WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

I think they are injection molded (but I could be totally wrong) - if they are printed or CNC'd then they probably can do it easily

 

Yeah, I'm sure you're right. BOOOOOO

 

Did some sketchy drilling on the bed last weekend, trying a mounting system for the dirt bikes. So far so good in testing, we will see how it goes. All in all pretty easy but composite is more like plastic I suppose.

https://youtu.be/oAaKu1Gfuq8?si=JELPR0Owm3lvo70B

 

Nice setup! Glad you made a video so that I can know where to put mine as I’ve been wanting to do that for two-bike setups in the bed of my truck. I still prefer to go diagonal when I have a single bike in the bed bc you don’t need that much tension in the ratchet straps with how my front and rear tires wedge into the corners of the bed.

 

I got one on Amazon that's just matte, no faux screws. Looks great. I'd put a link here if I had it, but should be easy enough to search.

 

the Amazon one is an overlay, ive seen those. not the same thing.

 

I put in the 12 inch L-Track so that I could go diagonal if needed, however for me with the bed cover even rolled up and the 5.5 foot bed it is super tight to put the bike in diagonal. I think if I was really going to do it I would have put in 36” track instead of 12, I can make it work as is but it wont be ideal.

 

Have you seen these from Versatrax? They mount with the existing bed bolts. I have two of them for extra tie down spots.
https://versatrax.com/collections/frontpage/products/tundra-l-track-tie-down-anchor-rails

https://youtu.be/gqlm-SAB20M?si=VADkfXLd6G9Y5gbT

 

I looked at those, very cool. For my application, 2 dirt bikes they didn’t work with the location of the bikes foot pegs and for tow bikes I needed four L-track mounts. If someone is loading one bike this might work. But that’s a pretty nice L-track mount for sure.

 

Ok, cool. Just pointing out an alternative option to get rid of the gloss.

 

Just installed a set of these myself. Took about 10 minutes. Much better look imo.

 

Installed Fuel Rebel D680 wheels 20x9 +1 offset - not sure how I feel about them yet. I may end up selling lol

 

They'd be ok if not for all the fake beadlock bolts.

 

thats gonna be a no from me, dawg

 

They look good with the matching color!

 

Cracked its windshield. Prior repair attempt started cracking again. Went through a car wash and as soon as water hit the glass, it popped. Im just gonna let it be for now. If i ever get a tint ticket, I'll have the glass replaced....this damn thing is cursed and Im not gonna spend $1800+ out of pocket on this right now.

 

Looks great, I keep thinking about these myself

 

Where did you get those center caps?

 

Not OP, but I purchased those same center caps with part number PT998-35221-3S.

 

Awesome! Thanks

 

You bet. I got them from Toyota San Diego for about $10 each.

 

Three beer project (maybe more watching the paint dry):

I had some plywood left over after helping my daughter with her Tacoma bed build-out this weekend, so I decided to make a cargo divider now that my Lomax cover is installed.

I used 3/4" plywood, but added "blocks" on the end to fill the 1.5" slots. I also added an adjustable carriage bolt to lock it in place in the slot. I did start with a scrap 2x6, but this lighter, looks cleaner, and is taller.

I will probably make some adjustments after I use it for awhile, but I plan on cutting-out some handle slots, adding a few other slots for tie-down points (or some unistrut), spraying on a layer of bed-liner, and replacing the carriage bolts with rubber bumpers.

 

Did you post pics of it. I’m debating on going the topo version of that center console. I like the inlays too that are topo. I have an all black one, and thought the topo would add some variation but keep it clean

 

Is that the oem one or the yoga specific one?

 

I posted a pic of just the center console and cup holder, but have not posted one since i added the topo knobs and the small red accent on the 4wd selector. give me a few and I will snap some and post them.

 

Downloaded car scanner pro today. Used my 10 years old Kiwi 3 OBD reader. Trans temp worked. Giving the fact my 24 only has 17K miles I’m going to check the fluid level since other people mentioned theirs was low from the factory.

 

here is an updated pic. (center console, cup holder, 4wd selector accent, drive mode knob, volume knob). keep in mind that it states the center console (topo version) does not match the knobs as far as the color lines. the knobs are whiter than the lines on the center console.

 

nice that looks awesome. I am tempted to get the topography one, I just can't find many pictures of the topography center console piece. Lots on the buttons etc.

 

yeah i opted not to go with the topo center console... to much "topo" for me lol. i just wanted small accents. same with the red accents. Also as noted on thier site, the topo center console just doesn't match the knobs and that would have bothered me.

 

break in oil change done. Wanted to do it at 1k but time got away from me, installed a Fumoto as well. Skid plate is actually super easy to get on and off, I was worried with everyone bitching on here but it’s a piece of cake. 6 month, need to drive it more haha.