WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Amber/yellow light is always better than clear. The clear/white light reflects more off of the fog. The amber/yellow light doesn't reflect off of the fog and the light wavelength travels farther.

 

Way cool. Amazon?

 

Look like you do not have any lift, do you have spacers? Does it rub? Nice look I like it

 

you’d be correct. OEM TRD off-road suspension, 18” oem wheels, no spacers.
Previous owner pulled the brackets off, so all I had to do was pin the liner back. Zero clearance issues, UCA Clears no problem.

 

Installed the 454 Motorsports Delta Cage.

https://imgur.com/a/NjgzZf8

 

Really curious where this path takes you. Would love to stay updated on this!

 

Installed my X2 27F. Thought I was going to have to add a bend to the strap but it ended up bolting back in place. It's a very tight fit vertically but there's plenty ty of room side to side. Oem terminals reach just fine and clear the battery case. I wasn't going to bother with the top hold down strap since it's solid with just the bottom bracket, but it worked without modding it.

 

always is a terrible work to use. For fog/snow/rain/dust I agree. If it’s a clear night white is better

 

Just a wash…

 

Anytime Backup Camera mod. Finally the guys at ABC got us a solution!

Here's my writeup if anyone is interested.

 

Deleted all the exterior chrome/silver, added a bed step, added predator steps and replaced the factory grille with the TRD Pro grille (just need to paint the mustache red to match the body).
Also, hooked up a Carlinkit box in, so the kids can stream shows/movies on that 14" screen. Big win for longer trips/ipads die.

Next on the radar is the Sherpa Grizzly roof rack with light bar and either a bed rack or cab (for eventual rod vaults) and probably swap out the fender flares for the TRD ones since they're darker.

Oh, and got a brand new engine due to the recall (with five years of free Remote Connect for the hassle)! Least expensive "zero mile" vehicle I've ever purchased!

 

Have more pics of the flatbed? Looks dope!

 

ditto..... Aussie kit or ??

 

Flatbed mod, whoa, first I’ve seen on a 3rd Gen

 

Looks good all around man, nice rig. Lil b’s and a flatbed. Did you run a flatbed camper on that?

 

It's does fit the ca. Very well. This is my second one I've seen. One was for sale here in texas.

 

Installed the TRD CV Axles (silver).

 

I picked her up today. She finally got a name. Got the drop steps, the bed cover and the odb2 port lock. High theft around these parts. She also got the TAG system installed.
It was a very expensive day, but it was worth it.

 

Any pics of the Carlinkit install or in action? Contemplating one for my Tundra.

 

How did you swing 5 years of remote connect for free? Offered to you or you asked? Thanks

 

Addictive Desert Design bumpers.

 

yes! Norweld Tray installed in June of 2023. This was the second 3rd gen to have the conversion done. I ran a flatbed four wheel camper on it from 2023 o to about a week ago when I sold the camper. Looking to order a Norweld Canopy next and start building out the flatbed again. In the meantime, ARB compressor in one of the bed boxes, switch pro, and fabbing up a new higher clearance tow bar are in the cards.

 

Finally got my RB30 slims and got them sprayed. I did put them on backwards cause I like that look better.

 

I’m getting a canopy tomorrow so I installed helicopter tape where the bed rail plastic meets the bed side. Hopefully this keeps it from rubbing through and rusting like it did on my 2008.

 

Did you cut any of the plastic pieces off to help with the wavy bed caps?

 

nope, I will never see them again. Just don’t want it to be rusty if I sell the canopy separate when I eventually sell the truck. I also didn’t notice them being wavy. But it would be easy to cut some off.

 

I've never heard of helicopter tape before. It is a rather alarming set of words to use in a sentence, at least at first blush.

 

Haha it at least used to be used on the leading edge of helicopter blades. People use it for things like mountain bikes and standup paddle boards now. I got the idea from a forum somewhere.

 

Put on a sticker.

 

Fifteen52 wheels