NorCal spotted and BS Thread

Take Warren with you when you do your pedicure on Saturday and he can play kickball on Sunday. I doubt those toenails can grow back in one day.

 

dont worry about our toes.. Just be sure to bring that back brace.. I'll bring my gramps walker.. Still got the tennis balls mounted on the feet.. Just to help ya out after I whooop that ass.

 

You keep talking about working... but you keep coming back.

 

bc i am not giving u the last punch... i cant reply 2hrs later with a punch line.. doesnt make sense

 

going back to work now.... we'll finish this later
JcreeP got me on the updates.. @froggy78

 

Is Kadaw like sexual favors in tagalog?

 

I ran dust light wire between inner and outer bed skins. It's super easy to fish the wires through there. Then they're zip tied, from the pass side to driver, to the bottom of the bed. The wires enter under the truck into the door sill then pass through the OEM fire wall boot into the engine bay.

The Blue Sea is WAYYY cheaper. I've got about $100 into this and that includes the switch panel, fuse box, ground bus, relays, wire and wire loom. I just can't spend $500 on a switch pro that has $35 worth of electronics in it.

 

Do you have the correct message board?

 

wrong thread...

 

lol cmon warren. Give switch pro a little more credit than $35!
I mean yes you can build a blue sea to be cheaper. Yes it does the job.
If you build a blue sea for 8 accessories including good relays with nice switches. can cost you to an upwards about $250.If you cheap out on some switches and relays im sure you can save a lot more.. At $250 it's better price than SP system. Now I am not backing up SP just bc I have it, I do kinda regret the money could've been spent else where, but it makes it that much easier for me to add accessories.

The technology and accessibility is really what you pay for in the switch pro.. To name a few of many that it has are the bluetooth capability, auto kill, programing switch for strobe/flash/power ignition or battery options. do we need all these? probably not. Cool to have- Maybe the more hardcore guys will have better use with it.

 

No, Warren is saying he can't spend $500 on SP for $35 worth of lights he's putting on.

 

opps sorry warren! I missed that.
well anyways.... @16tunterd is completely right then. If you add more accessories it probably be more worth it, but then again a Blue sea or even spod system is cheaper.

 

But it won't be $35 when Warren adds 2 sets of ditch lights, a lightbar, compressor, winch, and locker.

 

With all that a sp system would be perfect. Clean everything up and have a nice system easy to add and remove acc.

 

Sorry Mark, (@dcsleeper408 ) not trying to offend you. I just heard something about the cost of the electronics in an Iphone and it was under $30.


So, I've got:
1. Light bar
2. Ditch lights
3. Chase lights
4. Reverse lights
5. Bed lights
6. ARB compressor

Pretty sure my 2 sets of BD sports cost less than a SP. The Blue Sea is also very familiar to me having wired a couple of boats using the same stuf and no electronics to cause problems.

 

Oh, ok... so you were talking about $35 worth of electronics in the SP.

 

Have you gotten any chase lights yet?

 

lol no worries brotha it was me who missed the keywords! still good info for joon to take in from both ends.
did you ever figure out the new switch system? I've been lurking on boardudes thread to see an update hoping you would've updated me by now.

 

don't you go off and change the subject...

 

Yeah, I just need to add a switch to turn on the switches. It'll act as a Kill switch too.

 

Just saying this is from switch pro

I’m sure Chinese parts.. assembled here..

Gender switch pro..

 

still trying to decide whether to get some Squadrons and put in front and take the ragos back or just get some cheapos for the rear. I want to just do the squadrons but then I'd have to rewire the front again. I don't even like installing stuff the first time, but I really hate redoing stuff a second time.

 

cut and splice the posi and negatie from the sideshooter harness.

 

I'm gonna need that harness to go to the rear. I would want my nice squadrons to have the nice harnesses. Even though they're probably the same exact quality.

 

I've got some lights you can have for chase lights. Same cheepos you posted earlier.
All you have to do it wire in the connectors in front, not rewire everything.

 

I wasn't super impressed with the harness it's still aluminum wire and not copper.

 

lol. well be about it. Order your Bajas.. it's either baja or bwaha..
warren has chase lights and fogs for ya... got some great lighting right there.

 

Sports or Pros???

 

sProts best of both worlds.