GEN 3 (2022+) Wheels and Tires Photo thread

Looks great! Where are you rubbing?

 

I think is with the Stabilizer Bar, but I'm not sure. The tire it's almost touching the UCA. I will go to the shop that made the installation today, to get better information

 

18x7.5 I believe

 

18x8

 

Sorry. These wheels are 20x8

 

Does anyone know if you can put different center caps on pro wheels?

 

I put 20 inch wheels on my SR5 and some used tires for now. I was waiting for thanksgiving.

Want to know which tires I can fit without rubbing and lift.

33*12.50 R 20

Or 35 x 12.50 R20

 

Looking to pull the trigger on wheels/tires before black Friday is over for my '23 Platinum 6.5 bed w/ TRD lift. For wheels I'm going with Method 316 18x9 +18 offset, 28 lbs. I'm pretty set on Toyo AT3 for tires. Used to be a BFG guy but they don't balance for shit and I'm over E load tires. I'm leaning towards Toyo AT3 in 35x12.5R18 (34.5") D load 66 lbs, but then I wondered if that's too heavy or wider than necessary and if 295/70 would be better. I've searched a ton but only found a handful of pics with 295's on a TRD lift and some look fine but others look a little small, even though it's only a 1/4" height difference. My main priority other than bigger tires is maintaining a smooth ride. Not overly concerned with MPG but also don't want to drop below 15 if possible, current avg is 17. I need a decent AT tire since I live in a rural area with snow, rain, dirt roads, and toy hauler camping; so not a street queen but not an overlander.

Looking at:
#1 Toyo AT3 in 35x12.5R18 (34.5") D load 66 lbs. (My instinct pick but maybe too heavy?)
#2 Toyo AT3 in 295/70R18 E load 63 lbs. (Tad lighter than 35s but stiffer E load)
#3 Nitto Recons 295/70R18 Standard Load 53 lbs. (Super light but 3/32" less tread depth and reportedly not as good wet traction)

Just looking for any advice if you went with 35s or 295s for a certain reason, any regrets, etc. Thanks in advance. Talk me out of 35s...if you can.

 

Installed but the jury is out for are Land Cruiser TPMS sensors compatible or not... or are they in the wheels at all?

regardless here's a mandatory side pic

 

Looks good. These wheels including my set just sit on the LC forum with no movement.
Maybe I’ll list them here.

 

Been scouring this thread for days now and can’t find what I’m specifically looking for. I have a 1 inch level and +18 offset, 9 inch wheels. Does anyone definitively know if I can fit 285/75R18 tires (likely Toyo AT3) without any clearance/rubbing issues on an SR5 4WD? I do not have mud flaps. Thanks.

 

Thank you Tundras.com Nation!! Cannot find the darn post, but someone (likely multiple folks) noted that a 295/70r18 would fit a TRD Pro without modification. Was torn between that and a 35x12.5., but went with the 295 in Nitto Trail Grappler. Really close, but no rubbing at full lock, reverse, bumps, etc... Damn better look for sure!! Heavy and noisy.., and bad ass (at least for stock set up). Thanks gang, happy Holidays.

Inner fender Pic is tough to judge.., it is close, but that shot makes it look tighter than it is.

 

2022 Limited stock suspension. No lift. I was going with 35/11.5/20, but Discount tire did not have them in stock but had 295/65/20 in stock. I wasn't sure if they would fit. The guy said, we'll put one on check for rubbing and if it does quite a bit put yours back on and order the 35s. He called and said it fit well, very slight rub at full lock. But only on mud flaps, so I had them installed and removed mud flaps when I got home. Nitto Recon Grappler 295/65/20

 

2025 SR5. Looked at several options, including the Falken Wildpeak, Toyo, and BFG K-Bros. Got the K-Bro 3s, ultimately. Upped from the kind of weird stock size to 275/70/18.

 

37s for sure won't fit without some trimming up front. Even the rear is very tight without trimming. Will have to get another angle

 

A basics question that i have some how not been able to find. I know tGoodrich is rolling various tries sizes with the AT K03 over-the next year but wanted to see what folks have done so far with the K03 that are available. I have 2023 Tundra TRD Limited stock suspension. and basic OEM 265,60,20 wildpeak tire from delaer that need to be replaced. What have folks done if they want the KO3. Is the AT KO3 available in 275/65/20? or just 285/65/20. I don't really want to spend the money on a mod it out but do believe it might be worth the waiting for correct K03 Sizes. Any help is much appreciated from all perspective.

 

Yes, you can get it in 275/65 now.

 

Question for those in snow season parts of the world...do you swap out your wheels/tires to the stock wheels for the winter? Not sure I want my wheels getting salt and whatever else they spray all over the road on them.

 

Anyone have the part number for the black lugs? Or can I grab any black M14x15 off Amazon?

 

Just got my first Tundra 25 limited OR and got a 1.75 lift installed with TOYO OC at3s 285/65/20 on the stock rims. Really happy with the results. I might go bigger when the oem lift fiasco gets resolved but I’m really stoked with what I have now

 

I put 285/60r20 KO3 tires on my 2025 Limited 4x4 one week after purchase. Love everything about the tire, the look and the ride. They fit without rubbing on the mudflaps on a bone stock suspension.

 

can u elaborate what u mean by ‘oem lift fiasco’ thx

 

My assumption was this:
https://www.tundras.com/threads/3”-trd-lift-stop-sale.143569/

 

oh yeah remember hearing about that now, about the tool that was discontinued or something. sucks..
lift is great. might pop in some elkas tho. keep yall posted

 

Thanks to the posters before me, hope this helps someone!

@SCSPerformance Blaze 10 17x8.5 +20 (~22lbs)
Falken Wildpeak A/T4W P285/70R17 SL 116T (53.4lbs)

2024 Platinum stock suspension, no rubbing, maybe 1/2 inch clearance at full.

 

Nice light setup, your only about 3.4lbs over stock.

I went a litter bigger/heavier to fill the wheel wells with a 3” lift.

SCS Blaze10 Gloss Gunmetal 17x8.5 +20 offset 22lbs
BFG KO2 E Rated 315/70R17 64lbs

 

Anyone know the center cap specs and if there are any aftermarket caps that will fit 3rd gen OEM wheels?

 

I believe they are 84mm in diameter. The Toyota ones at least.

 

It looks fantastic! I'd like to know the details of the mods - wheels, tires, sizes, lifted, etc.

 

Same. I'm putting you in charge of a reverse image search!