Ultragauge or ScanGauge 3 Mount and Monitors

Wanna see where and how you mounted your SC3 or Ultragauge. What are you monitoring?

 

That's what I'm thinking. I don't want it in the dash where the sun will kill it. What trans temps do you see driving around? What year Tundra?

 

Mine is a 2020. I will watch it tomorrow but it's under 200 degrees. I have a trans cooler as well.

 

Any other pics of the Scangauge 3 installed? Seems like the Tundra234 install is pretty good as it can easily be hidden from prying eyes by putting a microcloth on top of it, which i usually keep there anyway.

 

modified Offroam cell phone mount.

 

Tackmount

 

What brand of holder is that?

 

Tackform vent mount with a 4.75” tube. https://www.tackform.com/collections/vm14-20-3rd-gen-toyota-tundra-vent-mounts

 

Thank you. Is 4.75" tube the coupler that gots in to the ball joint on the vent mount? Did see tubes in 4.75" in that link?

 

Magnet to the mount?

 

Those vent mounts vibrate.

 

Not one bit

 

Mine did not matter how tight I made it. Of course the SG3 is light compared to a phone.

 

Mine doesn’t vibrate at all with the SG3 - never tried a phone attached to the mount - I use a pro clips mount for my phone on the other side of the wheel. Also attached picture for what I use for OP. Think the part numbers/skus may have changed since I ordered last year?

 

Love my SGIII, does sometimes fail to power up, only once in a while though. I like it mounted high almost in line of sight.

 

https://advtr3d.com/products/scanga...JuQJhlh21Y1AsRXwwAul5nGPbIG1mo5ek-LxNlHtiMRoT

Obviously requires having the Rago or other dash mount plate, but gives you another option...

 

subscribed

 

Are you using it as a stand alone plugged i to the OBD or is it on a splitter?

 

Stand alone plugged into the OBD II port beneath the dash.

 

Mine shares a splitter with my Pedal Monster. Once in a while it doesn't power up but it's strange that yours does it as a standalone.

 

Yea, weird. I believe I have it on some sort of delay whereby it comes on about 5 seconds after ignition, or something like that. Seemed to make sense at set up a while back. Only once in a while does it fail to power up. Maybe 1-2 a month?

 

subscribed

 

@Tundra234 what are you setting your tranny alarm temps at, converter and pan? Thanks. Sorry for the thread drift op.

 

I haven't set the alarms for any of the tranny temps at all since I have a cooler kit installed. Right now i just have alarms set for tire pressure and battery voltage.

 

not @Tundra234 , but I set mine @ 210.

I run it pinned open. I'm in Houston.

it rarely goes over 185 now.

I do not actively monitor TC.

 

Thanks guys. Mine are both set for 230* which I hit on from time to time, and having a ‘21, I’m without a cooler. Love to install one though.

 

This is what I used. Worked with Bailey to develop some mounts for lights on my roof rack

 

Which mount are you using?