Something so easy....

I went to replace my ignition coil for cylinder 7, I was seeing that misfire error. Expecting something straight forward. Well to my surprise, when I pull out the previous ignition coil, the rubber boot part decided to stay seated at the bottom of the hole.

Being cylinder 7, I have little to no visibility into the hole, and even if I did, I don't have a clue how to free the boot from the bottom.

Does anyone have some wisdom they could share with me?

 

Bore camera and a hook, harbor freight or Amazon. Cheapest option wins, unless you want it long term.

Edit: btw the easiest jobs are the ones that usually turn out to be the longest jobs.

 

Needle nose pliers. The loooooong skinny kind

 

Maybe something like a long nose hemostat?
https://www.amazon.com/s?k=long+nos...6732eba3f5765020d2a456&ref=pd_sl_434bfx09vc_e

 

A pick set helps. Run a straight pick or precision screwdriver between the boot and the spark plug to break the seal. A shot of WD40 can help. Use a 90-degree pick or hook to grab it; pull gently.

 

IMPORTANT: make sure you get the spring that goes in the boot between the plug and coil body!