Spyder lights

This is my first post because I am new to the site so hope I did everything right. I installed Spyder led head lights and tail lights today. Very easy install. Plug and play and I got the grill of easily to. That's what was scary.

 

See? Easy peasy.

 

Thanks. I appreciate the advice.

 

Only bad thing was my battery went dead from testing and retesting them.

 

do the light bars in the headlights light up when drl switched to "ON"?

 

Thanks I'll look into that.

 

Welcome from WI Jason! Here We Go Steelers!!!!

 

looking good

 

You're in trouble Now! It's going to cause a landslide of new mods you can do yourself!

 

what he doesnt know is that this is going to be the beginning of a chain of mods!

 

Jason, I can hear your wallet screaming from here

 

yea, i left that part out.

 

Thanks to @duece292 @Berdine @Kdgcng @TheBeast @RowdyRon @GNTundra @smslavin but my wallet has been screaming since 2014 when I bought it brand new. Lights are just my newest mod. Rock star wheels, good year tires, nitto tires, a 6" readylift body lift, weather tech mats, linex bed liner and much more. Thanks for all the comments and Go Steelers!!!!

 

Looking into Spyder lights myself. Do the headlights auto adjust or do you have to do it manually?

 

definitely. i did this. makes a huge difference.

 

I didn't add the hid converter yet but I might.

 

They were already set

 

Auto. The leveling motors can be hooked up to the new Spyders. You have to be careful though, as they are not the easiest to remove from stock and install in the new Spyders.

 

I have the same ones. Yes they do.

 

They are manual, but you can transfer the leveling motors from the stock ones into these. It was pretty easy.

 

With the spyder bar light, is there a way to wire it so it's on with the drls? I'm thinking spyder, hid covert, switch back kit for yellow drl to white and bar light always on. Possible? Experts your opinions.....

 

Very nice. Sounds like you need to create your own build page.

 

Not sure about the Spyders but I did something similar with my Recons. I don't have the factory DRLs so I took the wire for the bar light and used an add-a-fuse on the ignition circuit. Now, they are on whenever the truck is on.

 

Thanks. I'm in a limited so just the u g l y yellow drl. Nice work around. May hit you up for some more info if I pull the trigger on these. Its these or the ba 2018 lights they are trying to harness up with the 14-17 models. Thanks again. Fan of your rig btw.

 

Mine is a Limited as well. I've kept the amber drl on. There's a post around here somewhere about how to disable that. It involves a small gray wire somewhere behind the leveling switch.

 

Isn't there a switch back kit to Keep the turn signal but run white drl, or am I mistaken?