GEN 3 (2022+) Wheels and Tires Photo thread

A little better picture after a wash

 

That looks good!!!

 

Icon 6 speed 17x9 +30 wrapped in some 35 BFG Ko2's

 

how much lift you get? I got like 2.5 in front and 1.3 in rear.

 

you get your tires mounted yet?

 

When I bought my FN wheels I regretted buying the black after seeing some pictures of the gunmetal on a MGM taco. I reached out to FN and they made the switch for me without any issue. I know what I asked for really wasn't a huge deal but it was really nice how easy it was.

 

What brand wheels are these? Tried zooming in but got to blurry to read anything.

 

Pretty sure that those wont last long. Put them on the marketplace on this forum or put them on the truck! I would be interested in them if I knew where you were and if you are actual serious about selling them

 

Rays Engineering A-LAP 07x forged wheels they also make the popular Volk line of wheels.

 

I’m in Az north Phoenix, 2500

 

Or you could save $1550 and get them here...

https://raveoffroad.com/products/tr...22-tundra?variant=40123206828067&currency=USD

 

That looks like that’s priced per wheel. It shows a set of four is $3800

 

I haven't received the wheels yet. It will be a couple weeks before I get around to it.

 

Ah! You are right. The description is misleading. Even when one wheel is selected the description says set of four. Lame. Thanks for the catch!

 

I agree, it’s extremely poorly written. I was like maaan, this is too good to be true. Sure enough, haha.

 

Will or can I get this scenario to work?


About to get a 3 inch lift with wheels and tires. Really liking the 22x10 Vossen HF6-4 in satin bronze but they come with a negative -18 offset. Any chance I can get 35x12.50x22 tires to work. What extra steps will need to be done?

 

‘24 SR5 TRD 4x4 Sport
275/60r20 Nitto Recon Grapplers

 

Very nice!

 

looks like those are about the biggest size for a Sport - looks solid!

 

Just put on some 17” method 318’s wrapped in 35/12.5R17 Falken wildpeak R/T.

 

Badass! I'm looking at the same tires except for the factory 20" TRD wheels. How's the ride quality and noise?

 

Thank you!

I love these tires. I’ve got them on my 5th gen 4Runner as well. The 35’s on the tundra hum just a little at certain speeds but it’s very minimal and the ride quality is great (I personally think).

 

Looks better dirty

BFG KO2 37x12.5 on 17” Nomad Saharas 0 offset

 

2024 TRD Sport
RC 1.75 leveling kit
285/60r20 AT3
Fuel Contra +19 offset

 

23’ Toyota Tundra Limited TRD Off Road- 17” Method MR312 wheels 0 offset, 35-12.50-17 Radar Renegade RT. TRD 3” lift, Dobbinsons rear springs coming…

 

Lookin good. What do you think about the 285's so far? I'm tossed up between the 275 or 285. Feel more sluggish off the line at all?

 

Sweet setup, looks great! What suspension setup do you have, and is there any rubbing?

 

i haven’t seen any difference. I thought 275 wouldn’t be out enough and initially I was looking at +25 wheels but on +19 they would. I don’t regret the 285 though, I like the stance and speedometer isn’t off that much, it’s equivalent to 33.5’’ up from 32.5’’

 

thank you! I’m on stock suspension for now. All I’ve done is remove that metal bracket behind the fender liner on the front wheel wells and then I zip tied the liner as far back as I could. There’s a little rubbing at full lock in reverse on the fender liner that’s towards the front of the truck but I just need to trim it a tad and it’ll be totally fine. I can send pics if you were trying to run it the same way.

 

Thanks for the response! I'd totally be interested in pictures if you don't mind sending. I'm looking to get some 35s as well, but am also on stock suspension right now so I was curious as to how you did yours.