Extended Wheel Studs

Anyone install extended wheel studs? If so, what brand and model did you run? I have some Volks and the lug nuts only get about 4 turns.

I saw on the tacoma forum a member running these with his volks.

https://www.rhdjapan.com/kyo-ei-long-hub-bolt-57mm-m12-p1-5-14-2mm-spline-toyota.html

 

Those are M12x1.5. Our tundra are M14x1.5.

I’m also interested in getting longer wheel studs eventually. Been running the Rays lug nuts without issue for 20k miles now.

 

Yeah I noticed that. I've been running the Rays lug nuts for 30K miles with no issues as well.

 

Running Volks too and getting more than 4 turns

 

Changing my locks soon and will count to confirm how many

 

Please let me know. Thanks.

 

Four turns…? On lug nuts…?
I’ll say a prayer for you guys.

 

4 turns are dicey, 5x150 folks like to use Blackhawk for Kyo studs, super quick shipping.

https://www.blackhawkjapan.com/products/kyo-ei-sblc-1

They should have longer ones for gen 3s.

 

Did a little searching. The 2.5 gen and 3rd gen tundra uses same oem wheel studs. So just got to order same longer studs as 2.5 gen but obviously 24 quantity for 6 lugs.

 

I paint marked my wheel lock tool and counted 6.5 turns from thread engagement-torqued to 97ft lbs.

 

what are you changing your locks too?

 

Rays 19Hex locks

 

Bumping this thread. Went to install the first Rays center cap and only got 4 turns from the lug nut before torquing.
Removed the cap and will now explore extended studs.

 

Let me know which ones you get.