Maxtrac 6” no cut for 4wd

I’m aware that there is another thread but want to hear from other members who have the Maxtrac 6” lift for the 4wd models.
I recently installed this kit on my 18 DC and don’t have any complaints as of yet other than the directions not being clear but with basic mechanics knowledge it’s not so bad. The kit even came with a differential skid which is 1/4” thick and powder coated. Knuckles are beefy and cross members are the same. The kit in my opinion seems very sturdy and fairly non-invasive due to the no cut design. Angles on the axles aren’t too bad and has no vibrations at take off or anywhere through the power band. This kit seems to be very affordable at around $1500 with no observed quality problems. I did purchase and install some 6” extended coil overs from RC instead of the spacers to improve ride. They provide a smoother factory ride in the front. I don’t have the print out but the alignment shop even commented on how easy to align it was. The whole project took two weekends by myself but only because I had to wait for two new CV’s as I screwed up the outer threads on them. Probably could have gotten it done in a weekend. Overall, the kit is stout and well made. Anyone have any other experiences with this kit? Anyone have any problems after running it for awhile? What is your overall rating of this kit? I’m not finding anything to complain about this far which is unusual and the reason for the post. Part # is K946764. Pics below are of my truck before any mods, after a RC 3.5” and after the Maxtrac K946764.

 

Looks great. Any update regarding this kit? I am considering to install this kit because of the no cut.

 

Wondering how this is working out for you. I was thinking about doing the same…

 

Original poster hasn’t been online since October 2022 so probably won’t see any updates from him. Maybe others that are running this kit will chime in.

 

I ended instaling the RC 6in lift kit that require cut. But interested in hear more about Maxtrac.