Bolt in On Board Air Compressor Mount

UPDATED ORIGINAL POST 4/11/20

Ive made an Aluminum bracket for the 2.5 gen Tundras to mount an ARB Compressor safely and securely into the engine bay.
This will also bolt directly into the 2nd gen Tundras. Now minor adjustments needed in order to fit the twin compressor in the 2nd gen. The single ARB will fit with no issues. In order to fit the twin compressor in a 2nd gen all you need is to install a 3rd gen factory airbox. The 2nd gen factory airbox is too large to allow room for the twin.

Each mount is Waterjet cut to precision so they all fit perfect into the mounting location.

This mount will fit both the

$338 CKMA12 On-Board Air Compressor High Performance 12 Volt for Air Locker Differentials and Tire Inflation

CKMA12 single compressor along with the

$750 CKMTA12 ARB 12 Volt Twin Air Compressor and Tire Inflation Kit with Digital Tire Inflator - High Performance 4X4

CKMTA12 Twin compressor right under the hood next to the factory airbox. Mounting the bracket uses all the existing hardware already in the vehicle so it’s nice and easy.

Price drop on new order!!
NEW PRICE TOTAL- $125

Please PM me to order or for any further questions. Also feel free to message me on Instagram for info as well
Instagram: @tundra452
Thank you for your business and supporting #BannockBuilt

 

Nice setup Brandon!
Gotta upgrade my bike pump setup soon.

 

I like the pump. But is the cover underneath still accessible ?

 

Is that pump capable to run an air horn?

Need something that will get them friggers when they lane violate

 

While the compressor is bolted in you will not be able to get into the box underneath. Not even sure what is inside the box but it’s very easy to remove the 3 bolts and slide the compressor out of the way if needed to access the box.

 

I’ve never dealt with air horns so I’m not sure but pretty sure this little compressor can do a lot of things. Think you just need to add an air tank and you can get some good cfm to blow those horns!
http://store.arbusa.com/ARB-On-Board-High-Performance-12-Volt-Air-Compressor-CKMA12-P3572C9.aspx

 

Nice setup. I think I've seen something similar.

 

very nice. I like it.

 

Nice work. I'm sure a few guys here would love to have one of these mounting brackets, there may also be a market for a bracket that would hold a small tank under the hood as well

 

Thanks for getting my mount out on Friday can’t wait to install mine.

 

Received mine yesterday and had it powder coated today, looks great.

 

think this may be the way to go to mount a relay panel in the engine compartment. nice and clean and level. looks professional.

 

Very nice! Looks great in Black! Might have to paint mine now

 

Do you ship to Guam? This will fit in the engine bay of an 08 right?

 

I love Gaum! Spent a month there years ago working. Love the Tower of London bar. Beer and off duty strippers. Great place

 

I don’t see why I can not ship to Guam right. But I have not done any fittment for the 2nd gen Tundras. So not sure if the 08 is still the same or not. Maybe you can send me a photo of that same location in your 08. If it looks the same it might be the same measurements.

 

Pretty nice. I might have to drive up to you and buy one off your hands. I'm just ~30 minutes from VC. I currently have my locker compressor just bolted to the cover of that fuse box.

 

Sounds good Kris! I work in San Marcos so we can always meet up in Escondido or somewhere around there if you would like.

Also I will be bringing a few extra mounts with me to Tundras to Sedona that I can sell at a discounted price!

 

Finally got the added twin mount cut out and test fit! Seems to be very sturdy. It’s not final yet but this design should work as far as my measurements look. Still have not tested an actual twin compressor. (Just took some measurements from one at the local 4wheelparts) I plan to draw this up on autocad and as soon as that’s done I can get multiple cut out!

 

Well when it's ready, I'm down for one!!!

 

Dirk! Sorry for the delay man but from the looks of the photo the single mount should be a perfect fit! I looked at a friends 08 and he had a K&N intake system and it was real tight but still fit. Let me know if your interested! PM an address or place to ship and I can send one your way!

 

You coming down to SD from VC anytime soon? I still would love to buy one of these. I currently have my air locker compressor in that area but bolted to the top of the fuse box lid.

 

I still think that’s pretty crazy your compressor stays in there on that plastic lid! But not sure when I will be downtown SD next but it’s only like 30 mins from my work. I can always meet up with you. Or looks like shipping will be about $7.25 i can get one shipped now! Just PM me your address or let me know when you want to meet up! Also would love to check out Pluto!

 

Any chance you could make a mount for the ARB 1 Gallon tank to fit a 3rd gen in this spot? (I've attached install instructions for tank that has bolt pattern details).

http://62.26.13.244/catalog/einbauanleitung/2-171601.pdf

 

Count me in for one of these.

Can you make a provision for an arb manifold with a twin compressor? I run lockers and air up tires off the manifold that is fed by the compressor.

 

Finally got around to installing this bracket and moving the compressor out of the driver side frame rail. I really wish that I never put it there.

 

Hey guys sorry I’ve been MIA. Busy doing life. But I have done some further fitment and testing with the Twin compressor mount. Thank you for being patient with my slow progress. The mount is currently bolted into my truck and looks great!


So once I had the holes drilled and countersunk I went to the local 4wheelparts and the guy was nice to let me set the Twin onto my mount. That being said it was TIGHT! It sit all the way down but was basically rubbing on the back firewall and really close to the air box. So not having a compressor to take home and mount correctly I am still unsure about final assembly for this current prototype. I also plan to make an additional bend to be able to mount the ARB manifold. I learned that the manifold mounts separate on this twin.


So at this time I don’t feel comfortable sending out any mounts until I can figure out a way to make some more room! If anyone is local to So Cal and wants to loan me there Twin for testing I’d give ya a sweet deal on the mount. Until then I’ll try to keep this thread updated with more progress.

 

Hey Steven!
Did you want to only mount that ARB tank in the mount location? Do you have your compressor in a different location? But yea if you just want the tank mounted I’m sure I can make you a blank “Twin” style mount and you or myself can just drill holes to mount that tank. Although I’m not sure how much room is need with for that tank. That’s a great idea though.

 

Luis! Just updated some photos of the twin mount. Also in there I plan to add a bend where the manifold would be able to be mounted next to the compressor.