1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

For those with no driver side interior grip handle...

Discussion in '2.5 Gen Tundras (2014-2021)' started by Cubanchem, Mar 25, 2016.

  1. Sep 6, 2018 at 12:18 PM
    #121
    eiraved

    eiraved Plane Whisperer

    Joined:
    Aug 20, 2018
    Member:
    #18369
    Messages:
    57
    Gender:
    Male
    Palmdale, CA
    Vehicle:
    2018 MGM Tundra Crewmax Platinum 4X4
    For those who'd like to know, the Sparks Parts Tundra Grab Handle Kit part number is PKTUNGRAB. It fits all 2007 - 2018 Tundra models and comes with the grab handle, "A" pillar cover and:

    • 1 - 1.5” long ¼”x 20 hex bolt
    • 1 - ¼” flat washer
    • 1 - extruded U-Type nut ¼”x 20
    I'm tired of holding onto the steering wheel and/or side pillar to get in the truck, or sliding my fat bottom across the leather seat and wearing it thin while trying to get out. I'm waiting on my parts to deliver, can't wait to install it!

    PKTUNGRAB.jpg
     
    Last edited: Sep 6, 2018
  2. Sep 6, 2018 at 2:48 PM
    #122
    geno0506

    geno0506 New Member

    Joined:
    May 25, 2016
    Member:
    #3446
    Messages:
    4,722
    Gender:
    Male
    First Name:
    Michael
    Vehicle:
    2017 Tundra 5.7 CM 4x4, S/W, B-6112/5160

    My favorite Mod to date! Well, my AMP Research Power Steps too!
     
    eiraved[QUOTED] likes this.
  3. Sep 6, 2018 at 3:04 PM
    #123
    JMB

    JMB Not new, just a little old.

    Joined:
    Jan 20, 2014
    Member:
    #156
    Messages:
    6,603
    Gender:
    Male
    First Name:
    John
    Chesapeake, VA
    Vehicle:
    2013 Super White Tundra DC
    5100s all around, 295-70-18 Defenders, 1.25 Spidertrax spacers, BD reverse lights, de-badged, interior LEDs, footwell LEDs, reverse LEDs, ARE cap, front receiver hitch for cooler holder, cooler holder/rod rack, backup camera, Kenwood HU, Westin nerf bars, Husky floor liners, folding rear seats, remote battery posts, plastidip grill chrome, Powder coat bumpers.
    @Angelslure this is the thread I was thinking about a few weeks ago
     
  4. Sep 6, 2018 at 4:15 PM
    #124
    Jim LE 1301

    Jim LE 1301 Camaro Lover, SSEM # 11,TTC#179

    Joined:
    Apr 29, 2018
    Member:
    #14884
    Messages:
    27,763
    Gender:
    Male
    First Name:
    Jim
    Hudson Valley, New York
    Vehicle:
    2018 MGM Tundra TRD Sport Double Cab
    Love mine.

    20180722_152755.jpg
     
    aperezsh, eiraved, nk1794 and 2 others like this.
  5. Sep 6, 2018 at 4:38 PM
    #125
    geno0506

    geno0506 New Member

    Joined:
    May 25, 2016
    Member:
    #3446
    Messages:
    4,722
    Gender:
    Male
    First Name:
    Michael
    Vehicle:
    2017 Tundra 5.7 CM 4x4, S/W, B-6112/5160
    This is a nice add to them!

    IMG_1626.jpg
     
    aperezsh, lionix, eiraved and 2 others like this.
  6. Sep 7, 2018 at 8:53 AM
    #126
    geno0506

    geno0506 New Member

    Joined:
    May 25, 2016
    Member:
    #3446
    Messages:
    4,722
    Gender:
    Male
    First Name:
    Michael
    Vehicle:
    2017 Tundra 5.7 CM 4x4, S/W, B-6112/5160

    Good Job, :cheers:
     
    NewImprovedRon likes this.
  7. Sep 8, 2018 at 5:05 AM
    #127
    BaLLZaCH

    BaLLZaCH New Member

    Joined:
    May 23, 2018
    Member:
    #15566
    Messages:
    36
    It is funny to me, that my post directly above yours, suggested M6x1 and explained why I didn't use 1/4 x 20 .. I even contacted Sparks Parts about it but they didn't care.
    I'll just have to leave this one alone.

    I love my handle, it made all the difference.

    Enjoy it, and take care.

    (And for God's sake eiraved, order $2 worth of m6x1 hardware and take that 1/4" crap out of your truck! )

    ..
     
  8. Sep 8, 2018 at 6:19 AM
    #128
    Blueknights75

    Blueknights75 040 IS THE FASTEST

    Joined:
    May 13, 2018
    Member:
    #15276
    Messages:
    4,431
    Gender:
    Male
    First Name:
    Ron
    Clayton, NC
    Vehicle:
    18’ TRD CM leveled with 295/70 Ridge Grapplers
    Planning this mod as well...thank you Tundras.com!! :spending:
     
    geno0506 and nk1794 like this.
  9. Sep 8, 2018 at 3:40 PM
    #129
    eiraved

    eiraved Plane Whisperer

    Joined:
    Aug 20, 2018
    Member:
    #18369
    Messages:
    57
    Gender:
    Male
    Palmdale, CA
    Vehicle:
    2018 MGM Tundra Crewmax Platinum 4X4
    Believe me, my post wasn't placed there intentionally. I was looking into getting the handle and came across a kit part number which wasn't noted previously in TundraDad's post or anywhere else on this thread. My interest was solely in sharing this info with others and not placed to belittle your post, although it does appear that way LOL!

    You may (or may not) believe this, but my plan was always to make sure there was plenty of clearance for any possible air bag deployment. Last thing I need is for my addition to become a safety issue! The hardware definitely won't be installed if clearance becomes a concern.
    I do love my Toyota, but at the end of the day SAE hardware works just as good as metric hardware strengthwise for a grab handle!
    :benchpress:
     
    Last edited: Sep 8, 2018
    geno0506 likes this.
  10. Sep 8, 2018 at 3:49 PM
    #130
    Hondoman

    Hondoman New Member

    Joined:
    Mar 12, 2018
    Member:
    #13519
    Messages:
    1,460
    Gender:
    Male
    First Name:
    Jeff
    Dfw Texas
    Vehicle:
    2015 SR5 CM 4x4
    Installed mine this morning. Longest part was going to home depot for a bolt and u-nut.
    20180908_071151.jpg
     
    geno0506 likes this.
  11. Sep 8, 2018 at 4:00 PM
    #131
    Tierhog

    Tierhog SIG-AHOLIC

    Joined:
    Feb 7, 2018
    Member:
    #12731
    Messages:
    1,200
    Gender:
    Male
    First Name:
    Steve
    Florida
    Vehicle:
    2016 Tundra Crewmax Limited 4WD
    Mostly stock/TRD accessories/Morimoto XBs
    Mine arrives Tuesday from Sparks Toyota AND it better have all the bolts lol
     
    eiraved likes this.
  12. Sep 8, 2018 at 4:45 PM
    #132
    geno0506

    geno0506 New Member

    Joined:
    May 25, 2016
    Member:
    #3446
    Messages:
    4,722
    Gender:
    Male
    First Name:
    Michael
    Vehicle:
    2017 Tundra 5.7 CM 4x4, S/W, B-6112/5160
     
  13. Sep 8, 2018 at 9:31 PM
    #133
    BaLLZaCH

    BaLLZaCH New Member

    Joined:
    May 23, 2018
    Member:
    #15566
    Messages:
    36
    Well,,, you got me on that one!!!

    ( Except, it actually starts working at the beginning of the day, and doesn't wait until the end )...

    Here is a picture of m6x1 vs. what Sparks Parts sent in the "kit" (SAE 1/4"x20). You can see that the u-nut is ridiculously wide, and the bolt is beyond long ,,, which in my case, was a problem concerning the airbag.

    (The picture doesn't do justice of how huge this actually is compared to the Fastenall m6x1)

    Just my opinion...

    Thanks for the fun times, I laughed my @$$ off about your reply. Later bro.

    [Edit- I can see it now, somebody is going to JB weld a nut on the back side and it be all the rage ..haha]...

    IMAG1590.jpg
     
    Last edited: Sep 8, 2018
  14. Sep 9, 2018 at 8:16 AM
    #134
    Tierhog

    Tierhog SIG-AHOLIC

    Joined:
    Feb 7, 2018
    Member:
    #12731
    Messages:
    1,200
    Gender:
    Male
    First Name:
    Steve
    Florida
    Vehicle:
    2016 Tundra Crewmax Limited 4WD
    Mostly stock/TRD accessories/Morimoto XBs
    :lalala:Well now I’m licking my chops in anticipation...Mine arrives Tuesday, from Sparks. The kit, I might add.
     
    geno0506 likes this.
  15. Sep 9, 2018 at 11:53 AM
    #135
    eiraved

    eiraved Plane Whisperer

    Joined:
    Aug 20, 2018
    Member:
    #18369
    Messages:
    57
    Gender:
    Male
    Palmdale, CA
    Vehicle:
    2018 MGM Tundra Crewmax Platinum 4X4
    Nice pictures, what kind of camera are you using? No worries tho, I'd rather hear your opinion as you may have caught something I missed.
    It appears the SAE u-nut is about 1/8" longer than the metric, which may or may not be a big deal in this application. I'll definitely follow up on that and post it on this thread. The bolt on the other hand isn't a problem, as that can easily be trimmed down to match the metric bolt's length or to the most convenient length for this application.

    Enjoy your new Tundra bro, I recently bought mine as well and look forward to seeing what else I can do to it!
     
    BaLLZaCH[QUOTED] likes this.
  16. Sep 9, 2018 at 12:57 PM
    #136
    BaLLZaCH

    BaLLZaCH New Member

    Joined:
    May 23, 2018
    Member:
    #15566
    Messages:
    36
    Well, nut is probably 3/16th+ longer but it was midnight and the tape measure wouldn't lay right...

    (...and that was my 5 year old HTC phone taking the picture. I think it is the clearest picture it has ever taken .. its only a 3 or 4 MP ,,, lmfao. !!!)

    Side note, off topic: I wanted your grille. Mine is a 16' and I couldn't find any 18' grilles earlier this year so I went with the TOYOTA Pro one which came out OK, but I still like the honeycomb though.
     
    eiraved[QUOTED] likes this.
  17. Sep 10, 2018 at 10:12 AM
    #137
    DallasTundra

    DallasTundra New Member

    Joined:
    Mar 12, 2015
    Member:
    #1069
    Messages:
    144
    Gender:
    Male
    Vehicle:
    2014 Tundra CrewMax SR5 4X4 5.7L Silver Sky
    2" MotoFab leveling Kit, 2Crave NX-5 wheels(5X150 +15 offset to fill in fender flares space), 275/60R20XL Nitto Terra Grappler G2 Tires, VLEDs Triton V3 Switchbacks, TRS Morimoto XB LED Fog Lights, CCI Chrome Grille, 2019 LED Headlights, Extang Solid Fold, Texas Edition, Leather, Nav, JBL, OEM Flares, Husky WeatherBeaters.
    Sparks came out to $172 shipped to Dallas. Is Roman’s better priced?
     
  18. Sep 10, 2018 at 10:39 AM
    #138
    eiraved

    eiraved Plane Whisperer

    Joined:
    Aug 20, 2018
    Member:
    #18369
    Messages:
    57
    Gender:
    Male
    Palmdale, CA
    Vehicle:
    2018 MGM Tundra Crewmax Platinum 4X4
    Wow, mine was shipped a little further...to CA for $170.
     
    Tierhog likes this.
  19. Sep 10, 2018 at 10:49 AM
    #139
    Tierhog

    Tierhog SIG-AHOLIC

    Joined:
    Feb 7, 2018
    Member:
    #12731
    Messages:
    1,200
    Gender:
    Male
    First Name:
    Steve
    Florida
    Vehicle:
    2016 Tundra Crewmax Limited 4WD
    Mostly stock/TRD accessories/Morimoto XBs
    Likely the FEDX rate isn't adjusted much for the extra 1200 miles... UPS would have had a better rate. Haven't been impressed with FEDX as of late.

    Received and installed. Easy 15m job.

    8D4F044D-5A31-4AE3-818A-C8E70AEBBD15.jpg
     
    Last edited: Sep 11, 2018
  20. Sep 13, 2018 at 6:27 PM
    #140
    eiraved

    eiraved Plane Whisperer

    Joined:
    Aug 20, 2018
    Member:
    #18369
    Messages:
    57
    Gender:
    Male
    Palmdale, CA
    Vehicle:
    2018 MGM Tundra Crewmax Platinum 4X4
    I finally received my driver's side handle and it was installed in 20 minutes, only because I wanted to take some pictures. I found out from a previous post that the airbag deploys rearwards to protect the driver's head by covering the driver's side window. Because the additional hardware used for the handle is forward of the airbag, it will not interfere with a rearward airbag deployment. But, to err on the side of safety, I did apply a piece of foam between the clipnut and airbag in case of airbag deployment as it was about 1/8" away from the airbag.

    IMG_8782.jpg

    IMG_8784.jpg
     
    NewImprovedRon likes this.
  21. Oct 16, 2018 at 2:19 PM
    #141
    Trakker

    Trakker New Member

    Joined:
    Aug 8, 2018
    Member:
    #17918
    Messages:
    3
    Gender:
    Male
    First Name:
    Anthony
    Vehicle:
    2018 MGM SR5 Tundra 4x4 TSS
    BAK Revolver X4, Grab Handle
    Went this route, fast and easy install!
    M6-1 x 30mm (Home Depot)
    6MM Flat Washer (Home Depot)
    M6-1 U-nut (AutoZone)
     
  22. Oct 16, 2018 at 4:38 PM
    #142
    saybng

    saybng Just a member.

    Joined:
    Dec 13, 2015
    Member:
    #2243
    Messages:
    2,890
    Gender:
    Male
    First Name:
    Gary
    Ventura CA
    Vehicle:
    16 Tundra 1794 CM in BLACK!
    Method Nv's, falken wildpeak 275.65.20 Dirty deeds exhaust, 5100's all around...nothin fancy.
    Is there a video on this?
     
  23. Oct 16, 2018 at 5:55 PM
    #143
    eiraved

    eiraved Plane Whisperer

    Joined:
    Aug 20, 2018
    Member:
    #18369
    Messages:
    57
    Gender:
    Male
    Palmdale, CA
    Vehicle:
    2018 MGM Tundra Crewmax Platinum 4X4
    Look at post #123 for your answer.
     
    saybng[QUOTED] likes this.
  24. Oct 24, 2018 at 3:50 PM
    #144
    mmmdowning

    mmmdowning New Member

    Joined:
    Oct 23, 2018
    Member:
    #20890
    Messages:
    2
    Gender:
    Male
    First Name:
    Marty
    Virginia
    Vehicle:
    2019 Tundra 1794 white
    Bed cover, window vents, weather tech floor mats. Deer whistle's.
    Has anyone tried this on a 2019? I just bought the 2019 1794 white crew max last week and would love to do this mod.

    Marty
     
  25. Oct 24, 2018 at 4:05 PM
    #145
    TRD-tv

    TRD-tv Menace2Ohio

    Joined:
    Aug 29, 2018
    Member:
    #18768
    Messages:
    893
    Gender:
    Male
    Cleveland OH
    Vehicle:
    2012 MGM Tundra TRD
    i have a '12 i feel like the handle is more on the inside closer to the windshield rather then on the front part near your face like you see in OPs post. still dont think it would matter. where would you mount it then? does it fit in the stock tundra spot.

    my chevy had a bad airbag sensor (because its a chevy) and they didnt go off when i totaled my truck. i prefered it that way lol (jk safety is important)
     
  26. Oct 24, 2018 at 4:06 PM
    #146
    DallasTundra

    DallasTundra New Member

    Joined:
    Mar 12, 2015
    Member:
    #1069
    Messages:
    144
    Gender:
    Male
    Vehicle:
    2014 Tundra CrewMax SR5 4X4 5.7L Silver Sky
    2" MotoFab leveling Kit, 2Crave NX-5 wheels(5X150 +15 offset to fill in fender flares space), 275/60R20XL Nitto Terra Grappler G2 Tires, VLEDs Triton V3 Switchbacks, TRS Morimoto XB LED Fog Lights, CCI Chrome Grille, 2019 LED Headlights, Extang Solid Fold, Texas Edition, Leather, Nav, JBL, OEM Flares, Husky WeatherBeaters.
    TRD-tv likes this.
  27. Oct 24, 2018 at 4:08 PM
    #147
    TRD-tv

    TRD-tv Menace2Ohio

    Joined:
    Aug 29, 2018
    Member:
    #18768
    Messages:
    893
    Gender:
    Male
    Cleveland OH
    Vehicle:
    2012 MGM Tundra TRD
    in other news, my aftermarket radio has a clock.
    - Would the FJ gauge pod look stock-ish in a 2nd gen tundra?

    i wonder
     
  28. Oct 24, 2018 at 4:45 PM
    #148
    mmmdowning

    mmmdowning New Member

    Joined:
    Oct 23, 2018
    Member:
    #20890
    Messages:
    2
    Gender:
    Male
    First Name:
    Marty
    Virginia
    Vehicle:
    2019 Tundra 1794 white
    Bed cover, window vents, weather tech floor mats. Deer whistle's.
  29. Oct 24, 2018 at 7:15 PM
    #149
    DallasTundra

    DallasTundra New Member

    Joined:
    Mar 12, 2015
    Member:
    #1069
    Messages:
    144
    Gender:
    Male
    Vehicle:
    2014 Tundra CrewMax SR5 4X4 5.7L Silver Sky
    2" MotoFab leveling Kit, 2Crave NX-5 wheels(5X150 +15 offset to fill in fender flares space), 275/60R20XL Nitto Terra Grappler G2 Tires, VLEDs Triton V3 Switchbacks, TRS Morimoto XB LED Fog Lights, CCI Chrome Grille, 2019 LED Headlights, Extang Solid Fold, Texas Edition, Leather, Nav, JBL, OEM Flares, Husky WeatherBeaters.
    You’re welcome, good luck on the install.
     
  30. Oct 24, 2018 at 9:04 PM
    #150
    Pudge

    Pudge Super Secret Elite Member #7

    Joined:
    Nov 8, 2016
    Member:
    #5136
    Messages:
    9,498
    Gender:
    Male
    First Name:
    Sean
    CT
    Vehicle:
    2015 Blue Ribbon Platinum
    TRD PRO grille, OCD consol organizers, DIY wireless phone charger, 33" Michelin Defender LTX MS, Bak revolver X2 tonneau, weathertech liners, 20% tints. DIY pop n lock, 2018 LED headlights, morimoto fogs, TRD shift knob, DirtyDeeds 8"BAM exhaust, kenwood HU,JL amp, Tech12volts Tundra full speaker upgrade w/sub, Swing case, and lots of fluid film
    I really wanna do this. Anyone have luck getting one at a junk yard? Junk yards are few and far between around here, not like they are in Texas or out west. If anyone can find a deal on one (or two :wink:) of these when your are looking, I'd gladly pay you for your time and shipping for one.
     

Products Discussed in

To Top