OBD Fusion app question

I have the app paired with a Veepeak OBDCheck BLE + scan tool. When i set up the app with my Tundra, I do not get any trans temp display. For the life of me I cannot figure out what I have/have not done.

any assistance would be much appreciated.

 

You can add the custom PIDs for it in OBD Fusion. GCS has the info on this page: https://genuinecoolingsystems.com/pages/support

 

Try using the search on here. I did a basically step by step how to in another thread. I can't remember which one and don't have the time to find it at the moment.

 

I was able to download the gauge on the app, but it doesn’t populate with any info. I was unaware I had to add a bunch of other equipment to get the app to work.

 

Do you have the ranges set for the display you added?

 

No ranges set or instructions.

 

Trans items is added manually in PIDS. Copy the info pictured

 

Awesome, thx!

 

When you add a display to the dashboard you can set it up to look how you like. One way to do it is by "Long press" the display you're trying to adjust.
Display configuration will be in the pop up list. From there you can choose the PID, Title, and Format

 

Get the custom Toyota PIDs for OBD Fusion and is all there.

 

Where do I get custom PID for the Tundra? I still am not able to figure out how to set up the info for the trans. Not finding this app to be very user friendly.

 

Did you buy the Toyota specific pack for your year truck??

 

Yes

 

I had a 2019 TRD OR CM Limited 4x4 with this setup. I was able to see both converter and pan temps with mine. I'll see if I can find any of the info I used.

 

Are you connected to the truck in this pick? None of the gauges are showing anything.

 

All the help is much appreciated.

 

No, I am not

 

Ok, with the OBD reader plugged in, truck started and the app connected to the reader, it still doesn’t work?

 

Here is screenshot of truck idling

 

Don't take this the wrong way - you just need some seat time with the app to start figuring it out. I don't recall having too hard of a time getting the pid to present via the app, but what I did learn is that it is absolutely critical there are zero typos and all is entered exactly as it shared. You sure you added the right year add-on package? You might also need to look into the communications settings and see if there is anything there that might be causing a conflict with your OBDII dongle. Once you get these things sorted, the rest gets easier and you'll be sharing dashboards with everyone.

 

Ha, no worries.. You are correct, I do not have a lot of time with this, but i am not even sure where I input that data info. It would be nice if there was a step by step for this app.
Yes, I purchased the correct year info for my Tundra.

 

As previously mentioned, there's a pretty long thread dedicated to OBD Fusion dashboards and settings.

 

Hmm, I will keep searching then.

Cheers

 

https://www.tundras.com/threads/obd-thread-pids-apps-dashboards.60459/