2020 Tundra TRD Unusual Tire wear

Gang, I have a 20 TRD Pro. Over the past year or so, my truck is pulling to the left. I’ve done multiple alignments, but the problem persists. The outside of the front passenger’s side tire gets worn out sooner than it should.

Looking from the front, the tires look like it is bent inwards and not sitting straight.

What can the problem can be? Is it the control arms? The wheel bearing?

If I’m going to replace the control arms, I’m thinking about getting a lift along with it.

I wanted to get your opinion before taking it to a mechanic or dealer and possibly getting hosed.

Thank you.

 

I had a low tire pressure in one tire that gave me a pull to the one side.

 

How much lift in the front?

 

You've done multiple alignments yourself or did a shop do it?

 

I go to the shop to get it done.

 

Stock TRD Pro. No additional lift.

 

Thank you. The tire pressure is usually on the mark.

 

I assume everything is in spec on your alignment readings. Do you have any unusual clunks or noises coming from your suspension? Maybe check front brake pads for unusual wear.

 

Thank you. Yes everything is spec when I get it aligned. It gets out of spec within a month or 2. Just replaced brake pads. It lasted me 87k miles. No clunky noises from suspension.

 

2WD or 4WD?

 

4WD. TRD Pro.