WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

I applied Adam’s Graphene coating to my rims.

I also installed some detailing grid lights in the garage, can’t believe how bright they are for sale lights from Amazon and what a difference they make.

 

Also recoating my wheels, again with two coats of Gyeon Evo Q2 Rim Coating. This is after prep, before coating application.

 

I installed a center console wireless charger pad! Shout out to @60centenergy this is a sweet design! I like how flush it is and the material is like a flexible rubber and not a hard plastic- which is nice. Install was about a minute lol but I took an extra 30 to unbolt the safe and hide the wire under it. I think it came out pretty clean. Used a black wire and can barely see it from the back seat too. Way better than the hard plastic tray Toyota gave us!

 

Eibach struts, PRO UCA and Red axles. I wanted level and I've had good success with Eibach. I have the front end set at the same height as TRD PRO basically
the same thing I did on my Gen 2.5 with good success. My research says the only parts difference now between my truck and a PRO is the sway bar and struts. If I'm wrong please correct me.

 

Do you know if the trd OR package on a limited would need the UCAs? I’ve been intrigued by eibach

 

There are a lot more parts that make it different, but suspension wise, I think you're right.

 

I don't think the UCA was a must have for the small lift I have but understand they adjust a little easier.

 

I was just talking about front suspension and steering. Lots of cosmetic differences and I'm not a hybrid.

 

Stoked to finally update front bumper to something a little more substantial with tow hooks and winch. Original plastic bumper was barely hanging on. I also feel a bit more prepared now with a self rescue if necessary. A lot of my adventures are solo. Also added some rock sliders. 2 days 2 late. lol. on my way to pick up my rock, sliders and bumper while camping I hit a small stump and destroyed part of the plastic trim under my driver door. Fortunately I was able to get the part quickly from my local dealer. I ordered the correct paint and it actually came out pretty dang good And now I have the sliders on there to protect it from the next stump. I got my bumper, winch, lights and sliders from RCI in Colorado. Extremely happy with purchase

 

what model did you get? I'm also looking for a front camera option.

 

Installed my AWE OFG exhaust yesterday and the cold start this morning made all the struggles worth it. Loud but has such a nice roar. My mpg will not be crying every time I give it some gas but smiles per miles is such a better way to live!

 

Nice - love to hear an audio clip of cold start... are they working on a tune by chance ?

 

I'll try to get a good video this week, just don't know how well it'll sound over phone audio. Haven't heard anything about a tune yet.

 

Installed Rough Country Wheel well liners. Simple install and I think it looks much more finished.

 

Well I sold the 2023 Limited yesterday. Got a quote from both Carmax and Carvana. Took the truck to Carmax and they would not honor the offer as there was an outstanding recall for a fuel line issue. Drove home and waited for Carvana to show up. Got a decent offer for my 2023 Limited TRD with 49,900 miles. I probably could have gotten a bit more selling it private party, but this way no smog certificate required (CA requires seller to smog), no tire kickers, no haggling, no hassle.

The entire pickup process took all of 15 minutes. I removed all my bolt on accessories and off she went.

Now just have one Tundra, the Platinum TRD with Factory 3" lift!

 

I know you have the other, but are you selling any accessories??

 

Unfortunately not selling as most all of them are going onto the Platinum.

 

Picked up a new cluster cover. Will install protector on this one and swap it out. Pn is for digital clusters

 

I ordered a bedrack from Backwoods while on it was sale - stoked to have this complete out the bed and storage needs.... will add their storage boxes I suspect but waiting to see if I need that with the decked setup... spent some of the weekend getting all my stuff sorted and moved into the bins to be able to quickly swap out stuff for work travel, fishing or adventure...

I can see their rear bumper in my future ....

 

How difficult is the replacement process?

 

Hopefully the drone doesn’t drive you crazy going down the highway. I’ve heard mixed reviews with AWE. I had a tig weld. Let’s just say it sits in my garage. If anyone wants it. It’s for sale. Around town it wasn’t bad. Highway it was bad. Factory muffler is back on with a dump tip.

 

It's quite easy. I had never messed with the interior or removed any part of a vehicle ever, and I thought it was a piece of cake. This video is helpful: https://www.youtube.com/watch?v=gEVEdy69YWU&t=3s

 

Damn AJT Designs. Added the center console panel, center console tray liner, oversized cup holder, shift, radio and drive mode knobs. Fantastic quality.

 

Looks nice, wish the center console piece didnt have useless screws in it

 

I’m with you on this. I wanted to upgrade mine but couldn’t get over the decorative screws… don’t like overlays so I guess I’m stuck with piano black for a bit.

 

Yeah, if AJT removes them screws, I'll buy it right now.

 

I hated the shiny piano black & sideways cupholders, so even if I didnt like the look of the screws the tradeoff was worth it

 

https://www.ajtdesign-llc.com/pages...--17024952828003__contact_form_QkxQTX-contact

I sent them an inquiry asking if they could make them just all matte black no screws.

 

Excellent! hopefully they’ll do it.

 

Oh I totally get that. The must have a cad file for making these. just remove the screws... Otherwise ill probably pull mine and matte ppf it.