Milwaukee Tools

I have not had great luck with Milwaukee bits

 

https://www.homedepot.com/p/Milwaukee-PACKOUT-Wall-and-Floor-Mounting-Plate-48-22-8485/310990289

I remember seeing some mounting this on the truck bed rail, how do you mount it? What hardware do you need? Also, what about the bottom half? Swinging?

 

Here it is:
https://www.tundras.com/threads/milwaukee-tools.150636/page-45#post-3846681
Because of the Renegade tonneau I used Integral Truck bedside panel drop bracket extenders to lower the mounting to the rails - https://integraltruck.com/products/...op-bracket-kits?_pos=1&_psq=drop&_ss=e&_v=1.0. Then, you can use any T-Slot fastener, such as

$20 RARAYC 6 PCS Bed Rail Accessories for Toyota Tacoma & Toyota Tundra

https://www.amazon.com/dp/B0BG7BMLX...04b4a&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw&th=1 or

MELIPRON 10pcs T-Slot Nuts Fit for Toyota Tacoma & Tundra Pick Up Truck Bed Deck Rails 3/8"-16 Thread Bed T Slot

https://www.amazon.com/dp/B09Z8Q42D2 from Scamazon.

 

So, basically a back plate then the packout plate then the actual packout?

 

No back plate. T-Slots in the rails, Integral Truck drop brackets attached to T-Slots (not needed if you do not have a tonneau), then Packout plate attached to drop brackets. I have a Bed Rug and the Packout bottom fits snug to the Bed Rug. (If you have an open bed then Integral Truck sells locking plates. I only used the brackets and not the panel.) I used two large Packout wall plates https://www.homedepot.com/pep/Milwa...L5dHSMxklMPfEqKZ_wRoCG48QAvD_BwE&gclsrc=aw.ds. I can grab some close-up photos if you want.

 

Right, I was looking at the single panel since that's all I have at the moment.
I have the Retrax XR, and so my front side is not gonna happen, and I kinda wanted to mount it horizontal on the passenger side before the wheel well, but looking at what Integral truck is offering, looks like a back plate or just the drop bracket is enough?
These are just duplicate of what our Milwaukee packout panel you just linked, correct?
Reason I thought I needed this because of the bottom part might swing, but am I over thinking this?

 

Almost correct. You use the Integral panel instead of the Milwaukee wall plate Yes - But the difference is the Integral panel locks the packout box onto the panel.

 

Ah. OK. Now that makes sense. I was royally confused for a bit that I am needing that backplate AND the packout plate, just to get a packout box on it, sounds a little, eh, weird....
But yea, that shipping is a tad on the high side, $20.49 (UPS 3 day, only option, to 77095)....

 

18v?

 

I use at least one of these every week

 

$240 Home Depot deal of the day?

 

This thing is violent. Ive broken bits and overdriven screws so many times with this thing..I gotta stay in lower power settings or only use it when I really need something with huge balls...otherwise I grab the m12 version...youll love it

 

Do you have a Link? That is a killer price!

 

Looks like QVC had a baby with TikTok.

 

yuhp!! i don't care what the discount is, too much of a goat rope for me

 

I wonder if tool addiction is diagnosable in the DSM V

 

I'm a dumb guy with a smart wife. The V is kinda like a parody of the III
So absolutely

Other then the invaluable info you can source from it