4.3 axle question

After 3 weeks with a Tacoma, i had to take a hit and trade it in.
The 2019 trunda is coming with a 4.3 axle. is this standard? if not what other gear set is available?
Thanks in advance
Rudy

 

I think 4.10 is available without the tow package. I believe all crewmax cabs get the 4.30 rear.

Those are the only two ratios available, at least with the 5.7l to my knowledge.

Maybe someone can confirm/deny.

 

Thanks for the reply.

 

Wow what year was the tacoma? I made it a few years but it was misery.

 

Tacoma was a 2018 limited, i got 1300 miles on it..i came from a 2007 trunda. right after we got the truck, we found a e3 camper we wanted (nothing more then a pop with a front deck on it) max's out at 4400 lbs. should not have been a problem. i didn't know the camper has 450lbs of tongue weight unloaded. ..you can add 800 lbs on the deck. camper spec.sheet says a max of 1200 lbs at the tongue.
I setup the camper empty with a Andersen WDH and was pretty happy with the test drive.
We just got back from 10 days in the woods. 2-small outboards, 2-75 quart coolers, chainsaw, tools and about 10 gallon's of gas. i couldn't get the truck level with the WDH. we have a few antique harleys and we will take one with us when we hit the meets.
I should have known better, we had full size trucks for 40 years.