Official Tundra Wheel and Tire Setups - Pics and Info

Rocky,

Are you happy with that size? Is the bumper/gender gap noticeable? Would a 34 make a difference?

Thank you and sorry for being such a newbie.

 

Not gonna lie, that shit made me chuckle! I love the size. No noticable gender gap here. Ha!

 

Hahaha. Whoopsie! Fender - gender no biggie! You're running 20" wheels?

 

18x9

 

Good so far bro.. no issues and about 9k miles on them now.. on street driving tho ¯\_(ツ)_/¯

 

Figure I'd add this to the official thread. Enkei ST6 wheels 18-8.5 +30 5.91 bckspacing, replaced from Double Standards), 285/70/18 Ridge Grapplers.

I'm pretty happy with the "poke" as it seems to not be kickin rocks.


I'm sure they will be effortlesss to clean up now. The fake beadloack was always packed with sand and rocks.

 

Very nice 17Inferno, looks great. I hope you don't mind me copying you but these wheels may be what I've been looking for. Been trying to find something that is very close to the stock alloy wheel dimensions, no fake beadlock and in gunmetal finish. Trying to avoid any chance of rubbing on my non-lifted Tundra. Would you let me know where you got them so I can check them out? Thanks.

 

I got mine from Tirerack.com. Come w/ free Gorilla lugs also. I'm quite pleased with them!

 

Anyone know the offset for OEM Off Road wheels?

 

Wheels are 17x8.5 0 offset method grid. Tires are 295/70/17 Yokohama geolandar g003. Stock height, nfab mrds bumper, so far no rubbing anywhere.

 

Love that 280, I had a 78, 2+2

 

It's actually a 76 celica

 

Cool, I actually see that now. My first car was a 77 Celica GT, hatchback. Got it in 1982.

 

Ok guys, I have read this forum almost 3 times and have read so many different answers I don’t know what to think. Rough country 3.5” lift, with 20x9 wheels with +20mm offset. Will 35”x12.50x20 clear the body mount? I know I would have to remove the front mud flap and trim but don t want to cut into body mount. As one member said “ I only want to do this once” lol

 

Think I've decided on the Wildpeaks A/T3W's in 305/65/18. Read thru entire post 3 times and cannot see where anybody ran this size with 5100's on highest setting, but I think they will clear with +20 rims. What do you guys think on needing the CMC? Wait and find out or definitely gonna need it? Would rather have 285/70's but don't see many snow rated tires in that size that I like.

Thanks.

 

Lift?

 

So 3inch lift total?

 

No lift, I'm still on stock sr5 suspension.

 

Hmm wonder if my 295/70R18 nitro trail would fit then

 

I’d be surprised.

 

Your tires are taller than mine. Will also have to take into consideration the width and offset of the wheels.

 

A pic to show gap between wheel and fender:

This pic shows gap between wheel and cab mount at full lock:

 

Yeah I think I should just go with a 3/1 lift to be safe.

 

Don’t know unless u try right lol

 

i think since you have a after market bumper u dont have issues on stock suspension.

 

True. Also need to add that I've removed the front rear mudflaps. I've tried to put them back on but they rub at full lock.

 

Just from my experience today, 35x12.50x20 with +20mm offset on 20x9 wheels with a 3.5” lift won’t clear the body mount. ... waiting on another set of tires

 

Hello all, I want to get bigger tires for my truck, 06 Tundra DC with 20" Enkei wheels, I'm looking at 285/55/R20 (32.3/11.2/20) and was wondering if I would have clearance on stock suspension (for now) I haven't read anything about 1st gens and the enkei wheels here and the search function did not produce any answers for me. The stock size tire on it now is 295/45/20 (30.5/11.6/20) so the height would be 1.8" taller but .4" slimmer.

 

Toyo open country m/t 3" leveling lift
305 55 R20
Fuel Vandals 0 offset