Ok so what did I screw up here

it all started when this guy on a forum named @Roman stsrted raiding my checking account like a Viking in a English Monestary

He got me for the 2018 led fogs
I figured hey I installed the 2019 pro led headlights and harness from @iHacker so I can handle this lol
Ya ok good one

I had seen a video of the fogs being removed from the front of the bumper and not having to remove the lower liner
Great I thought

Start on drivers side and bam fog light popped right out but I could not get it unplugged
So I started to remove the 10mm and 2 12mm bolts for the lower wheel well liner and in trying to remove it I broke the top outer clip and I think I lost the two clips that secure the front mid flap bolts
It’s all back together but I have 3 10mm (socket size)
Left over.
The two for the mid flap and one that goes under the bumper on the outside corner
The liner is secure there is the same movement as the passanger side only short 3 bolts
So what did I do wrong and should I even worry about it.
The passenger side light changed out just fine without having to mess with the liner at all
Ya I figured that shit out lol
Lights work also going to try them out when it gets dark
Anyway here are some pics

 

I can't help with the leftover parts, but the lights look great.

 

Nah, those bolts were superfluous.

 

Best use of a word I've seen on the forum today. You get the trophy.

 

So nothing to fret about then?

 

I think what he is saying is superfluity does not need to be fretted.

 

Lights looks awesome, excess bolts? If you have driven it down the street and back and nothing has fallen off then you can consider the fact that while modding the lights you have also started doing mods for better performance. Weight savings on a vehicle especially the front helps with fuel mileage and acceleration. Lol

 

I took it for a test drive snd there was no movement in the fog lights
Everything was fine
Will try to get pics in the. Morning

 

Boom

 

I installed my BD fogs last night and did the exact same thing. I broke the driver side but I have OCD and couldn’t leave it be so I broke the passenger side so that it’s even.

Seems to be holding just fine like yours. Wouldn’t stress about it.

 

I’ve got missing clips all over the place, if it ain’t vibrating or falling off, I’m good.

 

I wanna see PRO headlights

 

Here’s what I would have done in the past, use your cell phone to take pictures of each steps that you do.that way you have a hirekey of the path you took and where you want to be at the end.
I do this at work to document the way I take apart complex equipment ,wiring, and such. I think you get the picture....

 

I used the passenger side a reference, but ya I get what you are saying lol.

 

I will take some pics when I get to work, and post them later today.

 

@ARamirez73

 

Freaking sweet!

 

Thanks, I got the @iHacker always on high harness, as you can see it keeps the amber DRL with the LED DRL. Was the easiest for me to complete, trust me, after yesterday with the fogs, this was the best option ad I like it.

 

I'm debating weather with or without ambers

 

Well now you see what the option with the ambers on looks like lol

 

What do the 2018s have? Do they have by default, the amber DRLs or it just she led ring that comes on as you turn the ignition?

 

My 18 has just the LED ring for the DRL.