will these fit

owner has no idea what they came off of stamped on rim is 16x7+30mm

willl these fit my 2002 ac 4wd

 

Ask him to measure the bolt hole distance for you. And also the hub bore size.

 

Short answer is yes.

 

so up here pickings are slim. the wheels posted above are an hour away. I asked for more info and this is what I got.. 16x7 +30....6x5.5. another picture said "prime" made in usa Im currently running 5 star wheels off a 2000 4runner with 265/75/16 ko2's. which are my extras for my 4runner. which I need back,,,but when I bought the tundra tires were bald so slapped on the 4runner wheels. I want wheels that dont need spacers etc, can run that size tire. Ive done research but getting mixed readings. one said they are for a tacoma. side note, I want to upgrade to the 13wl and fatter rotors eventufully and have no plans for a lift to make it work

anyone help me out

thanks

 

Prime was really popular back in the 80s/90s for their deep dish 5-stars, blades, 3-spokes, and hammers. I personally would skip on them, but that's just me.

 

VintageWheelCatalogs.com to the rescue... I always wanted some 168s bitd. Everyone had 286s on their IROCs.

 

PS, with those specs, you'll be rolling at -5.2 backspace. That may be pushing it a bit on suspension rub. They will DEFINITELY be fairly tucked into the fender. You'be be advised to probably run spacers, something in the 3/4" - 1" range would likely do it, I think? Don't quote me on that.

 

thanks from what I was reading on this forum ( in searches) that kind of offset would need spacers, so def not worth it...ill pass, but was a good price...and I need a 2nd set of rims...one summer, one winter ( thats what lots of people do here)
..Thanks for all your help

 

Find any 4Runner or Tacoma factory wheel. They'll bolt on fine without rubbing, but look perfect with a spacer. In the Continental US they're everywhere for sale. The great white North may be different.

 

dude are those Mags??? Lol that's an oldddd catalog. Hahaha

Also OP if you're really looking for decent wheels that'll get shipped for free. ScAmazon Rocktrix. Honestly I have nothing bad to say about these. And they were $660 for the set of 4 brand new. You can probably swap out the center cap for something else if you care about being judged by the world lol

 

unfortunately not all prime things ship free to alaska....or Hawaii either

 

so found some oem 2006 tacoma wheels, 17 inch. 6 bolt has mounted 265/70/17s near new snow tires. Size should be little difference as I currently run 265/75/16 and charts show very little difference in diameter.

so before I bite the bullet and drive 45 minutes one way, , your saying any stock tocoma wheel will fit without rubbing

( pickings are real slim up here for used parts)

 

Shoot us a pic of the wheels, but yes.

 

this is faster, 17” Toyota TACOMA OEM Wheel 2005-2015 Rim Factory Original 5 spoke 69463 | eBay

but basically that wheel just rattle canned black, 4 of them

 

Those will indeed fit.

 

thanks, guess I have a little road trip after work

 

Here's what they look like mounted. Yes, they fit. Taco and 4Runner wheels look better with a 1.25" or 1.5" spacer, but they mount just fine without rubbing.

https://www.tundras.com/threads/lets-see-1st-gen-with-toyota-rims.40487/page-26#post-2965364