Official Banks Power 3rd Gen Tundra Discussion

Hello group,
Any vids on a 2024 Pro iDash Pro install? Is it easy to route cable(s) through pillar down to the OBD? I already have the PedalMonster, how do both units interconnect?
Thank you!

 

@kamaaina1 Jay from Banks here. Running the cables are fairly straightforward as you'll see in this installation video. Regarding routing, see this video to learn how Banks devices daisy-chain and use a single OBD connection.

 

Thank you! Just ordered the set.

 

Hello group,
my PedalMonster is still on version 1.5. Should I upgrade firmware on the pedal monster from 1.5 to 1.7? if not, is there a way to update just to version 1.6?

 

Please update to v1.06. There is a bug with Toyota PIDs in 1.07 which will be fixed in 1.08. You'll find the firmware and instructions here.

 

Installed the Banks iDash Pro coupled with my existing PedalMonster. Easy and straightforward install. This thing is slick! Right now I have it set for pedal monster, Turbo boost, horsepower, coolant temp, and tranny temp. Love it!
And a big thanks to Jay (ToyFan) for quick and top-notch customer service!

 

Just ordered this for my 23' trd pro. Will update(friday when it comes)!

 

What settings are you running for your pedal?

 

I flip-flop between City 5-step increase and Sport 4-step, both with truck in normal mode. When I want a little thrill, I'll set truck in Sport, and PedalMonster in Track mode at highest setting. Whoo-Hoo!!!

 

I cant even imagine how easily those tires break loose!! They already break super easy JUST in sport mode.

 

Just got my upgraded iDash Pro today, everything works great, I now have quite a few more parameters, especially oil pressure and transmission gear.

However, trans gear is still just P, R, N, D, is there any way to fix this to see actual gear? I'm running most current firmware at 1.08.

 

I also found this post where a member successfully got the gear added: https://www.tundras.com/threads/gear-indicator-found.131129/

I did pretty much the same thing with the Car Scanner ELM OBD2 app and an ODBLinkMX+ scanner, and using the Toyota 2016+ profile like he said and it works!


So, I have no idea why we can't get the actual gear number added to the iDash Pro?

 

Is there any eta on a cold air intake for the 3rrd gen or charge air pipes possibly. I hate to see that the tacoma that just came out got them before the tundra. I get that they sell more but not fair.

 

I have a thought that there maybe more aftermarket stuff coming out since the 26 is almost here.

 

Has anyone with the Banks/iDash Pro experienced their iDash Pro rebooting while driving or after stopping at a light? I've experienced it the past couple times I've driven my 25' Tundra Hybrid.

Today's was after coming to a stop at a light (perhaps the engine stop/start feature caused this?)

I'm on the latest firmware/software for both the iDash Pro and the Pedal Monster. Thanks!

 

Yes, it's kinda quirky in my 24 Pro (hybrid). you may need to go into the settings an adjust the voltage sensitivity and set vehicle to Toyota & Hybrid. Rebooted a few times, but now going on 5-days without a reboot.
Let ToyFan know as well, to keep Banks aware of these issues.

 

Thanks! I'll have a look at the settings and make sure I have things set as they should be again. Appreciate it!

 

I believe I set the voltage sensitivity to the highest or second highest setting. Also, the iDash Pro may not shut down right away. The hybrids seem to take a few minutes to completely power down.
PS: I love this iDash Pro! Great info and accurate readings. I believe there are close to 100 readings available for the gen3 Tundra's

 

Does the pedal device work for the hybrids? What does it do for the hybrid pedal?

 

you betcha! Works great. Increased pedal response. You can run both the iDash and Pedal Monster together. Pic shows my setup.

 

Ive been running with the traction off on every ride. Pain to hit the button all the time.

 

Do you think you can get any cooler air than where the OEM snorkels get it from now?