Trailer axle and hubs to match 2015 Tundra

I'm building an offroad trailer and want to use the same size and lug pattern wheels (and tires) on the trailer as are on my truck. Just called a local trailer shop and was told that it is impossible to get trailer hubs that will fit the bolt pattern of my 2015 Tundra. Anyone have any suggestions or ideas?

 

Depending on how heavy you will load the trailer, wouldn't wheel adapters/spacers work? You may not want the extra width from the adapters when offroading.

 

I think that's the route I'm going to have to go. I spoke to a sales guy at Timbren and I think using one of their axle-less suspension systems with a spacer will give me something close to the width I'm looking for. I'll be using 3500lb Timbren system, but suspect the wheels/hubs/spacers/suspension will never see anything more than 2000lb.

 

Let us know how it turns out, I've love to see your trailer build once it's finished

 

I just bought a Smitty Scout trailer, too many projects currently to start a trailer build. I bought some 1" adapters 5x5 to 5x150 on ebay for about $90. There were several choices but I shied away from the ones that had 5x5 and 5.5x5 to 5x150 'cause they seem like they'd be a lot weaker.

 

Will do. I’ll likely make a build thread to document it.