Stoptech Front and Rear 380mm BIG brake kit

$2995!!!

New Stoptech brake kits for all four wheels! Yellow calipers. Front calipers six piston, rear calipers four piston, all radial mount style. All rotors are 380mm. Retains stock e-brake. This fits m12 knuckles, but can easily be re-tapped out M14. Some of the rotors have very light surface rust from sitting unpackaged while in storage, very easy to clean up. There are also a couple of chips in the caliper powder coating. These retailed around $6 - $7k… my loss $3900 OBO buyer pays shipping. More pics? Just ask.

 

Thanks! They are some pretty serious stoppers for the money. My barn is simply full of too many goodies… time to pass them on.

 

More info and comparison pics.

With a 1.25 - 1.5” spacer, these should clear the barrels of the 18” BBS Pro wheels. I will verify this for a serious buyer.


Caliper and rotor comparisons.

 

But why are they so.... YEEEEELLLLLLLOOOOOWWWWWW.....??????

 

Lol! I know, not something I would normally go for…. But, it was the only color available when I purchased them. They are anodized under the PC, I planned to strip the yellow off and leave them bare or re-coat in a dark gray or black.

 

For the numbers guys, some (but not all) technical info is intermingled here
https://www.appautomotive.com/wp-content/uploads/2020/10/APP_Armored-Vehicle-Products-2019-9.21.32-AM.pdf

 

Question...... How much are the replacement rotors and brake pads for these?

 

Any oil filter caps lying around?

 

Brake pads are for off the shelf apps, front is Ford F-250 Super Duty with a minor mod to the annulus shape of the pad material (not the backing plate), rear is a Porsche 944/911 and Ferrari pad… all are normal priced and readily available. Stoptech supplies 309 Series sport pads with this kit… 309.07560 F and 309.06080 R. Change the prefix for different compounds, 106, 306… etc. Or pick your favorite brand. Cross the part # or use the pad shape number 756 and 608.

I will have to look up the rotors as I have no info on them. My plan, when worn, was to replace with a floating rotor set up.

 

SOS has the rotors for $548 a pair, front or rear.

 

What’s SOS? I tried googling…

 

Angled vanes on rotors - nice - I have same concept on a 3rd gen 4runner (only 4 pistons/rotor) but WOW do they stop on a dime and the angled rotors keep them extra cool on long descents.

 

SOS https://sosperformance.com/products/stoptech-tr380-bbk-replacement-rotors-380mm

They also have the front and rear kits for $5300. They use ST60 front calipers instead of the ST65 that this kit has, which has larger pads.

 

I never thought to look at SOS for brake stuff. Nice to know now, but I just got new for now. See how long until replacement.
Opinion question - for essentially stock size brake components, is there a definitively better caliper FR and RR than stock?

 

SOS has the OEM replacement rotors for $548/pair.*

Not what the OP is selling.

 

The stock calipers are good for what they are, nice stiff cast iron bodies with 4 big pistons. The pad size is their downfall, it’s decent, but something larger would be better.

SOS is selling the Stoptech 380mm rotors for $548/pair, which are the same units in the kit I am selling.

 

Bump, new price up top. Last chance.

 

Looks awesome bump! Wish I had the coin. GLWS!

 

Somewhat interested. What are you running instead and why? TIA!

 

I’m on stock rotors with Centric Fleet Pads. These 380mm brakes are a little too big for the 18” wheels I plan to run. I have a smaller diameter kit of my own brewing roughed up, and I’ll likely build it at some point.

 

I'd like to know more! putting the biggest brakes in the smallest package is my thing, I've thought about Cayenne's 6 pot (17z, 18z and even 19z) since the swept area would be similar to our 355mm rotors.

 

The Z series Brembo Calipers are a bit too small in piston area for the 2/2.5 gen Tundra… otherwise they would be a nice inexpensive source for a big brake kit. They should work great for a Tacoma or 4-runner, though.

Here’s a little messing around I was doing for my Tacoma… still unfinished. https://www.tacomaworld.com/threads/wicked-big-brakes-for-17-wheels.679537/

 

Too bad they won’t fit 17” wheels