Pictures of leveled or lifted 2022+ Tundras

I know there are plenty on the streets now. Lets use this thread to post pictures and please include details of what lift/level products are installed.

 

I used this front leveling kit for the Gen 2 and it worked well. I’m going to add 1” to the back as soon as it’s available. 35” x 11.5” Toyos and they fit well.

 

Not sure how this thread got so neglected. Here are my details.

Westcott Designs 3" front level only (Did not install 1/2" shim plate in the kit so we netted 2 1/4" of lift in the front) Truck is mostly leveled. Sits still sits 1/4" higher in the rear.

Kit found here: https://westcottdesigns.net/product/2022-toyota-tundra-front-only-preload-collar-lift-kit-new/

Measurements taken from center of wheel to bottom of fender liner.
Before
Rear: 23 3/4"
Front: 21 1/4"

After
Rear: 23 3/4"
Front: 23 1/2"



With Toyo Open Country AT3 35x12.5r18 Load D on 18x9 +18




She rides excellent, and ride comfort with just the front level alone is not very noticeable at all in my opinion. Rides very much like stock with possibly a tad bit more stiffness. Although I'm very happy with how she turned out, I personally would like a bit more wheel well space. So I bit the bullet and purchased the full 3/1 kit from Westcott. Once it arrives and installed I will update with more photos showing the difference from the full 3/1 kit and front level alone. Basically we'll be installing the rear 1" spacer, along with adding the 1/2" shims to the front that we originally left off, along with any bump stops and shock extensions necessary.

 

I wanted to go with Westcott front only lift, but when I called Westcott and spoke to Eric, asked if I can use just the front lift preload without the shim to fit 18x9 +20 and 35x12.5. He said it wouldn't clear on the TRD sports and I need to do the full 3/1 kit.

I like the look of just front lift alone on TRD offroad. Want just enough lift to clear 35's on fronts. May as well just wait for coilovers, wheels aren't coming for another 5-7 months.

 

Dang! That's a long wait for wheels. Seeing that the Sport is only 1/2" lower that the Off-road. I think it would still clear. I netted 2 1/4" of lift in the front without the top shim.
35s seems to be clearing for people running just the rough country 1.75" front level. Oh well, I'm sure coilovers are coming soon. I'm going to the full 3/1 just because I like the extra wheel well space. Not to mention it also looks really good from the pictures I've seen.

Sadly I had to buy the full 3/1 kit from Westcott, since they don't sell just the rear. So I'll be selling just the front part of that kit if anyone on here is interested. Located in Washington. Will part out the front preload collar/shims/bump stops (everything you need to level the front) for dirt cheap. I'll create a marketplace thread when the full kit arrives.

 

Old Gen 2” leveling kit. 18x9 +18 with 275/70 Cooper M/T

 

I will post some photos Friday. I will be putting on a RC leveling kit with 295/65/20 tires. Still deciding between Cooper STT Pros or Toyo open country R/T.

 

Go with the Toyo’s

 

Westcott 3"/1" on Cooper AT3 XLT 285/65/20 with Mayhem Rampage 20x9 18mm offset wheels

 

That's a good lookin truck!

 

Thanks! Peep your take-off mud flaps installed on it too! lol

 

Finally had the RC leveling kit put on and 295/65/20 Cooper STT Pros. I think it looks more like a truck finally. Monday she will get the ceramic coating and soon a bed cover. I added the tape measure so you can see the before and after with level and tires

 

@ToyoTundra89 Nice truck man. Hey, when you did the lift, did you notice any difference in gas mileage? Was that before or after the bigger wheels/tires? Hate to be that dude, but I commute an hour to work 1 way haha!

 

Little to no affect on gas mileage with just the lift level. I could still get the dash to show 21/22mpg.. as long as I reset the trip once on the hwy lol. You'll only see the effect on mpg with the larger wheels/tires. It'll be about 2 to 3 mpg loss with 35s.

 

Bilstien 5100’s front and rear with 2 inch dobbinson heavy duty coil springs

 

First pic, factory new. Car tires & all.
Next, RC 1.75" level on front, then 1/2" cornfed spacer in rear. 285/65r20 Nitto Recon Grapplers.

 

2022 platinum hybrid. 3/1 wescott lift for avs/air suspension. 17” scs +20 wheels with 35”x12.5” toyo tires

 

Yeah....my 2016 sits a bit low in the Ass End.
Pretty sure it's due to the aftermarket bumper.
Need to get off my ass and fix it...been to fixated on the Magnuson lately.

 

(Complete Update) Installed Bilstein 5100's front and rear with Dobbinson 2" Heavy duty coil Springs and I'm currently running Nitto G3 load-e tires 275-65-R20.
1. It rides much better now, before a little jumpy with the load E's but feels more planted now, at highway speeds of 75 MPH felt good and on two lanes with Bumby roads felt good too
(Not as smooth as when it had OEM tires but still very comfortable)
2. Towing is much more pleasant not nearly as much Squat, hooked up my boat and much better, will hook up camper next.
3. (Cost)- Here is a break down.
Billstein 5100's Front and Rear from Tire Rack shipped 523.87
Dobbinson Springs 2-Inch lift, 550-770Lb from MUDIFY.com shipped 374.51
Installation 525.00
Alignment 141.23 At Toyota
4. Ride Height
Before lift Truck sat at 36-3/4 front and 38-3/4 in the rear.
Now it sits almost at 39" in the front and 41" in the rear.
(Side Note) If you want it leveled, I would go with the Dobinson 1" heavy duty coil springs but if you tow 2" is perfect

 

Well done!

 

Love the casual torch / flame thrower chilling in the bed - is that what it is?

 

Eibach pro truck leveling kit front and rear. Rear lift not adjustable about 1-1.5in, front is adjusted to lowest setting. Drives great for half year so far. Love it

 

I believe that is an antenna of some sort

 

285/75 R20 with factory TRD lift

 

3 inch ready lift, +12 offset 20x9 vision wheels, nitro 35 12.50 20

 

nice stance. I’m on the fence between dobinsons HD 1” and 2” rear springs. When you took your rear measurements how much weight did you have in the back of the truck including diamond back? Thanks

 

Little lift, 37s and trimming