GEN 3 (2022+) Wheels and Tires Photo thread

I need some help, i want wheels but i dont know how to calculate offset. i would like to have the tire flush with the flares
I would appreciate any help.

 

+35 is about 1” further out.
+25 is about 1.25” further out which is a bit wider than the stock flared.

 

Ray’s A-LAP 07X 18x8.5 +19 offset with 285/75 18 Toyo’s TRD 3” lift no rubbing at all, with the 18x9 +1 offset Fuel wheels had a little rubbing on the fender liner up front and more poke. Put these wheels on order 8 months ago when I got the truck went with the Fuels as a stop gap until the Rays arrived will now have some Fuel Ammo’s to sell. Very happy with the amount of poke tread is essentially flush with the top edge of fenders and the sidewall sticks out just past, will help keep the truck a little cleaner up here in the PNW. Couldn’t be more happy this was what my vision was when I purchased the truck.

 

Looks good, how about a full truck shot!

Whats the weight on the wheel and tire set up?

 

Tires are 65# wheels I believe are 19# they are lighter than the Fuel’s I had on there before definitely by simply lifting them. Ray’s A-LAP stands for “as light as possible” which is there entire lineup premise being the lightest and strongest forged wheels. Sorry I’ll take a pic tomorrow of the entire truck.

 

THANKS!!! Understood

 

New to the Tundra community, took delivery of my Silver 2024 SR5 XP last week. Today I ordered a leveing kit, and some 20 x 9 +20 Welds w/ Nitto Recon's 275/65/20
Hopefully have everything done next week. Here is a pic of the wheel on a silver RAM.
Thoughts ??

 

That's a damn good looking wheel. What's the weight?

 

According to the CUSTOM OFFSETS & RIMZ ONE websites 31lbs So I figure with the NON LT 34" nittos It should be a nice light weight " CLOSE TO FACTORY WEIGHT " SETUP.
Less than 80lb per corner

 

Not bad at all. . I'm kinda over the all black trend

 

Same here, First truck I setup w/ all black was for my son 14 years ago, then I did my H2 all black after that, I need to see some aluminum

 

Gonna be doing ko2 315 70 17 on an icon 6 speed wheel. Waiting till I get lift on when I get back from vacation.

 

Full truck pic 2023 Platinum 3” TRD lift

 

How are they treating you?

 

I can't say enough good things about RIMZ ONE. They were super helpful, fast, and less expensive on my wheel purchase. They also didn't let a "national backstock" claim on the Fuel website stop them. They reached out directly to their Fuel Rep, and were able to acquire 1 of 2 sets in the USA of the new Fuel Catalyst wheels for me.

 

What is the offset of your wheels?

 

New lift and tires for the group here. Mickey Thompson Baja Boss A/T - 305/70/18.

I’m still in the honeymoon phase as they’ve only been on the truck for 48 hours

 

Switched out the set to the TREX T100 Machined Clear, 20X9 +18.
29lbs forged monoblock, 17" sizes are supposedly coming in next month.

 

Sweet rig. Thoughts on the westcott?

 

2nd and 3rd set, wow!!!!!!!!

 

So far so good. Slight rub with the factory mud flaps so those will probably be getting removed.

I put the tires on same day, so didn’t get to drive it with the lift and factory Falken Wildpeaks. That said, all my feedback is based on the new, larger tires and the lift.

Front of the truck feels significantly higher, marginal loss of cornering performance and gas mileage with a stiffer feel to the ride.

It’s designed specifically for My vehicle which oddly enough I’m told comes from factory with a staggered height in the rear to account for the gas tank being off-center.

Overall, very happy with the outcome from performance to aesthetics and would recommend it. $499 is a sweet deal too.

 

Nice - Good info. We have the same truck except I'm running 295's with the stock suspension so I'm thinking i wont have the same rub as you. I am interested in lifting the truck up a bit so have been doing research on the westcott. Thanks!

 

I am still trying to decide between the 305's and 35's MT Baja Boss AT's. Truck looks sweet!

 

Depends on what your using it for .

 

Off topic, what cross bar is that in the bed? Do you have a good photo of it? Looking for something like that for a place to put bike fork mounts when i add a roll up bed cover.

 

2023 SR5 with TRD Lift Kit. Falken 37" RT-01 tires on Method wheels (+40mm offset).

 

17x8.5-10 with OC AT3

 

I had very minimal rub with the 295/65r20 tires. Almost non existant. I replaced those with 37on18's. Those Rub the sway bar! Doesn't bother me, but there is hard contact.

 

KB VooDoo cross bars

https://www.kbvoodoo.com/all-prox-crossbars/prox-tundra-crossbars-2022-and-up

 

That sits very nicely!
The +40 offset sits way more flush than I would have thought it would.

Looks good!