    Messages:
    3,524
    Gender:
    Male
    First Name:
    Tim
    NY
    Vehicle:
    2018 Tundra Limited Crewmax - Traded In
    I didn’t think about the draw on the alternator. Guess I’ll go with 1000w or 1500w. I just wanted the bigger one to have the power if I needed it. Also just got the genesis dual battery kit in so it’ll be on it’s own battery. Cobra’s also have a power switch so they aren’t always on or on when the truck starts.
     
  16. Jan 15, 2019 at 11:58 PM
    #16
    SpeshulED

    SpeshulED New Member

    Joined:
    Jul 24, 2017
    Member:
    #8726
    Messages:
    334
    Gender:
    Male
    Sandy Eggo/Chula Vista, So Cal.
    Vehicle:
    2015 Mag Gry Ltd. CM TRD Tundra
    TRD Pro Grill | AMP Steps | Husky Floor Mats | SnugTop Sportsman Super Sport Shell | 55w 5k HID Headligts | Method Racing NV Bronze 18x9 | BFG KO2 35x12.5r18
    Did you add heated seats for the rear? What’s the switch on the sides of the cig lighter outlet?
     
  17. Jan 16, 2019 at 4:33 AM
    #17
    AlmightyCrash

    AlmightyCrash [OP] Tundra Rookie, Jeep Veteran

    Joined:
    Nov 25, 2018
    Member:
    #22206
    Messages:
    762
    Gender:
    Male
    First Name:
    Crash
    San Leon, TX
    Vehicle:
    2015 Tundra MGM SR5 TSS CrewMax
  18. Apr 30, 2019 at 4:12 PM
    #18
    DesertRoads

    DesertRoads Telecom Guy

    Joined:
    Apr 21, 2019
    Member:
    #29435
    Messages:
    205
    Utah's West Desert
    Vehicle:
    2005 DC SR5 V8 4WD LSD & TOW PKG
    LED Lights Galore, My Factory Skid Plate Was Stolen
    So did you "disassemble" the inverter and just moved the outlets to the mounting locations?
     
  19. Apr 30, 2019 at 4:40 PM
    #19
    Berdine

    Berdine Voodoo Sport

    Joined:
    Aug 2, 2017
    Member:
    #8877
    Messages:
    1,901
    Gender:
    Male
    First Name:
    Frank
    Binghamton, NY
    Vehicle:
    2020 VooDoo Blue Trd Sport

    No, he used extension cords and added new outlets
     
  20. May 8, 2019 at 9:26 PM
    #20
    Califspine

    Califspine Califspine

    Joined:
    Jan 14, 2019
    Member:
    #24520
    Messages:
    6
    Gender:
    Male
    First Name:
    Ron
    Bell Canyon, UT
    Vehicle:
    2020 1794 with TRD Pkg
    Almighty Crash, I ordered and just received the exact inverter you installed. My question is how did you mount/secure the inverter under the seat? Also, where did you breach the firewall for the positive lead to the battery?
     
  21. May 8, 2019 at 10:29 PM
    #21
    916tundra

    916tundra New Member

    Joined:
    Mar 13, 2019
    Member:
    #27539
    Messages:
    343
    Gender:
    Male
    First Name:
    Ken
    Vehicle:
    2017 Tundra Crewmax
  22. May 9, 2019 at 9:57 AM
    #22
    AlmightyCrash

    AlmightyCrash [OP] Tundra Rookie, Jeep Veteran

    Joined:
    Nov 25, 2018
    Member:
    #22206
    Messages:
    762
    Gender:
    Male
    First Name:
    Crash
    San Leon, TX
    Vehicle:
    2015 Tundra MGM SR5 TSS CrewMax
    You can Velcro it to the carpet, and it won’t go anywhere.
    The 12v wire enters through the rubber grommet that all of the other factory wires come through.
     
  23. May 9, 2019 at 11:47 AM
    #23
    flinky14

    flinky14 If I'm the wife, who says no to new mods?

    Joined:
    Apr 10, 2019
    Member:
    #28898
    Messages:
    109
    Gender:
    Female
    First Name:
    Genna
    Alberta
    Vehicle:
    2019 Tundra CM Platinum 4x4
    -TRD Dual Exhaust - 3m - UV front window tint/rear limo tint -TRD Oil Cap -Toyota Bed Mat - TRD Pro Grille - ARE canopy (sliding Windoors, pop down sliding front window, headliner, rack rails) -OEM Toyota Remote Starter -Baja Designs Sport Fog Lights -TRD door sill protectors -Ronin Factory short antenna
  24. Jun 9, 2019 at 5:34 PM
    #24
    handyman

    handyman New Member

    Joined:
    Apr 10, 2019
    Member:
    #28892
    Messages:
    128
    Gender:
    Male
    Vehicle:
    2016 Crewmax Limited in Sunset Bronze Mica
    BFG All-Terrain TA KO2 Tires, Pillar Grab Handle, Curt Front Hitch & Winch Mount, Smittybilt XRC-8 Winch, Escort Solo S3 Radar Detector, Tekonsha P3 Brake Controller, Galaxy DX 2547 CB Radio, Center Console Organizer & Tray, ESP Rear Seat Storage, SumoSprings, Pop & Lock Tailgate Lock, AMP Bed Step, AMP Side Steps, BacFlip G2 Tonneau Cover, and more pending.
    I simply plug an inverter similar to yours into the trailer hitch receiver wiring connector when I need 120v power to that area. With diagrams all over the internet showing the proper pins to use (12v positive & negative) for the various plugs (4-pin, 5-pin, 7-pin, etc), wiring the plug was super easy

    Since most of my power tools are cordless, I got it mainly for the two 120v air pumps (120v pumps are stronger & quicker than 12v) for my inflatable boat. However, I have used the inverter to power a few small shop tools (band saw, belt sander, etc) while on location. I've also used it for the air compressor when airbrushing (fishing lures, etc) at remote camp sites. When the inverter is not being used, it's tossed into the bed toolbox with my other tools.
     
  25. Mar 8, 2020 at 7:12 AM
    #25
    russellmoran

    russellmoran New Member

    Joined:
    Mar 8, 2020
    Member:
    #43658
    Messages:
    16
    Gender:
    Male
    First Name:
    Russell
    Vehicle:
    2018 1794 Tundra 4x4
    USB Ports, Linex, Aftermarket Su
    I want to get a 500W converter and add 2 of these grommet units (1 where you have it and 1 in the front seat somewhere). My question is, so I have to wire direct to the battery? Can I tap into wire from a cigarette lighter or similar? Mainly using it to charge my laptop on travel, etc... Thanks @AlmightyCrash
     
    Last edited: Mar 9, 2020
  26. Mar 13, 2020 at 10:39 AM
    #26
    russellmoran

    russellmoran New Member

    Joined:
    Mar 8, 2020
    Member:
    #43658
    Messages:
    16
    Gender:
    Male
    First Name:
    Russell
    Vehicle:
    2018 1794 Tundra 4x4
    USB Ports, Linex, Aftermarket Su
    I want to get a 500W converter and add 2 of these grommet units (1 where he has it and 1 in the front seat somewhere). My question is, do I have to wire direct to the battery? Can I tap into wire from a cigarette lighter or similar? Mainly using it to charge my laptop on travel, etc..just don’t want the catch fire using a smaller wire to get power. Thanks @lamikela1
     
  27. Mar 20, 2020 at 6:58 AM
    #27
    lamikela1

    lamikela1 New Member

    Joined:
    Oct 9, 2018
    Member:
    #20345
    Messages:
    162
    Gender:
    Male
    First Name:
    Michael
    Vehicle:
    2019 Silver Sky Platinum Tundra 4X4
    Revolver X4 cover, Bedrug, Pocket Flares. Previously owned... '86 Hilux, '94 4-Runner '95 Taco, '05 Taco
    For 500 watts you would be pulling about 42 amps at full load. You would need a power source that has a number 6-8 wire size to be safe.
     
  28. Mar 20, 2020 at 7:04 AM
    #28
    russellmoran

    russellmoran New Member

    Joined:
    Mar 8, 2020
    Member:
    #43658
    Messages:
    16
    Gender:
    Male
    First Name:
    Russell
    Vehicle:
    2018 1794 Tundra 4x4
    USB Ports, Linex, Aftermarket Su
    Thanks so much. I created a new thread to ask questions. I’ve learned my inverter has two 40 amp fuses and my sub that is currently running power has 100amp. I’m needing 180 amp so I’m using a 1/0 gauge wire with a 300Amp in-line fuse then a power distributor to distribute power to both devices. There’s much more to it (relays, switches, etc) but that’s the jest of it. Thanks
     
  29. Mar 20, 2020 at 7:57 AM
    #29
    Bigolbaddy

    Bigolbaddy New Member

    Joined:
    Oct 3, 2019
    Member:
    #36961
    Messages:
    214
    Gender:
    Male
    First Name:
    Ben
    Fort Worth
    Vehicle:
    2020 MGM 1794
    What paint did you use/find that bedlined the outlet. I need to do that for something else. Thanks
     
  30. Mar 22, 2020 at 2:14 PM
    #30
    lamikela1

    lamikela1 New Member

    Joined:
    Oct 9, 2018
    Member:
    #20345
    Messages:
    162
    Gender:
    Male
    First Name:
    Michael
    Vehicle:
    2019 Silver Sky Platinum Tundra 4X4
    Revolver X4 cover, Bedrug, Pocket Flares. Previously owned... '86 Hilux, '94 4-Runner '95 Taco, '05 Taco
    Ok. Sounds like you are on the right track.
     
To Top