TRD Pro UCA

So you were able to purchase the 2 uca's amd thats it ?

 

Yes. Have you tried ordering from various dealers’ online parts departments? Very easy process.

 

I also bought the UCA from Toyota no problem $400.

 

Too bad they aren’t the red ones…

 

I will try again tomorrow. Did they come with hardware?

 

I bought mine online from my local dealer and picked them up when they came in. Has ball joint installed so no other hardware needed. You can reuse the thru bolt at top. Ball joints come loose very easily by lightly tapping the aluminum upright with a hammer at the ball joint

 

I just ordered mine online from a Toyota dealership.Hopefully I get them. Thank you all for your help on the other part number.

 

I got a fairly decent deal from a Toyota dealership online.

I got an email saying my order was out of stock, but my parts arrived a week later.

 

I just received an email that one of the upper controls had to be ordered but the other was in stock. So I guess my order went through.

 

Did your uca's say "trd" on them ???

 

Did your uca's say trd on them???

 

They did not. They looked like there had been a sticker there based on some gummy residue though.

 

Thanks again for your reply.. I literally just picked them up from the dealership. And I noticed immediately they did not say TRD which I was under the impression they did, because every Google search shows them TRD oh well....

 

That was what I thought.

I had a sneaking suspicion that Toyota only decided to sell the UCAs separate from the lift kit when they had a large enough stock of blems to market.

 

Damn that's a good point

 

I prefer my conspiracy theory.

 

The early UCA have the TRD sticker, mine do I got them 2 years ago.

 

Did you end up having a spare set?

 

Do the TRD UCAs have a zerk fitting for greasing like most of the aftermarket UCAs?

 

Do you have a photo of these?

 

Do you have a photo of these? This part number is on the TRD lift kit install guide, but it differs from the post above this one.

 

Change the 0 to B (Bulk) and it will be the same. They are the same physical part, just a different part number.

The TRD 3-inch Suspension Lift Kit Install Instructions have updated the part numbers to be what they are actually are, instead of the Bulk part number.

 

No.

 

Copy, does this also pertain to the TRD axles? PT362-34310 & PT362-34320?

 

Yes.

 

Is there a difference between the TRD off-road and the TRD pro upper control arms? I’m curious if I need to order TRD control arms if I’m doing a 3 inch lift (no off-roading)

 

If it is a 2024 model year or newer, then yes.

TRD Off-Road is going to have the stamped/welded black steel UCA. TRD Pro is going to have a red billet UCA.

The TRD 3" Suspension Lift Kit has a cast steel UCA that has more adjustment built into it. You will be fine with a stock UCA up to 3".

 

Does both provide more caster? Also do you happen to have the part number for the billet version?

 

Only the TRD 3" Suspension Lift Kit has additional adjustment.

48630-0C030
48610-0C030

 

Where you all buying to get them for $400? link please