What have you done to your 2.5 gen Tundra today?

Used the 25% off promotion from Fred Anderson Toyota to order a new drivers door lock actuator. Mine has randomly not locked or unlocked about 4-5 times in the past two weeks. Pretty sure it’s on its way out soon.

 

+1 on the 25% and free shipping use, except I went through sparks

got these to replace the pro bilsteins next year

 

Part number?

 

PTR61-34190-LF
PTR61-34190-RF
PTR61-34190-RR x 2

you’ll also need the rear brake line/ speed sensor extension brackets if your non pro to compensate for the longer travel. I believe Ironman 4x4 makes an aftermarket version. I’m not quite sure but I know somewhere on here is a post about those parts. Not too difficult


Correction, here you go

https://www.tundras.com/threads/need-help-with-ordering-pro-speed-sensor-extension-bracket.111918/

 

Looks awesome

 

Thanks for that discount code... I used it today on an OEM metal filter housing for the wife's Tacoma

 

Thanks!

 

Work the problem...

 

Thanks for that code! I had already ordered the blower and rear tailgate letters, but ordered again using the code for a tailgate lock kit and front rotors. The code seems to be one time use only, as I went back to pick up a PRO exhaust kit and it did not work.

 

Installed a "New in Box" Drivers Side Grab Handle I got from @Jchetty

My wife is quite pleased.
Thanks @Jchetty!

~TBS

 

Congrats- those are getting quite rare- You wasted no time installing I see.

Glad it got there in pristine condition. Enjoy- surprised it took so long to sell. Looks amazing

 

new trim is in (if anyone wants/needs the gear selector squigly piece, lmk Ill give it for free just pay shipping

I tried installing my dasaita but apparently I also need the cb004 harness, so now I wait for that

 

You will like it.....G13 256MB with T-Mobile digits only SIM

 

Thank you sir! And no kidding! That is why I refused to buy one for years. But now that I have this place, it was my first purchase lol. You can store yours here if it helps... but I feel it may be a bit out of the way...

 

Scored a NSV light bar with the dash insert and strobe button which is no longer offered. Also came with a brand new wiring harness kit and the new triple clicker button design. Got it for 250 bucks!!

 

Well it only took 15min to install. Honestly it took longer to unwrap the great packaging you did keeping it protected during shipment. I appreciate that.
As soon as I saw you had a NIB setup, I did not hesitate. Something like a NIB was quite a find. Thanks for helping me out.

 

how long have you had the Daisata installed for?

 

We’ve got another guy with a shop over your way now too

@memario1214

 

x2... on the GR code

Thank you @00h2itr

 

I've been using retractables for almost 8 years now. For my mower, 4 wheeler, anything that needs to be tied down. I will not use an old school strap, I fucking hate them and always pinch myself. The retractables are amazing. The only down side is they usually have a limited length strap (6 feet or so) and you might need some long old school ones depending on your set up. But I love them and will never go back.

 

Clear coated the orange part with 1K Duplicolor Clear Gloss. Putting fogs back in tomorrow.

 

I've had it for 1.5 years and not a minutes trouble

 

I should stay off of this website. Black interior door handles and the LC brushless blower have been on my list for a while. Thank you to whoever posted the GR code. Much appreciated.

 

Working on my beauty pannel for my rear doors to protect the speakers, early stages not finished look.

 

https://imgur.com/KK0dhqa

Just wondering if anyone can help with me a sound. You can hear it at the bringing of the clip, it then goes away, and then comes back near the end. Sounds like a rattle, vibrating, tin foil tapping something. It only happens between 1600-1900 rpms then the truck usually shifts and it goes away. Never any other time. I don't hear it in 6th gear cruising at 65 mpg neither. I checked the exhaust and everything seems to be bolted up fine (stainless works headers/spd cat back). Just can't figure it out as it's only during those RPM ranges never any other time. Not at idle, not at 2,000+ rpm, even if I get on it and it shifts at 3,000 rpm the sound isn't there. Just 1600-1900 rpm driving normally. Been losing my mind on it since I drive with the windows down 90%+ of the time and have to deal with it. Thank you!

edit -- added YouTube links too https://www.youtube.com/shorts/NkNSsEDJl4k

 

Glad to see you all taking advantage of the GR code in conjunction with the running 25% off. I think that sale/combo is good for another 7 days for any others who have OEM parts needs.

 

Have you tried turning up the radio to see if it goes away?, sorry not funny. Do you still have the heat shields where the stock exhaust was? Maybe the sound at that rpm is enough to make it vibrate if one is loose? Thats about all I got so far, but I have noticed annoying sounds get quieter if not go away when you turn the radio up...... unless its the wife, that's a crap shoot. It may go away it may make for a bad day

 

Agreed, what a PITA. I just use them to strap my scoots down on the Kendon trailer, and once to reseat a tire on my Gravely. I'm going to look into retractables.

 

LOL usually drive with the radio up but this sound is just annoying. I'll take a look at those heat shields. Haven't thought about that tbh. Thank you! will report back if I can figure it out.