RainMan Fabrications - Switch Panels and More

Re-installed the front camera today using the shim, works great.
Thanks @RainMan_PNW for a great product.

 

For those following this - I’ve updated the OP to start lining out some of the upcoming additions to the line up.
Links go to dedicated threads inside my vendor section, but the order form will stay here in the marketplace thread.

I need to finalize the numbers and then get the order form updated for the new items.

 

Final prototype print running on a 6-switch panel for in front of the shifter.

 

I'm in!

 

Back in town and working on getting caught up on orders. Thanks for your patience!

 

@RainMan_PNW, Received my switch panel today! These look factory! Nice work Casey, I appreciate it, thanks!

 

Throwing a little advertising to the upcoming Tundras x ToyoMafia collab that kicks off on Friday:

https://www.tundras.com/threads/tundras-x-toyomafia-the-biggest-crew-release-yet-05-03-24.141751/

it’s not often that our favorite forum actually sanctions donning like this, much less does it as a collab release. You don’t want to miss it.

 

Still working on this one at some point?

 

Yes
Finally finding some time to get it dialed in…

 

Sweet!

 

Officially coming soon:
3-switch MagSafe Charger Tray

 

And the 6-switch front tray is close too

 

Bad Ass

 

I guess I need more devices to fill these switch blanks. Nice work Casey!

 

How're the kids doing with their recoveries now? Doing well, I hope?

 

These are now live.
There are officially two in the wild.
They will be made to order and take a little longer to do because I've got to build the power supply too...

 

Today's a two-for...
The 6-Switch Front Tray is now live as well.
There is one officially in the wild already, though I don't think installation has been completed yet.
Also made to order, with a slightly extended lead time (printing is over 9 hours on these)

 

Sorry Adam - I almost missed this one...

Not much change right now.
Bryson still has infection in the left arm. Appointment this coming week (I think) to x-ray and determine if the bone is fully healed. Once it is fully healed, they will schedule a surgery to open him back up and find the source of the infection. If it is in fact the hardware (hard to think it isn't, but who knows), they will remove that while they have him opened up. Then another 6-8 weeks to heal from the hardware removal.

Liv still has numbness along the back of her entire left leg and bottom of her left foot. Also dealing with a lot of back soreness around the area of the hardware/fusion - can't stand or sit for more than about an hour without needing to lay down to relieve it. Met with pain management DR last week and determined they would do a sacral epidural steroid injection to try and alleviate the soreness in the region. It won't do anything for the numbness, but if it relieves some of the back pain it may help get the muscles to relax and allow the nerves to start communicating/healing better. She's also starting a month of counter-strain PT appointments and getting set up with a new regular PT (her previous one went out on maternity leave).

Neither is able to work yet, and they are going stir crazy because of it.

 

Oh damn. I was really hoping for great news about them making huge progress.

 

Sadly, sounds like this one is a 12-18 month sort of thing to know if there will be significant improvement - at least for Liv.
Bryson's on a shorter track provided they finally squash the infection and get that to heal.

 

How's morale? I know that kind of recovery can wear down just about anybody if there's no relief.

 

For the most part, good. They've got a good support network surrounding them for sure.

 

I’m late to the thread, but I have been reading many of your projects while researching on here. You have some skills. I was very impressed with your thread on adding BSM to your TRD Pro and Boost mirrors. Have you ever considered making the wiring harnesses for that conversion? You would have one buyer, right here. I’m still doing the small stuff, but my build has started. Thanks for making these great products

 

Problem is that it’s damn near impossible to “plug and play” that installation without a ton more R&D time.
I have done the install on two other trucks, both “time and material” and it’s not inexpensive.

 

How would you handle the liability of a safety system as well? It's a nice thought, but there is a reason most rear bumper manufacturers don't support BSM on the Tundra.

 

It’s crazy that Toyota builds the same truck in San Antonio, with BSM, ships it across the US and then sells it in Canada. BSM is probably the one feature that would have been nice to have on the Pro.

 

Casey, awesome products and still praying for your daughter and her bf.
That said I’m posting because it looks like the FRAC is going to be available again, hopefully soon. I don’t have a TRD grill just the standard SR5 honey comb. Will your camera mount work with the standard grill?
Or do I even need a special mount using the camera you posted?

 

If you have the standard SR5 honeycomb grill, then you won't need the shim and adapter setup that I offer to be able to mount a camera. Instead, you can directly bolt the camera using this plate (you will still need to source an oversized washer to mate up behind the grill).
Toyota Tundra Sport / SR5 Universal Mounting Bracket | Lights & Camera | Yota Leds