SABM - Stock Air Box Mod - Parts

For sale - parts for the SABM install for 2007-21 Toyota Tundra. SABM adds a second 3” opening into the fender well to add additional airflow for the engine.

Parts included:

• (2) Aluminum 3” Flanges
• Closed-cell foam insulation
• 3” All-Purpose Hole Saw
• Spectre 3” Flexible Intake Tube with (1) Coupler

Asking $50 shipped. This comes with everything you need to do the standard SABM aside from a 3” silicone coupler to reach from the fender well to the airbox - this also comes with aluminum flanges versus the standard cheap plastic ones from the auto parts store. Similarly, you could also reach out to Stillen to buy the grille intake tube and shroud - you would just need to buy a 90-degree 3” coupler for install.



Example of the parts I used and installed below to add the Stillen grille intake tube to the stock lower air box.

 

I haven’t seen this type of SABM before that’s pretty neat. You could do a double SABM with this method.

 

I’m skeptical. Show me the Dino data. On the FGT side,we learned none of the intake mods resulted in any significant gains.

 

Potentially, it’s definitely an option!

 

There’s information all over the forum about the SABM, feel free to do your own research. That being said, combined with the Stillen tube, I noticed a significant reduction in IAT’s - even sitting in traffic or a drive-through for extended periods of time, it’ll drop back to ambient within 5 minutes of driving in 100+ temperatures .