GEN 3 (2022+) Wheels and Tires Photo thread

18x8.5 +20mm Trailhunter wheels
Falken WildpeakAT4w 285/70r18
RC level

 

17x8.5 +25mm RRW forged rs7 wheels
BFG K02 LT315/70r17
Stock suspension

 

Would 285/75/17s fit a stock TRD OR, with +35 offsets? Wish there was a better way to tell without having to guess and hope. Do not want a BMC

 

Finally did it
275/60/20 Nitto Terra grappler G3 on KMC KM722 technics. No lift. No rub

 

That looks really good. The dark wheels and green color work quite well. I plan to go a size wider on my winter tires just like you. I might have to look at those wheels myself.

Looks really good!

Cheers.

 

Had a break in the pollen today. All cleaned up and put some shine on these new Kuhmos. 99.9% of my driving is on paved road so I wanted something smooth and quiet.

Kuhmo HP71 275/60/20 on a 23 TRD sport. Stock height.

 

Yup - love them in the snow and great ride quality

 

Does anyone make a bronze 18" wheel with similar offset to stock? Looking for one that has no tire poke

 

Took the stock Offroad wheels off and installed Factory Style Wheels - Pro Style 2020 F158 in satin black, 20x9 -12mm offset. They are replicas of the Tacoma TRD Pro wheels. The Tacoma and Tundra share the same bolt pattern but the Tacoma uses M12x1.5 lug nuts and the Tundra is M14x1.5. The bore is also larger on the Tacoma than the Tundra so I had to use hubcentric spacers and thinner shank mag lug nuts, all linked below. Leveling kit going on this weekend. At stock height and with 285/60 tires, it rubs at full lock on the mudflap and front inner fender liner.

Wheels
Pro Style 2020 - F158 Satin Black - 20x9 | -12 | 6x139.7 - Factory Style Wheels

Lug Nuts

$69 24 Black Mag Lug Nuts For 6 Lug Toyota Factory Alloy Wheels on Chevy Truck 14x1.5 Thread Size

Amazon.com: 24 Black Mag Lug Nuts For 6 Lug Toyota Factory Alloy Wheels on Chevy Truck 14x1.5 Thread Size : Automotive

Hubcentric spacers

$21 Hubcentric Rings (Pack of 4) - 95.1mm ID to 106.1mm OD - Silver Aluminum Hubrings - Only Works on 95.1mm Vehicle Hubs and 106.1mm Wheel Centerbore

https://www.amazon.com/dp/B0B3LMVYH7?ref=ppx_yo2ov_dt_b_fed_asin_title

 

Have a side shot to show the poke by chance?

 

I’m traveling for the next week but I’ve got this shot on my phone from the front if that’s helpful. They don’t poke out too much.

 

Have you taken it off-road at all? I'm trying to decide between 285/70r18's or 285/75/r18's on the same factory wheels.

 

not yet. We had our second son at the end of December, haven’t had a whole lot of free time between him and taking my 8yr old to and from sports and martial arts.

did get the ramps out and flexed the chassis on opposite sides to see how it clears. Zero issues I could see.

 

I know the life! My eldest just turned 3 at the end of February, and the youngest turned 10 months. Staying on pavement is worth it though. Thanks for the quick response, and congrats on the newbie!

 

Been hunting around all the threads here. I currently have a 2023 Platinum that I put 2.5 King w/ Ext Resy on front and rear alongside ICON Billet UCA's and have 35's with Method 18's on 0 offset and have slight rub at full turn in reverse. I am looking to move up to 37's on some 0 offset wheels. I am trying to determine if I am going to get rub by making this change after I better alignment or if this will work. Yes, I have already done the body mount chop as well and pinned back the liners.

 

Goodyear Wrangler Duratrac RT

 

If you are already getting some rubbing with 35's then I'd say you'll definitely get rubbing putting 37's on with the same offset wheels. You never mentioned what wheel width your using or where it's rubbing either. My guess is your going to need different wheels if you really want to step up to 37's

 

Fitment looks perfect! I saw you are on stock TRD Off-road suspension. Do you have any rubbing against fender liner or body mount? Did you pin back the fender liner or do any other mods? Thanks in advance.

 

How are the Michelin Defender LTX Platinums doing?

 

G003 295/65R20 On 2024 Platinum 4x4 Stock. No rubbing so far but the back thin plastic towards the rear looks close

 

A boy and his truck

 

Anyone else curious what a set of these new 4runner wheels would look like on a 3rd gen?

 

17x8.5 +25 rrw rr5-h with 35 in ko3s

 

Man, those silver wheels are fire!!

 

Thanks lol my last tundra and tacoma were both white with black so I wanted to switch it up. It took some getting used to but I like them. I had originally ordered gunmetal but called rrw to switch to brushed aluminum.

 

They look to be 20's on the sidewall? (Id be more interested if they were 18's.)
Any idea on width and offset?
Nice lookin' wheel.

 

Looks like 255/55r20. Those tires are way too small for a tundra, so takeoffs are out.

With 255s, I think the width of the wheel would be fine. Offset is a big question?

 

Do you live in SoCal? Swear I saw your rig yesterday.

 

lol no, Texas. West west west texas

 

First post here! New truck, had to get new tires. Spent tons of time on this page researching what would be the best tire and I settled on the Nitto terra grappler G3 in 275/65/20 SL.

Mileage does not seem to have changed. No noise, No rubbing. Sorry for the dirty truck, but it wont stop raining!