1st Gen camper shell buying info

Not sure I really understand what you're envisioning with a door but the gap is about the width of my fingers. Meaning I can slide my hand up in it.

 

No low balls, I know what I got

 

Anyone have a good recommendation for a tailgate seal kit?

 

I been eyeballin’ this one

$50 ESI ROK Block 4.25" Width Tailgate Gap Cover and Ultimate Tailgate Seal with Taper Seal 6ft for Sidewalls

https://www.amazon.com/dp/B00R8KBV9Y

 

I took my leftover double bubble and cut it with a razor blade.


Also used leftover flat weather strip to go under the tailgate and as pictured on the bedsides.

 

Leaving this here as a placeholder. This is the OEM 3rd brake light for my SnugTop. Manufacture: American Technology Components Incorporated P/N: AT-LED-28X20-02
https://shop.atcomp.com/at-led-28x20-02

 

https://offerup.com/item/detail/b5c6dfa3-88ee-3054-afcb-fbc6a6ebb7b5

AC snugtop cab high

 

Windoors!

 

Well I finally got the correct wire harness for my brake.and dome lights. Now I just have to figure out how I should tap the power for the dome light.

What have y'all done to power your dome lights? The vague instructions say to tap into the factory dome light, but I don't want to do that. I'm thinking I'll have to run power directly to the battery, unless y'all have a better idea.

 

Cargo lamp circuit.

Behind the dash going up to the left "A" pillar is the wiring for the dome, cargo and high mount lights. The cargo light wire is red with a black stripe. The ground is white with a black stripe. I tied into that and ran a line down through the gromet under the carpet and to the back.

 

$100 has a broken back slider window, but it has WINDOORS!!!!