ScreenProTech - Gen3 Tundra

I bought the ScreenProTech full Gen3 Tundra kit, which is protective film for 14" screen, instrument cluster screen, black piano center console, and black piano control gauge cluster.

I went with Matte finish for the 14" screen and regular gloss everywhere else. The install was much simpler for the 14" screen then everywhere else. If you follow instructions, it's pretty simple..........I did not need the extra film for mistakes.

Pro-Tip...........Use a hair dryer (w/ extension cord), and crease tools that come with the kit on the center console. The film wont seat easily in all creases or cure with a proper seal, if you don't heat it up.

 

I used the ScreenProTech, as well. Only I just did the 14" screen and dash cluster, both in matte.

Install was easy and the results were good. I only had one tiny bubble that I couldn't get out on the 14", but it went away after a few days.

I also bought a 2nd set in case I screwed up the first attempt, but it wasn't necessary. I'd recommend the product.

 

ditto, I have the dash and 14" screen as well.

great product, especially the dash which scratches super easy with no coating, now I can just spray and wipe and not worry about it, looks perfect.

 

Don't forget you screenpro Tundra shirt

 

I bought this, with the extras, then found out my radio already has one. So I have 2 extra lol. I need to do the console and speedo still though.

 

anyone have an extra for the dash digital instrument gauge cluster they are willing to part with? i already have my 14" screen protected, but that gauge cluster is a dust magnet and i am very hesitant to wipe it down knowing how easily it scratches.

 

Did the full kit in the tundra no issues. For the rav the is was getting them to sent the right kit. 3rd Tim was the charm to get the analog dash we order. Levi there was good at making it right and got on the warehouse manager.

 

It’s not bad. Tundra was easy but rav was a pain to install

 

already a thread on screen protectors including this one with reviews and installs.

 

Is ScreenProProtech still the only option for the digital gauge cluster dash screen?
Anyone buy the “backup” piece and not need it?

 

Same. I wish they had the option to buy just the gauge cluster. I went a different option for everything else. If you find something post it here. I'll do the same.

 

I emailed today asking if I can just purchase the gauge cluster piece. Let you know what I hear.

 

I purchased and installed the entire package last summer. One of the first things I did. This winter (New Hampshire) the large screen protector just rolled right up and fell off. They were nice, sent a replacement, but I never installed. It's going to get cold again.

 

My dash one ended up sticking to itself and the back up was put to work.

 

I also ordered the backup but didn't need them. May come in handy in the future

 

I put one on the 14" screen and the gauge cluster. After a couple months I had a day where it was really cold in the morning and hot by the afternoon. The 14" protector ended up peeling off completely on its own. They sent me a replacement but I haven't put it back on yet. They mentioned the factory film could be on there still but I dont think it is. Did anyone experience the same?

 

Mine have been great, I have the 14” screen and the dash, I bought the back up package as well

 

Same here. 2 years with no problems. I’m betting the ones that have peeled off were installed over the factory shipping film.

 

want to sell the backup dash protector? never heard back from ScreenProTech.

 

I can't speak for others, but I bought the backup set so that I'd have...a backup.

It's $80 for the entire set. Why not just purchase it and have a backup for your 14" screen?

 

I already have 2 backups for my 14" screen...so now just trying to source the digital dash protector and not drop another $80.

 

Just curious why folks want a digital dash protector?

I picked this one up and works very well for the infotainment screen.

$30 Spigen Tempered Glass Screen Protector [GlasTR Slim] designed for Toyota Tundra(2025-2022), Sequoia(2025-2023), Tacoma(2024/2025), 4Runner(2025) 14" Dashboard Touchscreen - Matte/Anti Finger Print

https://www.amazon.com/Spigen-Tempered-Protector-Dashboard-Touchscreen/dp/B09W46VKGP/

 

To prevent scratches while cleaning ...works great.

 

OK, fair enough.

 

That digital dash area scratches very easily.

 

Have you guys located a dash only screen protector that is tempered glass?

 

^ this

you even look at that it scratches, lol

with this on, I just vacuum it lightly with a brush and poof, perfect, works great

 

that isnt going to happen, its curved and not flat plus there is no way to install that without taking it apart

the screen pro tech is perfect, I recommend just going with that.

 

not really, I kinda wanted the extra in case I need to replace, I wouldn't even know what to charge thats fair anyways

 

Thanks for the reply. May have to pony up the money if no one is ready to sell off their backup protector. I have a few light scratches and I am very careful on how that area gets cleaned.