Sniv Speed Shop - Custom Parts and Design

Is this going to become the next "make sure you use PPF before installation" topic?

Also, the leather wrap may have just become my preference! I was debating getting it cerakoted to match my shifter, but the leather wrap is a really nice idea.

 

Again, I appreciate everyone's orders! I ran out of the XL shirts, but I placed another order for them yesterday along with shirts with the supercharged Tundra artwork! And then in the past two days I got more stickers in, so depending on when people ordered depends on what pack of stickers they got.

The current amount of swag in each order is pretty awesome! This is the kind of stuff I like from other companies, so trying to take it to the next level!

 

Love it! Received my order yesterday. Did so well at packaging, but I have to say... one of the life savers arrived damaged. I'm working through it now, though. It still appears to function normally.

 

From what ive received from other companies and if that's what i receive when I get my package I will say you HAVE gone above and beyond other companies

 

You'll be missing the Tundra and supercharger dude since those two arrived this week, but everything else will be in there. I wish I got faster shipping on yours, apparently Tennessee is the furthest possible shipping destination from Utah

 

Your good, good things come to those who wait! It should be here tomorrow from what seen last

 

Fingers crossed I get a smaller A/C pulley in my swag pack for those extra hot days here on the coast...

 

Talk about a road trip! If shipment packages could talk.....
thanks again Mr. Sniv! Im excited to get this done up and implement it into my build!

 

Sniv wares showed up today, and he wasn't kidding... these shirts are super comfy even before washing them


... and VERY generous swag pack







Looking forward to getting one of these bad boys washed and donning that additional 5hp!!!



Thank you, sir!!!!!

 

Got the swag and Boost Gauge mount, fits like a glove! Paint job looks 10x better than what I could pull off...hahah

Holy crap that mount is BEEF. Now I'll have to heat up that stupid plug that is right next to the fuel rail, so I can install the nipple. Good times ahead!

 

Let's see it installed!!

 

I probably painted it at least four times, and it was such a pain that I pulled the option for painting from the website. I even started looking into buying a powder coating setup, but that seemed like so much extra work that would drive the price up an insane amount. Yours I ended up with multiple layers of primer and sanding them down, multiple layers of paint and sanding them down, it was terrifically hard to remove the markings from sanding/grinding the plasma slag off and even though I didn't think you would see it installed, you would certainly see it when you took it out of the box and I didn't want that. Finally after tons of painting and sanding and finally getting a halfway decent finish I then clear coated it. That is the exact reason I usually don't paint stuff nor want anything with nice paint, it's so much effort and attention needed and even then it's not perfect and all for something that will inevitably get scratched anyway!

Paint rant aside, I'm glad you like it and that it fit Josh, you have the 1 of 1 "painted at sniv speed shop" product

 

Let me know if you have any recommendations on things to tweak with the DIY setup! Aside from the "tape the shit out of the packaging to the plates so they cant separate" issues!

You got a thiccq swag pack, I appreciate your long time support, plus ordering more shirts than anyone else deserved some recognition! Hopefully I can fulfill making a product you want hahaha

 

My pleasure... plus I love to watch people do things 'mechanically speaking' that I don't have the skill to do myself, but more importantly you've always been there to selflessly help and share you knowledge w/others. That's a quality that is rare these days, so I'm more than happy to support when/where I can; plus it knocks out a little early Christmas shopping for me at the same time...


PS>>> I am still waiting on and hoping for the release of the Snivilous Stainless Steel Suppressor line that we spoke of early on...


(especially since the $200 tax stamp fee is set to be repealed Jan 1st, 2026)...

 

SOLVENT Trap good sir.... solvent trap.

 

got it in, works great!

 

Looks great! Everything fit okay? It's tight and doesn't flop around with those push pins?

 

The Speed Shop needs more XL t-shirts.

 

I will let you know tonight or tomorrow as for the flopping when I go to work this evening seem pretty sturdy though, as far as fit, it could have been the angle I bent it to but in my unprofessional opinion I dont think it would hurt to cut the nub back a little on the small bend that goes to the dash on the drivers side. But all in all I am happy!

 

If you didn't put that sticker porn on the side, nobody would notice.

 

T-shirt order submitted... GTIQ-981072


So how much for a 2650 installed, fully maxed and tuned? with lifetime warrentee..

 

I was thinking 2x, must be something in the water in Tn, I was skin and bones when I lived in NY, moved here and met my wife now and ive swelled up over the years.

 

Order another 40x in XL only, and they'll be here end of the week!

Thank you sir! Was wondering who that was I actually just got home from running to SoCal for some meetings yesterday/today, I could've swung by and done it Starting price for just an install is about $3k (maybe a bit less if I'm doing only the blower and absolutely nothing less) and then up from there depending on options (pulley, tuning, wideband gauge install and wiring, etc). Ideally I would want the truck for a week. The blower package alone is in the 12ish hour range, but if we're doing more then that can quickly go up (wideband is like 4+ hours by itself between pulling the exhaust, welding, running wires, installing gauge, wiring into ignition and lighting, etc). So while I could sprint just the blower over a weekend, if it carries past the weekend at all may as well call it a full week since I have my regular job to work around also, so I can only spend a handful of hours a day actually wrenching. And potentially pickup and delivery services can be done too.

I could glue 2x of the XL together otherwise I will have to add that to the list for the next order, I tried to condense the sizes as much as possible since having variety does not play well with the pricing game when you buy quantities as low as i do for stuff

 

Or better yet, I could just loose some weight....... might be the healthier cheaper option cause I can guarantee its not all muscle

 

The XL is not a lumberjack build XL. I was thrilled I could almost get my arm through the neck opening. 2XL, washed and dried, should be about what us husky folk need.

 

They are a bit on the slimmer side I thought, I'm not a big dude and the XL fits me pretty normally so I get what you mean, or I don't get, I understand

 

I'm sure the candy you sent will help me fit in it by the weekend. You infuse it with Wegovy, right?

 

So your saying every shirt order should contain at least a packet of ex lax, the more you spend the better the weight loss supplement?

 

So 76mm sniv pulley needs the following upgrades along with it for my 2650 maggy.

1. 650cc drop in injectors from turbokits.com $569
2. 5.7L Drop-In Adjustable FPR turbokits.com $258
3. DW300 In-Tank Fuel pump turbokits.com $189
4. 76mm pulley $100
5. Sniv remote tunes $300

With that fuel pump they recommend having a 12-gauge hardwire kit installed, so I'd need to rig up a relay to provide key on power to the pump.

Does that seem correct?