WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Check this out @Eurodriver .

 

Tranmission Recall?

 

Had the 24TA02 transmission recall software update this morning..... in at 715a, out at 830a. Dealer also performed "16 point alignment check" which I didn't ask for.

 

Yes

 

Ahh, I found it... Not sure how I missed that one. Thanks.

 

Well on today’s saga, I previously had the Trd 3 inch OEM lift installed but I hated how it sat in the rear especially if I towed something. So I ordered and installed the Dobinson 220-440lb 2” rear springs in red of course. Before settling, it has given it an extra 3 inches in the rear.

 

Man, that's a dick move. A few years back, some ass drilled a hole in my Jeep tank. Long story short, I mixed up some JB weld and put it over the hole. I had every intention of replacing the tank but it held so I just left it. I sold the vehicle about five years later without ever having a problem.

 

https://a.co/d/7gA6IIq

JB Weld tank repair may get you by till a new tank is found….,

 

How bout a larger size short self tapping screw with a neoprene head to plug the hole. Then JB weld as needed until a new tank is available

 

I had that happen to me on my Tacoma when I first got it. $9XX later it was fixed. Thankfully I was only out $250 insurance deductable.

 

Installed AFE Power front tow hooks. Trimmed the TRD skid plate to fit. My thoughts..... I can't see using these things without causing damage to the front end plastic. Oh well.

 

I have to ask, how is the ride? I’m assuming a little stiffer but acceptable..

 

Same, I basically got mine for an emergency type situation.

 

Did you leave the spacers in from the TRD lift? Seems pretty high for a 2 inch bigger spring.

 

Tinted front 2 and put a RC bed mat in. Super heavy duty mat for $99 on Amazon or their website.

 

Changed out the Grille - Painted the moustache and fender flares : I wanted the Capstone Look but I have a Limited Budget,

BEFORE



AFTER

 

Yes it’s a little stiffer but not bad by any means. I don’t mind it at all. Someone else said it gets better when you add any weight to it.

 

Nope I did not. It’s settling still, already dropped 1/2” so it’s 2 1/2” higher than it was. Should settle a 1/2” more or so I’m told

 

Diamondback SE

 

Added the AJT designs oversized cup holder and center console panel. Like that the panel is not an overlay and actually replaces the gloss black piece. Looks better in my opinion and hopefully doesn’t scratch up like the gloss black piece.

 

That might have to be a future upgrade..

 

Like the cupholders. Why are there so many screws/hole in the cover? Are they functional to attach to the console?

 

Those Allen head screws must be fake.

 

I think they are just for looks to be honest. They aren’t function but they are real Allen screws that I had to put in myself. I could take it or leave it. But the matte black doesn’t scratch show scratches like the gloss black factory one. My truck is a month old and has scratches the day I bought it. So was wanting to change it out. Cup holder was a must cause I usually am just drinking out of a hydroflask so it’s nice it actually fits

 

Really excited when I saw this as I love AJT's stuff, was really bummed to see it's not compatible with the 1794 trim.

 

Shoved it into the garage before the Midwest storm tonight. I really need a shed for my lawn mower and golf cart.

 

Congrats on that massive garage. If I were able to put my tundra into my garage it would barely fit length wise.

 

The side it’s on the garage goes back half a car deeper than the side with my lawn mower and toolbox. I put a work bench area up there but it helps with the length.

 

Crumb/dust holders

 

Technically this was done yesterday. Added rims and tires...

2024 Tundra Platinum 6.5 bed, TRD Off Road Package & TRD Lift Kit
-Method 318, Gloss Black 17X8.5”, 6X5.5” Lug, +25 Offset Wheels
-Cooper Discoverer AT3 XLT 315/70/17 Load Range E
-Had to remove front mud flaps to prevent any rubbing
-Word of advice...always install hub centric rings. It eliminated all steering will shake.