1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: AC Performance Camper Top Using Rail Mounts?? Help finding parts Fuel Pump ECU Connector Terminal Size Redline Fuel System Cleaner - Gas and Injector Additive Treatment How to install backup camera in 2010? Water Pump, Radiator, Thermostat, Head Gasket Replacement for 2007 5.7L

Steering rack bushing help!

Discussion in '2nd Gen Tundras (2007-2013)' started by TexasTundra27, Jul 4, 2018.

Page 1 of 2
  1. Jul 4, 2018 at 6:00 AM
    #1
    TexasTundra27

    #1
    TexasTundra27 [OP] Moby Dick

    Joined:
    Feb 27, 2017
    Member:
    #6561
    Messages:
    412
    Gender:
    Male
    First Name:
    Mark
    Texas
    Vehicle:
    2011 Tundra CM 4x4 5.7
    Icon stage 3, Icon billet UCAs, 5.29s, ARB lockers F+R, Coachbuilder +2s and shims, Rago fab ditch light brackets and bed stiffeners, Rago Fabrication sliders, ARE camper, 17x9 XDs and 37/12.5/17 stt pros, DT long tubes, xpipe with dual magnaflows, Full skids, TrailToys front and rear bumpers
    I’m having a hard time getting the upper driver side bushing out, it’s hitting the oil filter housing. People that have done this before, how did you get it out?? Need HELP!
     
    TexasTundra27, Jul 4, 2018
    #1
  2. Jul 4, 2018 at 6:17 AM
    #2
    ColoradoTJ

    #2
    ColoradoTJ Certified tow LEO Staff Member

    Joined:
    Feb 24, 2016
    Member:
    #2766
    Messages:
    40,400
    Gender:
    Male
    Colorado
    Vehicle:
    GMC 3500, Roush Mustang, Jeep Crawler
    Calibrated Power 5 Tune pack, Allison 1000 tune, PPE deep trans pan, Cold/Hot CAC pipes, Banks CAI, PCV reroute, resonator delete, S&B 62 gal fuel tank, B&W GN hitch
    Oil filter housing has to come out.
     
    ColoradoTJ, Jul 4, 2018
    #2
    Prostar 190, Black Wolf, TexasTundra27[OP] and 1 other person like this.
  3. Jul 4, 2018 at 6:24 AM
    #3
    TexasTundra27

    #3
    TexasTundra27 [OP] Moby Dick

    Joined:
    Feb 27, 2017
    Member:
    #6561
    Messages:
    412
    Gender:
    Male
    First Name:
    Mark
    Texas
    Vehicle:
    2011 Tundra CM 4x4 5.7
    Icon stage 3, Icon billet UCAs, 5.29s, ARB lockers F+R, Coachbuilder +2s and shims, Rago fab ditch light brackets and bed stiffeners, Rago Fabrication sliders, ARE camper, 17x9 XDs and 37/12.5/17 stt pros, DT long tubes, xpipe with dual magnaflows, Full skids, TrailToys front and rear bumpers
    Don’t put that evil on me! This is probably a stupid question, but would I need to drain the oil to remove it?
     
    TexasTundra27, Jul 4, 2018
    #3
    ColoradoTJ[QUOTED] likes this.
  4. Jul 4, 2018 at 6:27 AM
    #4
    15whtrd

    #4
    15whtrd Mr. Blonde

    Joined:
    Sep 20, 2015
    Member:
    #1829
    Messages:
    9,376
    Gender:
    Male
    First Name:
    Sean
    SoCal
    Vehicle:
    White 2015 Tundra DC SR5 TRD 4x4 5.7L, White 2003 Sequoia 2WD
    TRD Pro suspension, +2 Coachbuilder shackles, 2015 TRD Pro headlights, 20% ceramic tinted windows, clear ceramic tinted front windshield, aFe drop in pro s dry air filter, TRD airflow accelerator, TRD oil fill cap, TRD 18 psi radiator cap, BDX Bullydog tuner, Weathertech floor mats front and rear, rear seat fold down mod, DNA hard trifold tonneau cover, Linex with uv protection, TRD rear swaybar, TRD center caps, TRD Pro grille insert with color matching surround and bulge, TRD PRO headlights, aluminum oil filter canister, Real truck tailgate seal, Pop-n-lock tailgate lock actuator, rear diff breather relocate, RCI front skid plate. 275/70 R18 BFG KO2s
    No. Just drain the filter housing, then remove. Actually you don’t even have to drain it, it will just be less of a mess if you do. And when you’re done just reinstall, or put a new filter in and cycle the engine. Then top off whatever amount of fluid it needs.
     
    15whtrd, Jul 4, 2018
    #4
    Prostar 190, 831Tun, Black Wolf and 2 others like this.
  5. Jul 4, 2018 at 6:28 AM
    #5
    TexasTundra27

    #5
    TexasTundra27 [OP] Moby Dick

    Joined:
    Feb 27, 2017
    Member:
    #6561
    Messages:
    412
    Gender:
    Male
    First Name:
    Mark
    Texas
    Vehicle:
    2011 Tundra CM 4x4 5.7
    Icon stage 3, Icon billet UCAs, 5.29s, ARB lockers F+R, Coachbuilder +2s and shims, Rago fab ditch light brackets and bed stiffeners, Rago Fabrication sliders, ARE camper, 17x9 XDs and 37/12.5/17 stt pros, DT long tubes, xpipe with dual magnaflows, Full skids, TrailToys front and rear bumpers
    Ok... thanks for the help fellas
     
    TexasTundra27, Jul 4, 2018
    #5
    15whtrd likes this.
  6. Jul 4, 2018 at 6:29 AM
    #6
    ColoradoTJ

    #6
    ColoradoTJ Certified tow LEO Staff Member

    Joined:
    Feb 24, 2016
    Member:
    #2766
    Messages:
    40,400
    Gender:
    Male
    Colorado
    Vehicle:
    GMC 3500, Roush Mustang, Jeep Crawler
    Calibrated Power 5 Tune pack, Allison 1000 tune, PPE deep trans pan, Cold/Hot CAC pipes, Banks CAI, PCV reroute, resonator delete, S&B 62 gal fuel tank, B&W GN hitch
    Better than dropping the diff or removing the motor Ricky Bobby. :D
     
    ColoradoTJ, Jul 4, 2018
    #6
    mtntop, landphil, ldale and 3 others like this.
  7. Jul 4, 2018 at 6:31 AM
    #7
    TexasTundra27

    #7
    TexasTundra27 [OP] Moby Dick

    Joined:
    Feb 27, 2017
    Member:
    #6561
    Messages:
    412
    Gender:
    Male
    First Name:
    Mark
    Texas
    Vehicle:
    2011 Tundra CM 4x4 5.7
    Icon stage 3, Icon billet UCAs, 5.29s, ARB lockers F+R, Coachbuilder +2s and shims, Rago fab ditch light brackets and bed stiffeners, Rago Fabrication sliders, ARE camper, 17x9 XDs and 37/12.5/17 stt pros, DT long tubes, xpipe with dual magnaflows, Full skids, TrailToys front and rear bumpers
    The real shitty part is I have to do all of this just to drop it off at the dealer tomorrow for timing chain tensioners and Cam tower seals...
     
    TexasTundra27, Jul 4, 2018
    #7
  8. Jul 4, 2018 at 6:32 AM
    #8
    ColoradoTJ

    #8
    ColoradoTJ Certified tow LEO Staff Member

    Joined:
    Feb 24, 2016
    Member:
    #2766
    Messages:
    40,400
    Gender:
    Male
    Colorado
    Vehicle:
    GMC 3500, Roush Mustang, Jeep Crawler
    Calibrated Power 5 Tune pack, Allison 1000 tune, PPE deep trans pan, Cold/Hot CAC pipes, Banks CAI, PCV reroute, resonator delete, S&B 62 gal fuel tank, B&W GN hitch
    Wow! How many miles on your truck?
     
    ColoradoTJ, Jul 4, 2018
    #8
    15whtrd likes this.
  9. Jul 4, 2018 at 6:32 AM
    #9
    15whtrd

    #9
    15whtrd Mr. Blonde

    Joined:
    Sep 20, 2015
    Member:
    #1829
    Messages:
    9,376
    Gender:
    Male
    First Name:
    Sean
    SoCal
    Vehicle:
    White 2015 Tundra DC SR5 TRD 4x4 5.7L, White 2003 Sequoia 2WD
    TRD Pro suspension, +2 Coachbuilder shackles, 2015 TRD Pro headlights, 20% ceramic tinted windows, clear ceramic tinted front windshield, aFe drop in pro s dry air filter, TRD airflow accelerator, TRD oil fill cap, TRD 18 psi radiator cap, BDX Bullydog tuner, Weathertech floor mats front and rear, rear seat fold down mod, DNA hard trifold tonneau cover, Linex with uv protection, TRD rear swaybar, TRD center caps, TRD Pro grille insert with color matching surround and bulge, TRD PRO headlights, aluminum oil filter canister, Real truck tailgate seal, Pop-n-lock tailgate lock actuator, rear diff breather relocate, RCI front skid plate. 275/70 R18 BFG KO2s
    On your dime or theirs?
     
    15whtrd, Jul 4, 2018
    #9
  10. Jul 4, 2018 at 6:35 AM
    #10
    TexasTundra27

    #10
    TexasTundra27 [OP] Moby Dick

    Joined:
    Feb 27, 2017
    Member:
    #6561
    Messages:
    412
    Gender:
    Male
    First Name:
    Mark
    Texas
    Vehicle:
    2011 Tundra CM 4x4 5.7
    Icon stage 3, Icon billet UCAs, 5.29s, ARB lockers F+R, Coachbuilder +2s and shims, Rago fab ditch light brackets and bed stiffeners, Rago Fabrication sliders, ARE camper, 17x9 XDs and 37/12.5/17 stt pros, DT long tubes, xpipe with dual magnaflows, Full skids, TrailToys front and rear bumpers
    180k... not happy...
    mine... $3000 worth
     
    TexasTundra27, Jul 4, 2018
    #10
  11. Jul 4, 2018 at 6:36 AM
    #11
    15whtrd

    #11
    15whtrd Mr. Blonde

    Joined:
    Sep 20, 2015
    Member:
    #1829
    Messages:
    9,376
    Gender:
    Male
    First Name:
    Sean
    SoCal
    Vehicle:
    White 2015 Tundra DC SR5 TRD 4x4 5.7L, White 2003 Sequoia 2WD
    TRD Pro suspension, +2 Coachbuilder shackles, 2015 TRD Pro headlights, 20% ceramic tinted windows, clear ceramic tinted front windshield, aFe drop in pro s dry air filter, TRD airflow accelerator, TRD oil fill cap, TRD 18 psi radiator cap, BDX Bullydog tuner, Weathertech floor mats front and rear, rear seat fold down mod, DNA hard trifold tonneau cover, Linex with uv protection, TRD rear swaybar, TRD center caps, TRD Pro grille insert with color matching surround and bulge, TRD PRO headlights, aluminum oil filter canister, Real truck tailgate seal, Pop-n-lock tailgate lock actuator, rear diff breather relocate, RCI front skid plate. 275/70 R18 BFG KO2s
    :eek: Im sorry man.
     
    15whtrd, Jul 4, 2018
    #11
  12. Jul 4, 2018 at 6:38 AM
    #12
    ColoradoTJ

    #12
    ColoradoTJ Certified tow LEO Staff Member

    Joined:
    Feb 24, 2016
    Member:
    #2766
    Messages:
    40,400
    Gender:
    Male
    Colorado
    Vehicle:
    GMC 3500, Roush Mustang, Jeep Crawler
    Calibrated Power 5 Tune pack, Allison 1000 tune, PPE deep trans pan, Cold/Hot CAC pipes, Banks CAI, PCV reroute, resonator delete, S&B 62 gal fuel tank, B&W GN hitch
    Little surprised with the timing chain tensioners, but the tower leaks can happen a 5-200k miles.
     
    ColoradoTJ, Jul 4, 2018
    #12
    TexasTundra27[OP] likes this.
  13. Jul 4, 2018 at 6:42 AM
    #13
    Pale_Horse

    #13
    Pale_Horse Sooooooooo White.

    Joined:
    May 18, 2018
    Member:
    #15430
    Messages:
    286
    Gender:
    Male
    FL
    Vehicle:
    White 2013 TRD OR 4x4 DC
    Cupcake chit.
    Pale_Horse, Jul 4, 2018
    #13
    TexasTundra27[QUOTED][OP] and 15whtrd like this.
  14. Jul 4, 2018 at 6:53 AM
    #14
    TexasTundra27

    #14
    TexasTundra27 [OP] Moby Dick

    Joined:
    Feb 27, 2017
    Member:
    #6561
    Messages:
    412
    Gender:
    Male
    First Name:
    Mark
    Texas
    Vehicle:
    2011 Tundra CM 4x4 5.7
    Icon stage 3, Icon billet UCAs, 5.29s, ARB lockers F+R, Coachbuilder +2s and shims, Rago fab ditch light brackets and bed stiffeners, Rago Fabrication sliders, ARE camper, 17x9 XDs and 37/12.5/17 stt pros, DT long tubes, xpipe with dual magnaflows, Full skids, TrailToys front and rear bumpers
    TexasTundra27, Jul 4, 2018
    #14
    Black Wolf and 15whtrd like this.
  15. Jul 4, 2018 at 7:02 AM
    #15
    Pale_Horse

    #15
    Pale_Horse Sooooooooo White.

    Joined:
    May 18, 2018
    Member:
    #15430
    Messages:
    286
    Gender:
    Male
    FL
    Vehicle:
    White 2013 TRD OR 4x4 DC
    Cupcake chit.
    Yea man I would say $3000 is worth raising hell about. Lol

    Awesome! I am trying to build my tundra for a Moab trip in the next couple years.
     
    Pale_Horse, Jul 4, 2018
    #15
    Black Wolf, 15whtrd and TexasTundra27[QUOTED][OP] like this.
  16. Jul 4, 2018 at 7:22 AM
    #16
    Black Wolf

    #16
    Black Wolf Chillin' in Alamosa

    Joined:
    Apr 20, 2014
    Member:
    #378
    Messages:
    42,500
    Gender:
    Male
    First Name:
    Matt
    Alamosa, CO
    Vehicle:
    2022 Nissan Frontier SV 4X4
    TuwaPro rack, Z1 Offroad stuff, NISMO suspension stuff, FlowmasterFX Extreme exhaust, AIS, OVS, J&L can, other goodies on the way
    Double...:eek::eek: Raise hell!!!
     
    Black Wolf, Jul 4, 2018
    #16
  17. Jul 4, 2018 at 7:28 AM
    #17
    TexasTundra27

    #17
    TexasTundra27 [OP] Moby Dick

    Joined:
    Feb 27, 2017
    Member:
    #6561
    Messages:
    412
    Gender:
    Male
    First Name:
    Mark
    Texas
    Vehicle:
    2011 Tundra CM 4x4 5.7
    Icon stage 3, Icon billet UCAs, 5.29s, ARB lockers F+R, Coachbuilder +2s and shims, Rago fab ditch light brackets and bed stiffeners, Rago Fabrication sliders, ARE camper, 17x9 XDs and 37/12.5/17 stt pros, DT long tubes, xpipe with dual magnaflows, Full skids, TrailToys front and rear bumpers
    Most of the $3000 is the parts and labor for the timing chain tensioners and guides, but since they’re that far I told them to fix the Cam tower leaks also.
     
    TexasTundra27, Jul 4, 2018
    #17
    Black Wolf[QUOTED] likes this.
  18. Jul 4, 2018 at 7:31 AM
    #18
    Black Wolf

    #18
    Black Wolf Chillin' in Alamosa

    Joined:
    Apr 20, 2014
    Member:
    #378
    Messages:
    42,500
    Gender:
    Male
    First Name:
    Matt
    Alamosa, CO
    Vehicle:
    2022 Nissan Frontier SV 4X4
    TuwaPro rack, Z1 Offroad stuff, NISMO suspension stuff, FlowmasterFX Extreme exhaust, AIS, OVS, J&L can, other goodies on the way
    Makes sense to get it all done at the same time.
     
    Black Wolf, Jul 4, 2018
    #18
    Professional Hand Model likes this.
  19. Jul 4, 2018 at 7:37 AM
    #19
    TexasTundra27

    #19
    TexasTundra27 [OP] Moby Dick

    Joined:
    Feb 27, 2017
    Member:
    #6561
    Messages:
    412
    Gender:
    Male
    First Name:
    Mark
    Texas
    Vehicle:
    2011 Tundra CM 4x4 5.7
    Icon stage 3, Icon billet UCAs, 5.29s, ARB lockers F+R, Coachbuilder +2s and shims, Rago fab ditch light brackets and bed stiffeners, Rago Fabrication sliders, ARE camper, 17x9 XDs and 37/12.5/17 stt pros, DT long tubes, xpipe with dual magnaflows, Full skids, TrailToys front and rear bumpers
    Woooo! Just got the last one out without taking the oil filter housing completely out! Really didn’t want to take it all out. I removed the cap and filter and the bracket on the motor side that goes to the block and it gave me enough space!
     
    TexasTundra27, Jul 4, 2018
    #19
    ColoradoTJ and 831Tun like this.
  20. Jul 4, 2018 at 7:45 AM
    #20
    TexasTundra27

    #20
    TexasTundra27 [OP] Moby Dick

    Joined:
    Feb 27, 2017
    Member:
    #6561
    Messages:
    412
    Gender:
    Male
    First Name:
    Mark
    Texas
    Vehicle:
    2011 Tundra CM 4x4 5.7
    Icon stage 3, Icon billet UCAs, 5.29s, ARB lockers F+R, Coachbuilder +2s and shims, Rago fab ditch light brackets and bed stiffeners, Rago Fabrication sliders, ARE camper, 17x9 XDs and 37/12.5/17 stt pros, DT long tubes, xpipe with dual magnaflows, Full skids, TrailToys front and rear bumpers
    Just a little bad... also I feel like a fiddler crab after swinging a 3lb hammer up that many times

    46CE7E6D-275D-464D-830A-C24D1076B8F1.jpg
     
    TexasTundra27, Jul 4, 2018
    #20
    Coachbuilder1 and 15whtrd like this.
  21. Oct 1, 2018 at 11:37 PM
    #21
    Spvrtan

    #21
    Spvrtan Amateur fabricator

    Joined:
    Apr 2, 2015
    Member:
    #1140
    Messages:
    1,681
    Gender:
    Male
    First Name:
    Kris
    San Diego, CA
    Vehicle:
    Black '14 CM SR5 w/ SC; 40s on 17s; 5.29s
    I'm about to finally do my bushings this week; was using a pickle fork really necessary to get the OEM bushings out? I don't have one on hand and don't feel like ordering one just for this.
     
    Spvrtan, Oct 1, 2018
    #21
  22. Oct 2, 2018 at 3:06 AM
    #22
    TexasTundra27

    #22
    TexasTundra27 [OP] Moby Dick

    Joined:
    Feb 27, 2017
    Member:
    #6561
    Messages:
    412
    Gender:
    Male
    First Name:
    Mark
    Texas
    Vehicle:
    2011 Tundra CM 4x4 5.7
    Icon stage 3, Icon billet UCAs, 5.29s, ARB lockers F+R, Coachbuilder +2s and shims, Rago fab ditch light brackets and bed stiffeners, Rago Fabrication sliders, ARE camper, 17x9 XDs and 37/12.5/17 stt pros, DT long tubes, xpipe with dual magnaflows, Full skids, TrailToys front and rear bumpers
    Yes, I tried with chisels and could only bend the lip down a bit. This is the kit I got off Amazon that bad the correct size, I think it was around $40. Also don’t be stupid like me and make sure you torque everything down correctly.... I was so tired and aggravated I just got it “tight” with my ratchet and called it good, and it was until I was on top of Imogene trail at 13k feet and one bolt got loose. Dumb way to ruin a brand new set of bushings so I had to replace them again :censored:

    09F07BD8-C435-4B50-949D-17EF8CA5CF1C.jpg
     
    TexasTundra27, Oct 2, 2018
    #22
    831Tun and dcsleeper408 like this.
  23. Oct 2, 2018 at 3:14 AM
    #23
    Les7311

    #23
    Les7311 Look up, what do you see

    Joined:
    Dec 30, 2016
    Member:
    #5738
    Messages:
    1,212
    Gender:
    Male
    Vehicle:
    2008 Blue Tundra TRD 4x4
    Any pics of the surgery?
     
    Les7311, Oct 2, 2018
    #23
  24. Oct 2, 2018 at 3:36 AM
    #24
    TexasTundra27

    #24
    TexasTundra27 [OP] Moby Dick

    Joined:
    Feb 27, 2017
    Member:
    #6561
    Messages:
    412
    Gender:
    Male
    First Name:
    Mark
    Texas
    Vehicle:
    2011 Tundra CM 4x4 5.7
    Icon stage 3, Icon billet UCAs, 5.29s, ARB lockers F+R, Coachbuilder +2s and shims, Rago fab ditch light brackets and bed stiffeners, Rago Fabrication sliders, ARE camper, 17x9 XDs and 37/12.5/17 stt pros, DT long tubes, xpipe with dual magnaflows, Full skids, TrailToys front and rear bumpers
    The 3rd pic is the little bracket I removed to get the upper driver side bushing out. Also make a real good mark of how the steering linkage was so you get it back on right, and pay attention to not turn the wheel or you could destroy your clock spring... :anonymous:

    A969DF53-E238-4FDF-979C-7A820EBF04A2.jpg
    EC56EA0E-27B3-498E-9CBA-90E5A89BF7AC.jpg
    D0483485-9824-4B46-A494-A2FB31E54B83.jpg
     
    TexasTundra27, Oct 2, 2018
    #24
    dcsleeper408 likes this.
  25. Oct 2, 2018 at 3:40 AM
    #25
    Les7311

    #25
    Les7311 Look up, what do you see

    Joined:
    Dec 30, 2016
    Member:
    #5738
    Messages:
    1,212
    Gender:
    Male
    Vehicle:
    2008 Blue Tundra TRD 4x4
    Thanks and will try to find mine

    Was there any “triggers/symptoms ” why you had to replace them?
     
    Last edited: Oct 2, 2018
    Les7311, Oct 2, 2018
    #25
  26. Oct 2, 2018 at 3:58 AM
    #26
    TexasTundra27

    #26
    TexasTundra27 [OP] Moby Dick

    Joined:
    Feb 27, 2017
    Member:
    #6561
    Messages:
    412
    Gender:
    Male
    First Name:
    Mark
    Texas
    Vehicle:
    2011 Tundra CM 4x4 5.7
    Icon stage 3, Icon billet UCAs, 5.29s, ARB lockers F+R, Coachbuilder +2s and shims, Rago fab ditch light brackets and bed stiffeners, Rago Fabrication sliders, ARE camper, 17x9 XDs and 37/12.5/17 stt pros, DT long tubes, xpipe with dual magnaflows, Full skids, TrailToys front and rear bumpers
    Had some popping coming from the front end so jacked up the front and shook the tire side to side and whole rack was moving with it
     
    TexasTundra27, Oct 2, 2018
    #26
  27. Oct 2, 2018 at 5:47 AM
    #27
    Atomic City Tundra

    #27
    Atomic City Tundra Cam Tower Leak Addict

    Joined:
    Mar 12, 2018
    Member:
    #13508
    Messages:
    1,749
    Gender:
    Male
    First Name:
    Devin
    New Mexico
    Vehicle:
    2013 Tundra 5.7FFV CM 4X4
    Cam tower seals? I thought that problem didn't exist? (at least according to some people). :stirthepot:

    Sorry that crap happened.
     
    Atomic City Tundra, Oct 2, 2018
    #27
    TexasTundra27[OP] likes this.
  28. Oct 2, 2018 at 6:39 AM
    #28
    TexasTundra27

    #28
    TexasTundra27 [OP] Moby Dick

    Joined:
    Feb 27, 2017
    Member:
    #6561
    Messages:
    412
    Gender:
    Male
    First Name:
    Mark
    Texas
    Vehicle:
    2011 Tundra CM 4x4 5.7
    Icon stage 3, Icon billet UCAs, 5.29s, ARB lockers F+R, Coachbuilder +2s and shims, Rago fab ditch light brackets and bed stiffeners, Rago Fabrication sliders, ARE camper, 17x9 XDs and 37/12.5/17 stt pros, DT long tubes, xpipe with dual magnaflows, Full skids, TrailToys front and rear bumpers
    Sounds like some people should leave the thinking to us with proof :deadhorse:
    Haha, just glad to have it fixed finally!
     
    TexasTundra27, Oct 2, 2018
    #28
    831Tun and Atomic City Tundra[QUOTED] like this.
  29. Oct 3, 2018 at 8:09 PM
    #29
    Spvrtan

    #29
    Spvrtan Amateur fabricator

    Joined:
    Apr 2, 2015
    Member:
    #1140
    Messages:
    1,681
    Gender:
    Male
    First Name:
    Kris
    San Diego, CA
    Vehicle:
    Black '14 CM SR5 w/ SC; 40s on 17s; 5.29s
    Did you have to get an alignment after swapping?
     
    Spvrtan, Oct 3, 2018
    #29
  30. Oct 3, 2018 at 8:12 PM
    #30
    dcsleeper408

    #30
    dcsleeper408 BASTRDS

    Joined:
    Nov 10, 2015
    Member:
    #2081
    Messages:
    4,947
    Gender:
    Male
    First Name:
    mark
    San Jose CA
    Vehicle:
    2015 TRD PRO
    If you dont touch the eccentrics or tie rods you dont need to.
    It doesnt hurt to sweep it on the rack and line it up again if needed. Your tires aint cheap.
     
    dcsleeper408, Oct 3, 2018
    #30
    joonbug and TexasTundra27[OP] like this.
Page 1 of 2
Register FREE to Reply!

Products Discussed in

Astro 78807 5-Piece Pickle Fork Ball Joint Separator Set
$53.98
To Top