Siblue’s 22 TRD O/R and 25 TRD pro

More OEM ambient LEDs for rear occupants. Also all four doors done.

 

Is that TRD Pro dual exhaust?

 

The chrome version. The truck came optioned with it.

 

What are your thoughts on ride quality with the Eibach setup? I need to rid myself of the SR suspension, but really will be looking for minimal lift

 

The ride quality on the OEM red shocks were soft and mushy feeling. The Eibach setup for the price is a step stiffer than OEM and able to handle turns without much body roll. It can be a bit stiff on highway long rides. I do still prefer Eibach over stock. I rode in a 3rd gen Tundra on Kings with adjusters and was leaps over the Eibach.

 

Thanks

 

I like the knife pouch at the driver foot area. Amazon find?

 

Oh nice catch it’s a Maxpedition Triple Mag holder.
https://www.maxpedition.com/products/triple-mag-holder



Also using in my LC250

 

Very handy! Ordering one, thanks!

 

Haven’t updated this thread. Here’s the new truck.

 

Looks great. I picked up a new one yesterday too.

 

This is the first mod in all my cars since high school. Before LEDs were a thing.

Footwell lights stupid simple. Always wanted to try this since they added them on 24s.
One Female 2 pin harness leftover from my 81080-0C040/0C050 collection wired to old VLEDs universal kit. The most plug and play DIY car ever.

 

These cut off pigtails are available free for anyone local to 91710. Only one is needed if you daisy chain the universal VLEDs kit for 24 or 25 owners.

 

Repurposed white OEM footwell LEDs to front door panels. Need two more to add to rear doors.

Will list the blue LEDs for sale from my previous 2

 

Where did you get these grill surround parts painted and how much was it?

 

Sparks parts I believe. Was under $2000 if I remember correctly. Worth the price of no chrome

 

Form lighting reverse lights.
Housings are smoked compared to OEM.
Ordered these when I had a Limited.
The red LEDs might be a little overkill with the TRD pro DOT “clearance” lights but oh well.

 

Only reason I haven’t gotten them is I don’t want the red lights. Too much imo. I cut the running light to my diode rear lights. I wish they had a non running light option and I would have them.

 

Following. You should update your OP to include the new rig!

 

DIY Dual Diode Dynamics Fogs SSC2 in both SAE colors.
Idea was in my head before BD kit came out but always too chicken to try it.
White fog is wired to stock fog harness.
For the pics the amber/yellow and white back lighting is wired via simulator box for now.

 

you've got 2 trucks now?

 

I traded in the 22. Didn’t want to start a new build thread.

 

Volk Racing TE37SB
18x8.5 +22
Falken A/T4W
35x11.5x18

 

I'm looking to attempt this DIY (not sure if the blue version is close to the oem blue color), is this a 2021 toyota tundra VLED footwell kit with added rear footwell? Secondly, to confirm is this set-up all running from that pigtail attached to the low wp connector on the dimmer? Pretty slick set up, I'm interested in how you went about the cable management for this DIY. Thanks for sharing this!

 

I’ve only used universal footwell kit and the add on rear kit. 21 Tundra kit is useless and not worth the added costs for this generation. The aqua is close to the OEM blue but not great for illumination. If you look at my early posts you can use OEM ambient light to match interior lighting and just use white as a functional dome light. Since you have a 24 you only need one connector from my #103 post

 

Don’t know white LED part numbers yet but I’ll get there. Left side ambient dash.
Had to swap existing white footwell LED to the dash piece.

 

Would you be able to ship one of these on my dime to me? I’d like to do this in my rig.

 

Mailed out two plug to you this morning

 

Thank you!

 

Could you please point me out where is the cargo wire? Thank you!