FS: 2 factory TRD wheels and tires - $150 each(+shipping)

For sale - Factory TRD wheels and factory tires. Only 10,000 miles on the set. Includes factory lugs and center caps, NO TPMS or stems. Tires are currently not inflated.

Update: Not a lot of interest in the wheels and tires as a set so selling these as singles. Two wheels and tires have been spoken for but there are 2 remaining.

$150 per single wheel and tire set - local pickup available (Cedar Rapids, IA). Also willing to meet within ~50 miles of CR. Will ship at the buyer’s expense. Can get custom shipping quotes as needed but so far it’s been about $100 per wheel and tire for shipping.

Thanks!

 

GLWS

 

Very tempting living in your area and all. What did you replace it with?

 

Nitto Ridge Grapplers and some Method wheels. Nothing wrong with the stock wheels and tires, just wanted a different look

 

I would love those wheels. I be down in Tiffin. Don’t have that on the radar at this point.

 

CR as well. Like the new tire and rim set up.

 

Thanks, I’m a big fan as well. The new wheels and tires coupled with the Toytec level kit, really gave me the stance I was after. Not too high of a lift and it gets rid of the stock rake.

 

Great deals always so far from Houston. Nice new wheels

 

Thanks! And funny, I usually say the same thing about Iowa. A lot of the deals I see are always west coast or CO. Maybe I should just move

 

If you get a wild hair and want to ship just the wheels let me know

 

My issue is I only want one for a spare or I would.

 

I’d like to try and move them as a whole set but if the interest isn’t there, I may consider parting them out as singles.

 

What size tire did you go with? Any rubbing?

 

295/70R18 Had to remove the mud flaps and trim some of the plastic in the fender well to get clearance. On rare occasions I’ll get some rub at full wheel lock, but otherwise no issues at all.

Here’s a few pics of what had to be trimmed in the front fender wells. Hope this helps.

 

curious why you went with Toytec and not one of the other brands? just bought a Tundra and looking to level it out.

 

Honestly, just by doing a lot of research on here before making the purchase. The Toytec setup came highly recommended and a lot of other members have run the same setup with great success.

Also, their customer service is some of the best around. I reached out with several questions on what setup I should get and explained my typical usage (little to no towing and no off-roading) and they were able to recommend the best setup for me. They could’ve easily sold me on the $1800 system, which I was originally thinking of, but they said I really only needed the spacer kit which was a fraction of the cost. In my experiences, most companies try to oversell customers so it was refreshing to know they only sold me what I needed.

If you have any questions about any of their products, I’d highly recommend reaching out to them. They are very knowledgeable and will definitely help you find the setup right for your needs.

 

Is that all you have are spacers in the front? Nothing else?? Truck looks great!

 

Thanks! It definitley turns heads going down the road. Especially when I pass trucks from the “big 3”.

Regarding the level kit, there’s spacers up front and blocks in the back as well. After discussing my driving style and goals for the truck with Toytec, this is the kit I purchased:

 

GLWS!

 

Cant believe these havent sold.

 

GLWS

 

Any chance of you knowing the cost of shipping? 33028 area code

 

PM Sent

 

What did you use to do the trimming? And did you do the trimming while the fender liner was on the truck?

Thanks

 

My brother is a mechanic so we did the work at the dealership he works at. He used a die grinder to trim the plastic and we found it best to do the trimming while the liners and wheels were still on the truck. This allowed us to cut away pieces, turn the wheels to full lock to test for any interference, and cut away more as needed.

 

Someone jump on these! Cheapest set I’ve found.

 

Any idea what shipping would be to CT? I probably could have them shipped to a business, that’s usually cheaper then residential freight delivery. 06037 is the zip code. Let me know! Thanks

 

PM sent

 

I have a set of TSS wheels in Bloomfield. 20inch I can dig out if interested

 

Do they have tires too? I was looking to put these on a land cruiser so I’m not sure these would work but if you want to shoot me some pics I can see