Which Would You Choose?

I know that it's my truck and I can do whatever I please. However, I would like some feedback on which wheels you prefer? SSW Dakars, RRW RR7-H, or KMC Impact?

 

For now I’ve got the RRW wheel with the billet ring. Works great never let me down.

 

What is the color of your truck model? Crewmax?

 

And never fear! That why this place exists, I ask questions like this all the time.

without knowing what your vehicle looks like the third option, bottom, looks the best to me.

matte black usually looks ideal for our trucks, but offset matters too. Difficult to find wheels for us stock guys that don’t stick out and spray the sides of our truck.

also, what size tires you running?

 

Hahaha shrek!

 

As some more options too to make your life worse, hahah, here are some choices I’ve seen I really like, usually 18x9 with 18 offset to 40.

 

As listed on my profile, BBP = Blazing Blue Pearl. CM = Crewmax

I hear yea. I don't want much poke. I'm stock right now. When I do upgrade my wheels, I plan on getting bigger tires, then there are choices...315/70/17, 285/75/17, 295/70/17, 35x11.5x17, 35x12.5x17, etc.

 

If you plan to level or lift, go with a 18x9 with anything 12-25+ offset, especially that big of a tire. It will also affect your speedometer due to sizes of tire. So, that would need recalibrated.

if you plan to not lift and just to run beefier for your tires that are slightly larger than stock, especially want to minimize poke;

MR318 (Method) are amazing or the 960B Alpha (raceline), 18x8.5 with 35-40+ offset, about 0.5 poke, no spray.


There is a member here with a similar blue truck and set up.

check this out



https://www.tundras.com/threads/method-318.122577/

With the blue, MR318 wheel would look awesome, and slightly more than stock too.

personally I would avoid lifting too much or too large a tire. It affects ride quality and can cause vibrations issues.

also ensure the wheels are hubcentric or close to it!


The hub on our trucks are 110.1 mm, anything more than 111 hub bore will cause problems. Also correct lug nuts are crucial.

aftermarket you’ll need M14x1.5 sizing

 

Yea, I planning on lifting/leveling it, too.

Not Blazing Blue Pearl, but Calvary Blue instead (Photocredit goes to @Backslider):

 

Those looks dope!

 

Is that a wheel from above?

 

Yes. Option #3 KMC Impacts

 

Check out the methods, they are awesome looking.

 

Raceline ones too

 

i vote for the SSK Dakars. They look a bit more simplistic and appear to have a better offset for the finished look.

 

MY son has these, Method offers a center cap with the Toyota Heritage stripes. Looks great on his Tundra.

 

Bead locks too, simulated or otherwise are kinda not as popular as they once were.

 

do you have any pictures you can post or have him send you?

 

https://www.methodracewheels.com/co...NqqRCZ6hHa2XbzjnkeNG-9Vi1Jz3nuqCOXi88kcAjEAAL

 

SSW by a mile!

 

I absolutely love my RRW RH-7’s got them in gun metal with the black rings/black bolts

 

That's the center caps! They look great in person.