Official 2022 3rd Gen Celestial Silver Metallic Thread

I've never heard of this suspension setup. Let us know how it holds up.

 

Looks great the way it is! Just add some KO-3's

 

Ironman is great! They’re contracted with the US and Australian government, and all over the Pacific Northwest, so they must be good…? I had them on my 3rd gen tacoma pro and l liked them better than the OEM fox setup.

 

Drove Moon Pass today up by Wallace Idaho.

 

Shades of silver in Large, Medium and Small.

 

Here is my 2024 Platinum HV TRD OR. Absolutely love this truck and can't stop modding, haha! It came with the Retrax tonneau and TRD steps that I got a huge discount on since another dealership installed them and didn't disclose during transfer. 8500 miles/6 months old.

Current mods: 285/65/20 Toyo Open Country Trail R/T tires, TRD Performance Intakes and TRD Performance Tune, Borla S-Type cat back with carbon fiber tips, 3M High Temperature reflective caliper wraps, Ultimate 9 throttle controller, TRD Pro grill/front & rear bumper covers/rear spoiler/fenders with Rave Offroad stealth marker lights in the grill and TRD markers in the fenders and spoiler, custom wiring harness for the marker lights, Heretic 20" front grill combo lightbar, rear Heretic BA4 combo flush mount back up lights, PROTECH Instrument/AC Controls and Infotainment screen protector, Airlift 5000 bags, MOX Motors topography wipers, TRD Pro hood louvers with Rave Offroad TRD Topo inserts, AJT Designs cupholder downgrade kit, color matched mustache from Rave Offroad, Rough Country rear fender liners.... (dammmm, after typing it all out, I realize I might need therapy)

Waiting to be installed: Hidden ARB Twin compressor kit, 3 gallon hornblasters air tank, Hornblasters train horns, sequential turn signals for side view mirrors, Adams Polishes advanced 9 year ceramic coating (after I detail, paint correct and polish...stupid Colorado temps messing it up)

 

Colder than a witches' TITS (at 0 degrees).

 

Looks great! No lift?

 

Thanks! No, not yet. Waiting on the 3" TRD to get back on the shelves then I will probably get that installed...if it ever does.

 

23 Limited TRD
-Method 703 +35mm
-Wildpeak AT4W 285/75R-17 (C)
-GoRhino RB20
-BakFlip MX4
-15% LLumar ceramic all the way around including sunroof, clear ceramic on windshield.

No lift/level and zero rub or fitment issues on the tires. Might lift it around this time next year.

Diode Dynamics SS6 Amber Fog Lights will be here whenever DD can ship them.

Did the badge delete last weekend and swapped the chrome window trim with gloss black I ordered from Toyota’s Black Friday sale. Blacked out the front chrome Toyota emblem with an old can of gloss black spray paint and it’s held up well.

 

Finally snow!

 

I like your setup, very similar to mine. I think I would have done +35 offset given the option, it looks great.

I am loving the silver after having MBM on my last Tundra. It hides the dirt so well and the metallic pops when it's clean.
My 24 Limited with Method MR318 +0 with 285/75R17 Falken Wildpeak AT4W, no lift and no rubbing. Only other stuff so far is mudflaps and tint. Will be adding a tonneau cover/topper of some sort and steps in the near future

 

Looks great man! Wish I could have gotten mine without the chrome but I’m working on it. I almost went with the 0 offset in preparation for a lift and 35’s later on, but thought I’d give these a shot first.

 

Thanks! I'll likely end up with 35s or 37s too, but I had these Falkens which were take-offs from my GX so I figured I would run them until I can save up some more. Car/truck stuff is not a cheap hobby haha

 

TITS with beautiful shades of pink:

 

Glacier National Park Today

https://www.instagram.com/reel/DEGex2mSeL0/?igsh=M202Y3M2bHFxYWtr

 

Here we go

 

Great looking truck! Whats the tire size you’re running?

 

Thanks!
295/65-20’s
Seem to fit well with no rubbing so far
Liking the factory wheels
Might go to 18’s at some point though…

 

Looks great! Makes me consider cancelling my wheel order and keeping the stock set up.

 

Is that a solar panel on the hood?

 

Yes I had a hood decal for glare on the hood previously then I added a Cascadia 4x4 Solar Hood Panel that keeps my battery topped off in summer when my fridge runs a lot and in winter somewhat as my tent heater runs more.

 

Nice looking truck! Do you have the TRD lift? I have the 1794 limited edition and have been considering the same tire for mine. I’m not sure if they would fit with my pro suspension and wonder how much it would lower my mpg? I’d appreciate any feed back

 

I take my truck through the car wash at least 2 times a week, have you had any experience with running it through one and how does it hold up. I'm concerned that the wash might catch a lip and peel it off.

 

I haven’t had any issues. The 3M type double sided tape has been solid. But Cascadia 4x4 is a solid brand and there are cheaper knock offs that might have that happen

 

Realize it’s been some time, but did you ever get some color matched fender flares? I’d be interested in your black OEM set, if you’re looking to sell them.
Thanks!

 

Thanks!
Truck has TRD shocks on it and I believe the Westcott collars on the front and spring perch on the rear.
Rides great!
I’ve got a buddy with a stock TRD Off road and the ride is about the same.
Unfortunately no before and after regarding mpg’s… so far it was 17-18 indicated on the ride back from the dealer in TN… but the speedo is way off with the 295’s so I will have to do a gps miles vs gallons at the pump test to really know.
My experience with my Tacoma and 4 Runner was that yes, the lift definitely impacted mpg’s negatively…

 

Thanks for the feed back.. I live in TN which dealership did you buy from?

 

bought it from Mtn View Ford in Chatt… very nice folks