2.5 Gen Bumpers!

I’m eyeballing the RCI bumper since I’m getting ready to order skids from them. Anyone get this bumper yet?

 

Do you need a winch in this bumper?

 

Yes

 

Then you need a large clutch access window. My WARN bumper has it barely enough for my hand. You want something no less.

 

Happy new year guys, figured I'd cross post this here

Just uploaded a video of my IRONMAN 4X4 RAID bumper after 2 years of ownership.

 

The RCI looks a lot like the C4 bumper from what I can see. Looking forward to seeing the RCI on a Tundra in person or on here.

 

But RCI does their bull bar height just low enough to not interfere with the non Pro grilles. Which is huge if you don't want to drop another 800 for a grille. Hoping to pick the RCI later this year too.

 

I have the Pro grill already. I’m actually thinking no bull bar on whatever I end up getting. I like the clean look without it but the extra protection would be nice.

 

Well, mine is strapped on a pallet at Demello and ready to ship it sounds like. Little luck it will ship out today, I couldn’t be much further away from their location. Here’s to a speedy truck ride or 4 across the country.

 

CBI Baja is another option, doesn't interfere with non-pro radar (but looks kind of close to it)

 

Just installed the C4 Hybrid. I love the flexibility with lighting options.

 

SOB Fabrication has the high clearance full wrap that works with all the fancy gadgets.

 

Got my C4Fab bumper mounted tonight, couldn't be happier. I think I'm going to bump up my 6112s to the top clip, they're currently in the 3rd clip.

 

Might be easier to add a shim instead of taking the shock apart.

 

Good call! I have 1 on the driver's side already, but I think you can add 1 more for a total of 2....is that correct?

 

Depends what size you have installed. I believe you can stack 2 of the thinner ones. Its all about thread protrusions and being able to secure the shock correctly.

 

That makes sense. I have 1 1/4" coachbuilder shim on the driver's side right now. I thought I've heard ppl putting 2 of those in there, but I could be wrong.

 

I don’t think the freight company slowed down to even grab a bite to eat! Left the west coast Tuesday afternoon and hit the east coast earlier today.

 

Glad to see you finally got it! What do you plan on coating it with? Paint? PC? LineX?

 

Anyone know what brand bumper this is? Or who may have made it? Maybe it’s a one off. I found these pictures on facebook back in 2017

 

Product called Steel-It, stainless steel paint pretty much. Wish I would have known the weather would have been as nice as it was today and I would have got started on it. With work it may be a week or two before I’m able to really start it.

 

it's an addicted offroad bumper
https://addictedoffroad.com/index.php?main_page=product_info&cPath=30&products_id=19

 

Thank You Ryuu!

 

Nice looking bumper. Will it fit a 2020? Site says 2007-2014.

 

yea its a nice looking bumper for sure. noticed that too so not sure, personally would call the company and ask before purchasing

 

It may fit, but that bull bar will block your TSS sensor.

 

The bull bar appears to be well above the pro grill TSS sensor but it may block the TSS sensor in the non-pro grill.

 

How did you remove the C4 badge in the lightbar? Did you request from factory to be removed or you cut yourself?

 

I have an EAG Raptor grille which places my TSS at the same height as non-trd pro but about 3-4 inches further behind closer to the radiator. You think it'll affect the radar?

 

That's hard to say. My guess would be no, it wouldn't, but have a plan for the worst just in case. Or maybe look into their other CBI bumpers, the one with full lights protection looks interesting as well