Led headlight fogs stopped

Installed these $50 led 6000k LEDs to match the led fogs and now the fogs don't work and further more the fog rotory switch now activates the high low haha.....wtf did I break something....

 

9 out of 10 times, adding a resistor to the circuit has solved that problem.

https://www.superbrightleds.com/mot...d-headlight-bulbs-h4-connection-load-resistor

Plug N play into headlight harness and all you may need is one.

 

hello and thank you for taking the time to respond, how do I get my fog lights to turn back on...... is there a fuse somewhere...... last night I slept on the idea of just unplugging the fog lights from the factory harness and adding my own harness and my own switch on the dash haha

also, I don’t think the beam pattern from the LED lights in these headlight housings is very good. Actually it’s pretty bad so I might just upgrade the harness to a heavier Gauge and use 120 W Ican bulbs instead. Dang, I might just add a toggle switch dedicated for the headlights too

 

Install the resistor inline with the headlight harness as bubbaw suggested or reinstall the halogens you took out. The issue is lack of resistance from the LED as compared to that halogen.

 

The company ended up sending me nice pigtails that go between the LED bulbs and the factory harness after using the headlights for roughly 20 days and noticing one of the bulbs, not wanting to stay in the housing and the light pattern being like a disco ball, which is absolutely pointless

I returned the bulbs and I’m going old school.
it looks like the previous owner already ran 100 W plus bulbs on the factory harness because the plugs have been baked so much. They are a hard plastic haha so ordering hella or piaa and a harness and calling it a day! F led headlights