FS: 2018 Tundra LED Headlights Plug N Play wire Harness for 2014-2017 models

Can I be added to the list? 17' Tundra SR5 Thank you

 

What is the approximate wait time for the harnesses once they are ordered?

 

For trucks with Amber DRL wait time is 1 week, for platinum/1794 right now no waiting time I have 4 sets ready to ship.


Thank you for contact me, let me know if you are interested.

 

Sub’d

 

Guys with the TRD Pro's, I'm interested in your pro headlights. If any of y'all are going to sell them.

 

Ready to buy one of the Platinum kits. Let me know your PayPal

 

Looking at installing tomorrow morning. Top notch harness for sale here! Thanks @iHacker and @Roman for everything. I'll post up photos when complete.

 

SAWEEET! rocky_mtn_trd. just got my lights on Wednesday and my boxes look to be the same shape yours are in! Hope no damage!

 

Im stoked also, got my headlights lights a couple scratches on the drivers headlights but nothing serious,
Cant wait to install them next week, thanks again @iHacker and thanks @Roman

 

Let us know how it went and if any issues you come around with ( hopefully none ). If i dont have to work this weekend i would be installing it asap. Please post lots of pics, Thanks.

 

Oops I been lucky then when received my headlights boxed looked torn and one of them had a big hole in one side but fortunately headlights arrived intact.

 

My was in great shape, it was just a minor scratches or cut from a blade, as long as the light works im all good, geez i just might have to call in sick i dont think ill be able to wait till next weekend.

 

I have a 2015 SR5. Can I buy a harness too please.

 

Ordered my headlights on Monday and received on Friday. Hoping to get this harness soon. This is like a kid waiting for Christmas morning.

 

I didn't cut the gray wire for my drl's, I bought a different module that doesn't have drls (I think it's from a sequoia). Your harness still works as intended if I order one right?

 

PMed

 

Got it all done, but I can't button it all up and post photos yet. I have LED DRL's that dim when the headlamps are activated, but I have zero headlights high beam or low beam and zero blinkers. I checked the fuse on @iHacker harness and the fuse on the motocontrol and they test good. Any ideas would be much appreciated as it's about to get dark and cold in about an hour and a half. Thanks guys.

Edit, I do have headlamps, high beam and low beam, I just have no turn signals and no amber running lights. I didn't cut the gray wire inside, I just tied the black wire from the relay into the gray wire instead in hopes to keep the amber DRL's.

 

Did you swap the pins on your turn signals?

 

Yea, iHacker is currently providing tech support and the problem lies beneath the dash where I tied in for switched power. I didn't have the white wire he used in his PDF instructions, but he said any switched power source would suffice. Apparently I picked the wrong switched 12v power. I need to find a new switched power by the relay below.

 

Wow your truck looks nice, and thanks for trusting me messing with the wiring in your truck

 

So everything went well. I did have some issues with where I tapped into 12v power next to the flasher unit. In the photo below, don't use the gray wire for switched power as I did initially. Instead, release the connector I've highlighted and tap into the black wire on the right hand side. Thanks a million @iHacker for your assistance on this, and feel free to use the photo for anyone doing an SR5/Limited/Pro install.

 

And as I suppose for SR5 owners if you decide to leave the gray wire on to keep your Ambers and LED DRL at the same time be prepared for weird things to start happening, I’m not sure why but SR5s wiring is a slightly different from my TRD PRO, and the white wire I used to t-tap 12V switched power is gray and for a different function in SR5s @rocky_mtn_trd had a little delay today to make them work properly but we still investigating the problem it seems to be some kind of back feeding in the gray wire, the problem itself isn’t related to the harness because I only use the gray wire to trigger the LED DRL relay in my harness and that’s it, but he decided to have Amber and LED DRL.

He’s going to share more details on the issue.

 

This is specifically for a 2017 SR5 not sure about previous years.

 

I guess I didn't elaborate on the issue I had. I lost turn signals all together with the t-tap on the gray wire as pictured above. @iHacker suggested to remove just the blade of the t-tap and see if turn signals returned. They did indeed. So now I had to find a new switched 12v power source. I would upload a new photo of where I ultimately ended up tying in for 12v power, but it's dark and cold right now so I just added an additional arrow in the photo above designating where to make the connection. I have no idea what the problem was, but this fixed it and now I'm a happy camper. I briefly had a backup camera problem where it would't come on in reverse, but it resolved itself after cycling the key off then back on. I don't believe this to be related to this install whatsoever, I just think it was because I had the battery disconnected for a couple of hours today. Very pleased with the results!







Low Beams


High Beams

 

This is exactly where I mounted my relay as well...Nicely done, and nice truck!

 

Looks good,will be tapping the gray wire to keep the auto light function on my 17 limited.