A near bolt in Decked Drawer System for 1GT's!

So the 2020-Current Tundra XT4 Decked Drawers are a direct fit for the 1GT Access Cabs (no double cabs, unfortunately). Watch the video and let me know if you have any questions!

 

Awesome. I'm gonna go back and link this into the thread dealing with the topic for some hot linkback action.

Doin' the boys proud with the garb too.

​

 

Looks great. Can wait to have something fit my double cab out the box

 

My hometown hero’s I miss them and seeing them play all the time

 

Not sure decker will ever release a true first gen kit unfortunately

 

You can spend a third, maybe even a quarter of the money and build you your own drawer system with little-to-no experience woodworking or building. There are many YT vids about it.

Using 8020 is also a great option.
https://8020.net/

 

Yes, many many good YT videos on building a drawer system.

 

He’s right. I built some in my last truck it’s a great option.

 

JimBob, yours looks sick, you're crushing it with adapting existing products to work in the 1GT!

 

I HEART THIS

 

Hey @inv3ctiv3 , what’s that fancy tool that you used when you cut the sides of your bed platform?

 

Not @inv3ctiv3 but essentially an oscillating tool. I have one, it's a Multimax: https://www.dremel.com/us/en/p/mm50-01-f013mm50af

 

No, he used a tracer tool in his vid. Not the decked vid, but a previous one

 

https://amzn.to/493pjbs

 

Nice. This looks like it would be an awesome fit on my AC with the bed topper and windoors. Not sure if I'll be able to sit up if I'm sleeping back there...

 

If it's a normal height topper I doubt it but if it's a high roof then you should be able to. I believe the decked is 12" high.

 

Someone in the comments said that 2017 Nissan frontier system fit their Double cab.

 

Can anyone confirm a near fit for the double cabs?

 

For a 3rd gen shell? Or the Frontier system? You didn’t quote a post and the last several posts are talking about multiple different things.

 

It’s overpriced

 

credit @455h0le_dachshund for the find

 

I was able to pickup a Decked drawer system off of craigslist this weekend for $250. It was in a 2017 Ford F-350 which I thought I had read before was pretty close to fitting a double cab 1st gen so I pounced on it.

Installation wasn't terrible. I essentially made a cardboard template of the bedside and transferred it to the decked. Then I flipped it to the other side and then measured the width of the marks. I compared it to the measurements on the truck and realized that to get it to fit I had to bring it in about an inch or so so I bumped in the template an inch per side and retraced.

I used a jigsaw with a plexiglass blade to cut it and it went through like butter. I got the drivers side in first and used a jigsaw, oscillating tool, and grinder to slowly tweak the fit so it fit the contour of the bedside as best I could. I really only had to fit it at the front and rear corners. The Ford must have narrower bedsides in the middle as the plastic was already sucked in there in the middle and left a gap compared to my bed.

I then slid in the passenger side did the same thing until I could get the seam in the middle to fall into place. Then it was simply a matter of bolting in the 4 corners using the j bolts.

I just got it installed a few minutes ago so I don't know how it'll be long term but it seems pretty good so far.

The length seems perfect on the double cab (my truck is a 2005) from the F350 so all I needed to do was trim the four corners.

 

Looks great!

 

If you look through the comments on my video a guy confirms that the XT4 fits the double cabs!

 

$700 Springs, TX

 

EDIT: I don't read the fine print

 

Wrong year, I believe. Need 2022+, that's for up to 2021.

 

I would believe this to be a FGT

 

Ah yes, looks like a DC. The link I gave above only works for AC. @Vader03 is an '03, so AC or RC (I'll assume best cab/AC)