WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Agreed!

 

Some prefer form over function, hence the prevalence of silicone, er, I mean aftermarket bolt ons.

 

What speakers you installing?

 

Do you happen to have a scan of the dash speaker locations? Looking to get some speaker pods printed for the dash with some tilt on them. Would be super grateful if you were willing to share.

 

I am picking up my 25 Platinum soon and want to do the same tire on 20” stock as you. How has it been so far? Any issues or rubbing? Good on snow and wet conditions?

 

I have the next size down and have about 1500 miles on mine. They have done well in the rain and snow for me.

 

Installed Afe tow hook. Plastic Trd skid plate didn’t have enough adjustment so I trimmed it with Tin snips. It has fibres in it that you can see when you cut it.

 

I am looking into this exact amp/dsp, but was not sure from the website if it bypassed the factory amp, or if it just acted as a preamp? Is there a way to make adjustments to this version of this amp? I also didn't see that on the website.

 

Pics are from a few days ago, but took her out to play in the ❄️

 

Any install tips? I had to abort my install attempt last week. I did not have access to a lift and couldn’t manage to get the threads started on the AFE hooks.

 

Westcott Designs preload collar lift kit, 17” Method 703’s with +35 offset, and 35x12.5x17 Toyo Open Country AT3’s in E load.

 

Yesterday was plus 3 degrees so I took the opportunity to lay on my back on a little piece of plywood. I found that I needed to thread the bolts in equally, that is a little on one bolt then switch to the other. From what I could tell this is needed because the bushing on the sway bar needs to be compressed slightly as you torque the bolts down. After I snugged the bolts down I started at 35 ft lbs and worked up to 55 as I read the horror story of the guy with the sequoia that had the tack welds on the nuts break off.

 

Much appreciated!

 

Installed Rough Country Wheel Liners and Sunsdrew Mud Flaps. WeatherTech Mud Flaps were on back order and I decided to spend 1/3 the price to test these.

Install including “cleaning the areas” took 57 min for all. Only hitch was the outboard bolt on LR wheel liner didn’t perfectly line up. It works, but slightly skewed. And the Phillips head screws (green in picture) on both rear flaps. Not an ideal access point with wheel on.

But all fits as expected, and hopefully will protect the front end of the stock running boards (mud/dirt covered).

$165 total well spent, hopefully.

 

If I ever decide to install hooks, u can bet I am gonna chase the threads first. Too many people struggling with this.

 

my bolts turned out (after broke loose) and tuned in by hand very easily.

 

Installed a Toyota tonneau cover picked up today at the dealer. Really like the look.

 

That is on my list!

 

Can you do me a solid and measure from the center of your hitch to the ground?

 

Will do when I get home from work!

 

A new name for my truck thanks to Mother Nature. Say hello to my Yundra!

 

Everything here is coated in a nice thick layer of ice.

 

Got the tailgate spoiler installed and wired. Now the back has marker lights to match the front. I was going to have it painted to match, but honestly, the black camo pattern looks great with the gray truck so I'm going to leave as-is.

 

Have anyone installed door edge protection and which one would you recommend?

 

Will be doing this hopefully this week. Just waiting for my plug to get in to wire them up.

 

Busy week, a few upgrades this week:
Icon Stage 4
Rough Country Rear Wheel Well Liners
Toyota OEM Door Edge Guards

 

new Rekgen mud flaps. Tires stuck out a bit so needed a little more coverage than the factory mud flaps.

 

Installed oem tow hooks.

 

I took my DiamondbackHD of to get this thing water tight, then caulked the top rails down and put it back on

 

OEM. Its color matched and pretty cheap. Install takes minutes.