Loose Panel Under Right Headlight

Hello all,
I have a 2020 Tundra. The small panel under the right headlight is loose. It was slightly popped out previously and I was able to pop it back in. Now it's loose again, it rattles, and it also looks uneven - it's higher up from the bumper than the panel on the left hand side, and the bottom corner is sticking out a bit.
It feels like I could pull it off, but very nervous to try. Just spent ~$60 to replace the small plastic bumper cover that came off.
Any advice or ideas? TIA!

 

requires removing the front grill first. don't just pull it off; if you're able to pull it off it means you've probably damaged one of the mounting points underneath and it's like a $60 part as well to replace that from what I remember. follow this up through step 3:

https://installation.alpharexusa.com/installation-guide-for-14-22-toyota-tundra-headlights/

maybe you're just missing some push clips for the front?

 

The bumper isn't sitting right either.

 

Thank you, I will try that! Check out the bumper while I'm in there too.

 

The trim piece is lined up with the fender and headlight fine. The bumper is the problem. Obviously you or somebody else hit something as the bumper is bent and that’s why the trim piece is rattling.

 

You wouldn’t happen to be near El Paso Texas would you? I have my next to new front bumper off my cav blue tundra just taking up space is why. I’d be happy to give it to a member

 

Thank you, that's really a nice offer, but I'm not close to El Paso.